ls104x-uboot-bootpart.wks.in

# short-description: Create SD card image with a boot partition
# long-description:
# Create an image that can be written onto a SD card using dd for use
# with Layerscape lx1043a/ls1046a family.
# It uses u-boot.
#
# The disk layout used is:
#  - ----- --------- -------------- --------------------
# | | PBL | FIP     |  FMAN-UCODE  |  boot +  rootfs    |
#  - ----- --------- -------------- --------------------
# ^ ^     ^         ^              ^
# | |     |         |              |
# 0 4kiB  1MiB    9MiB           16MiB
#
part PBL --source rawcopy --sourceparams="file=${IMAGE_FILE_PBL_SD}" --ondisk mmcblk --no-table --align ${IMAGE_OFFSET_PBL}
part FIP --source rawcopy --sourceparams="file=${IMAGE_FILE_FIP_UBOOT}" --ondisk mmcblk --no-table --align ${IMAGE_OFFSET_FIP}
part FMAN-UCODE --source rawcopy --sourceparams="file=${FMAN_UCODE}" --ondisk mmcblk --no-table --align ${IMAGE_OFFSET_FMAN_UCODE}
part /boot --source bootimg-partition --ondisk mmcblk --fstype=ext4 --label boot --active --align 16384 --extra-space 0
part / --source rootfs --ondisk mmcblk --fstype=ext4 --label rootfs --align 16384

bootloader --ptable msdos