Connect Deye hybrid 3 phase inverter to a JBD BMS

[goofybms]

Dear community. I am a novice in terms of RS485, Can Bus etc, but need to know if the mentionned Inverter can communicate with the JBD BMS. Here is the Link: https://fr.aliexpress.com/item/1005005061460783.html?spm=a2g0o.productlist.main.3.2e8e37e43LSdA1&algo_pvid=fe4da7ad-2fe1-4c0f-a117-8d544999b5c8&algo_exp_id=fe4da7ad-2fe1-4c0f-a117-8d544999b5c8-1&pdp_ext_f=%7B%22sku_id%22%3A%2212000031491252485%22%7D&pdp_npi=2%40dis%21EUR%21157.14%21111.57%21%21%21%21%21%40210217c716743613810921954d06bc%2112000031491252485%21sea&curPageLogUid=GWLkeeSmF7yz

Is there any software that needs to be uploaded? Any help will be appreciated.

Kind regards

[Louisvdw]

I don't think the Deye has a controller that you can add drivers too.
So that means the battery needs to be what the firmware can handle. Thus if it does not spesificly say it is supported, then it will not work.

[goofybms]

Dear Louis Since i wrote the message on github, i found out that the Seplos bms works with the Deye inverter from Andy from off grid garage and also from a french guy who confirmed it too. Just waiting for the new confirmation from my client to order both: inverter+seplos bms Thank you for your help Marcel

…

On Thu, 26 Jan 2023, 20:08 Louis Van Der Walt, ***@***.***> wrote: I don't think the Deye has a controller that you can add drivers too. So that means the battery needs to be what the firmware can handle. Thus if it does not spesificly say it is supported, then it will not work. — Reply to this email directly, view it on GitHub <#429 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/A5MSXK2NPYW5XXBHCEK6FR3WULDR5ANCNFSM6AAAAAAUCYQZOU> . You are receiving this because you authored the thread.Message ID: ***@***.*** com>