Skip to content

Latest commit

 

History

History
22 lines (12 loc) · 1.15 KB

README.md

File metadata and controls

22 lines (12 loc) · 1.15 KB

MALVEKE for Flipper Zero - Installer

To update the firmware of the board, follow these steps:

  1. First, disconnect all modules (GPS, CC1101, and NRF modules), and remove the cartridge. Leave the board with nothing connected.

  2. With MALVEKE connected to the flipper, connect the Flipper Zero to your computer via USB.

  3. On the Flipper Zero, navigate to the GPIO menu and select "USB-UART Bridge."

SnlXP2zIsJppwcA-JvIlx_monosnap-miro-2023-10-16-12-16-56

  1. In MALVEKE press the "BOOT" button and while keeping it pressed, press the "RESET" button and Release both.

  2. Go to https://flipperzero.json.cl and click on the "INSTALL MALVEKE FIRMWARE" button.

Captura de pantalla 2023-11-07 a la(s) 01 21 10

  1. Wait for the entire transfer process to complete.

  2. Once the transfer is finished, press the "RESET" button on the MALVEKE board.

Your firmware is now successfully updated!