Replies: 5 comments
-
|
Make sure you have access to this URL on your network: https://bin.entware.net/mipselsf-k3.4/ |
Beta Was this translation helpful? Give feedback.
-
Same thing for me, I used VPN on my router |
Beta Was this translation helpful? Give feedback.
-
|
@Guilouz The main url that you use for Entware has been broken for a while now. https://bin.entware.net/mipselsf-k3.4/ no longer exists. If you edit the script specifically for entware then comment out https://bin.entware.net/mipselsf-k3.4/ and uncomment the second address it will download. I was hoping that someone else would mention this. It's not been working for me for a while now. That was the workaround that I found. |
Beta Was this translation helpful? Give feedback.
-
|
This is off a fresh install that I just did about 5 minutes ago.
If you uncomment "#URL="http://www.openk1.org/static/entware/mipselsf-k3.4/installer" and comment URL="https://bin.entware.net/mipselsf-k3.4/installer" then run the helper script and install Entware. It will install. I think the link for the site is just broken in general. echo -e "Info: Downloading opkg package manager..." |
Beta Was this translation helpful? Give feedback.
-
|
Here are the results once the change is made:
|
Beta Was this translation helpful? Give feedback.
-
Hey, everybody. Printer k1c - latest firmware installed. I rooted the printer 2 weeks ago and everything was fine. Now also installed - everything installs, all scripts are installed but does not download entware - just hangs on download and that's it. What can be the problem!? Reset has already done 2 times. The problem remains.
I am from Ukraine and it turns out the main domain does not work but the secondary domain works - but it does not connect to it and tries to download from the main domain.
Beta Was this translation helpful? Give feedback.
All reactions