Using Bicubic instead of Lagrange?

[gewoonivar]

Is there a possibility to change to Bicubic bed mesh?

My K1 Max (1.3.3.8) with KAMP via Helperscript is always using Lagrange, which is also under SAVE_CONFIG defaults:

Where to change / modify the configuration?

[jaxxtheone]

I did add "bicubic" yesterday and it is working flawlessly. Just modify your printer.cfg for your like.

[gewoonivar]

Strange, adjusted my config, but doesn't seem to work for me.
Also tried probe count 7,7 but has no effect.

[jaxxtheone]

All I read started on this page:

https://www.klipper3d.org/Bed_Mesh.html

Hope it helps, maybe there's something you find that I didn't notice. I did.

[jaxxtheone]

Just redid it: Please read it from bottom to top:

16:04:24
// Smart Park location: 10,10
16:04:24
// Bed Mesh state has been saved to profile [kamp]
// for the current session. The SAVE_CONFIG command will
// update the printer config file and restart the printer.
16:04:24
// Bed Mesh state has been saved to profile [default]
// for the current session. The SAVE_CONFIG command will
// update the printer config file and restart the printer.
16:04:24
// Mesh Bed Leveling Complete
16:04:24
// probe at 215.000,215.000 is z=-0.129520
16:04:11
// probe at 180.000,215.000 is z=-0.152201
16:04:06
// probe at 145.000,215.000 is z=-0.116771
16:04:00
// probe at 110.000,215.000 is z=-0.049437
16:03:55
// probe at 75.000,215.000 is z=0.003392
16:03:50
// probe at 40.000,215.000 is z=0.043656
16:03:44
// probe at 5.000,215.000 is z=0.080469
16:03:38
// probe at 5.000,180.000 is z=0.067594
16:03:32
// probe at 40.000,180.000 is z=0.071875
16:03:27
// probe at 75.000,180.000 is z=-0.002687
16:03:22
// probe at 110.000,180.000 is z=-0.056937
16:03:16
// probe at 145.000,180.000 is z=-0.108375
16:03:11
// probe at 180.000,180.000 is z=-0.090088
16:03:05
// probe at 215.000,180.000 is z=-0.136312
16:02:59
// probe at 215.000,145.000 is z=-0.118688
16:02:53
// probe at 180.000,145.000 is z=-0.084750
16:02:48
// probe at 145.000,145.000 is z=-0.035354
16:02:42
// probe at 110.000,145.000 is z=-0.015688
16:02:37
// probe at 75.000,145.000 is z=0.006740
16:02:32
// probe at 40.000,145.000 is z=0.042906
16:02:26
// probe at 5.000,145.000 is z=0.045125
16:02:19
// probe at 5.000,110.000 is z=0.047188
16:02:14
// probe at 40.000,110.000 is z=0.062460
16:02:09
// probe at 75.000,110.000 is z=0.031156
16:02:03
// probe at 110.000,110.000 is z=0.002125
16:01:58
// probe at 145.000,110.000 is z=-0.022531
16:01:53
// probe at 180.000,110.000 is z=-0.044124
16:01:47
// probe at 215.000,110.000 is z=-0.074656
16:01:40
// probe at 215.000,75.000 is z=-0.045312
16:01:35
// probe at 180.000,75.000 is z=-0.001500
16:01:30
// probe at 145.000,75.000 is z=-0.000750
16:01:24
// probe at 110.000,75.000 is z=0.013219
16:01:19
// probe at 75.000,75.000 is z=0.052302
16:01:13
// probe at 40.000,75.000 is z=0.068562
16:01:08
// probe at 5.000,75.000 is z=0.059199
16:01:01
// probe at 5.000,40.000 is z=0.074813
16:00:56
// probe at 40.000,40.000 is z=0.085844
16:00:50
// probe at 75.000,40.000 is z=0.087500
16:00:45
// probe at 110.000,40.000 is z=0.094687
16:00:40
// probe at 145.000,40.000 is z=0.067906
16:00:34
// probe at 180.000,40.000 is z=0.012531
16:00:29
// probe at 215.000,40.000 is z=0.068094
16:00:22
// probe at 215.000,5.000 is z=0.141969
16:00:17
// probe at 180.000,5.000 is z=0.124938
16:00:11
// probe at 145.000,5.000 is z=0.132281
16:00:06
// probe at 110.000,5.000 is z=0.117813
16:00:01
// probe at 75.000,5.000 is z=0.163437
15:59:55
// probe at 40.000,5.000 is z=0.136037
15:59:50
// probe at 5.000,5.000 is z=0.164438