M600 causes to extract filament twice

[wKich]

My suggesting is for some reason resuming printing starts from a few gcode commands above PAUSE and it triggers M600 again

Here is logs

12:19 wait temp start
12:04 pressure_advance: 0.030000 pressure_advance_smooth_time: 0.040000
12:04 Restarting print...
12:04 idle_timeout: Timeout set to 99999999.00 s
12:03 Loading and purging filament...
12:03 Starting hotend heating...
12:03 Run Current: 0.70A Hold Current: 0.70A
12:02 Replace filament at the extruder inlet and click on Resume button!
12:02 Run Current: 0.28A Hold Current: 0.28A
12:02 idle_timeout: Timeout set to 900.00 s
12:01 Extracting filament...
12:01 Print paused for filament change!
12:01 z_safe = 46.80184285148901
12:01 EXCLUDE_OBJECT_END NAME=А_ID_0_COPY_0 does not match the current object NAME=None
12:01 {"code":"key61, "msg":"Unknown command:ACCEL_TO_DECEL=2500", "values": ["ACCEL_TO_DECEL=2500"]}
12:01 Restarting print...
12:01 idle_timeout: Timeout set to 99999999.00 s
12:00 Loading and purging filament...
12:00 Starting hotend heating...
12:00 Run Current: 0.70A Hold Current: 0.70A
11:58 Replace filament at the extruder inlet and click on Resume button!
11:58 Run Current: 0.28A Hold Current: 0.28A
11:57 idle_timeout: Timeout set to 900.00 s
11:57 Extracting filament...
11:57 Print paused for filament change!
11:57 z_safe = 46.80184285148901

And actual gcode

G1 X175.62 Y192.222 E.05374
SET_VELOCITY_LIMIT ACCEL=12000 ACCEL_TO_DECEL=6000 SQUARE_CORNER_VELOCITY=12
G1 X175.112 Y192.222 F15000
SET_VELOCITY_LIMIT ACCEL=5000 ACCEL_TO_DECEL=2500 SQUARE_CORNER_VELOCITY=7
G1 F6000
G1 X174.274 Y191.383 E.03588
; stop printing object А id:0 copy 0
;LAYER_CHANGE
;Z:3.2
;HEIGHT:0.2
;BEFORE_LAYER_CHANGE
;3.2
G92 E0
TIMELAPSE_TAKE_FRAME

G1 E-.42 F2400
;WIPE_START
G1 F6000
G1 X174.981 Y192.09 E-.18
;WIPE_END
EXCLUDE_OBJECT_END NAME=А_id_0_copy_0
;_SET_FAN_SPEED_CHANGING_LAYER
G1 E-.4 F2400
; filament end gcode 
M600
M106 P2 S178
M106 S255
M106 S51
M106 P2 S127
; MANUAL_TOOL_CHANGE T1
M104 S220 ; set nozzle temperature
; filament start gcode
SET_PRESSURE_ADVANCE ADVANCE=0.03; Override pressure advance value
; printing object А id:9 copy 0
SET_VELOCITY_LIMIT ACCEL=12000 ACCEL_TO_DECEL=6000 SQUARE_CORNER_VELOCITY=12
EXCLUDE_OBJECT_START NAME=А_id_9_copy_0
G1 Z3.2 F15000
G1 X53.273 Y81.808
G1 Z3.2
G1 E1 F2400
SET_VELOCITY_LIMIT ACCEL=5000 ACCEL_TO_DECEL=2500 SQUARE_CORNER_VELOCITY=7
;TYPE:Inner wall
;WIDTH:0.399999
G1 F9000
G1 X53.426 Y81.634 E.00654
G1 X53.589 Y81.305 E.01037
G1 X56.655 Y71.418 E.29216

I use 1.3.3.5 firmware and the latest version of scripts

[wKich]

Never mind, It seems I forgot to reload my printer after update...

[wKich]

Hm... it happened again. I don't know why, but when I printed benchy it worked perfectly, there was not issues or double execution of M600, but when I print different model with multiple objects on a plate I get this behaviour.

[bootkittt]

im having same issue as you too right now, any fix?

[wKich]

I tested it one more time and my previous suggestion hadn't been confirmed. So right now I have two options why it might happen:

• Enabled Exclude objects and Label objects
• Objects names contain unicode symbols

[Pikasso-Nik]

• Enabled Exclude objects and Label objects

I also couldn't figure out why there was a double action when doing a pause.
Thanks to your message, I excluded Exclude objects and Label objects in OrcaSlicer, and now everything works correctly.
Thank you!