Script, fluidd after update Moonraker doesnt work

[DBRUNOEnder]

Hello guys,
today o updated moonraker and my fluidd 502 Bad Gateway nginx/1.17.7.
I tried factory reset via Script, Creality Utility, Downgrade FW, Upgrade FW. Nothing worked.
Can You please help?

[Thunderstorm293]

Hello, I have the same problem as DBRUNOEnder.
Please help us.

[Jonweb08]

Hello, same problem!

[TannerDeLucia]

Same issue for me as well.

[djcdude95]

Same issue happened to me today too!

[Guilouz]

Can you try this :

• Connect to SSH and run these commands (one at time):

/etc/init.d/S56moonraker_service stop

cd /usr/data/moonraker/moonraker-env/bin

python3 -m pip install --no-cache-dir "dbus-fast<=2.28.0"

/etc/init.d/S56moonraker_service start

[fuelvolts]

This isn't working for me. When I run the python command, I get "

WARNING: Running pip as the 'root' user can result in broken permissions and conflicting behaviour with the system package manager. It is recommended to use a virtual environment instead: https://pip.pypa.io/warnings/venv".

The service never starts even with the service start commend. Fluidd doesn't connect.

I even factory reset my K1 SE and ran the K1 install script again, still not working, even with these commends. There must be an error in the K1 script or Moonraker.

[Guilouz]

This isn't working for me. When I run the python command, I get "

WARNING: Running pip as the 'root' user can result in broken permissions and conflicting behaviour with the system package manager. It is recommended to use a virtual environment instead: https://pip.pypa.io/warnings/venv".

The service never starts even with the service start commend. Fluidd doesn't connect.

I even factory reset my K1 SE and ran the K1 install script again, still not working, even with these commends. There must be an error in the K1 script or Moonraker.

Remove Moonraker and Reinstall from Helper Script, I have rebuilded a new venv.

[1280MHz]

Thank you Guilouz,

Managed to finally resolve the issue by removing "Moonraker and Nginx" then reinstalled package as per your post.

Really appreciate your help, all the best to you.

[MatzeX71]

worked also for me, thanks very much!

[DrFailbucket]

Thanks @Guilouz that worked for me also (using Mainsail) but after that my Toolhead Controls were gone, any idea why?

[Thunderstorm293]

[Guilouz]

Try:

python3 -m pip install --no-cache-dir "dbus-fast<=2.28.0"

[fuelvolts]

I also have this issue. Can't connect to Fluidd. Seems that Moonraker doesn't seem to want to start.

[SPACEMONKEY-01]

@Guilouz I ran your commands from above and still not working. Appreciate any help and as always, thank you.

[SPACEMONKEY-01]

Working now. TY @Guilouz!!!

[Jonweb08]

@Guilouz thanks a lot! works!

[nickboul]

@Guilouz i uninstalled and installed back the moonraker and nginz and the problem exists.

Moreover I run the commands you mentioned but i still face the same issue.

Please advise

[nickboul]

@Guilouz i uninstalled and installed back the moonraker and nginz and the problem exists.

Moreover I run the commands you mentioned but i still face the same issue.

Please advise

Moreover when i enter the commands I get the following error:
root@K1Max-7E7B /root [#] /etc/init.d/S56moonraker_service stop
start-stop-daemon: warning: killing process 1458: No such process

[cadbob]

Same Issue this morning actually just started another thread as did not see this one!
Log into Root with Helper Script
Remove 1 MoonRaker
Reinstall MoonRaker
PROFIT

But there must be a bug in recent Update?

After the Bad Update, Orca and Bambu (both use MoonRaker) would not connect to K1Max, Creality Slicer would (Dont Use MoonRaker)
This is what lead me to issue being the MoonRaker Update.

I was just printing and connecting fine before updating. :)

[nickboul]

Just got an update on the helper script and after the update the problem is solved.

[nickboul]

Just got a notification for a helpher script update. This solves the issue.