diff --git a/docs/Edge/NVIDIA_Jetson/Carrier_Boards/A608/A608_Flash_JetPack.md b/docs/Edge/NVIDIA_Jetson/Carrier_Boards/A608/A608_Flash_JetPack.md index 7ea84faa74c1..2db04b88e2eb 100644 --- a/docs/Edge/NVIDIA_Jetson/Carrier_Boards/A608/A608_Flash_JetPack.md +++ b/docs/Edge/NVIDIA_Jetson/Carrier_Boards/A608/A608_Flash_JetPack.md @@ -1,5 +1,5 @@ --- -description: A608 Carrier Board +description: This article provides a detailed guide on how to flash the JetPack operating system onto the A608 carrier board, which supports NVIDIA Jetson Orin NX/Nano modules. It covers everything from the prerequisites and entering force recovery mode, to downloading the system image and drivers, and finally flashing the operating system onto an NVMe SSD, USB flash drive, or SD card, ensuring that users can successfully complete the system installation and startup. title: A608 Carrier Board keywords: - Edge @@ -182,6 +182,66 @@ You will see the following output if the flashing process is successful. After flashing, power on Jetson Device again and log into the system. + + + +## Download the system image package to the PC host + +Here we will use NVIDIA L4T 36.3 to install Jetpack 6.0 on the A608 Carrier Board with Jetson Orin NX module. + +**Step 1.** [Download](https://developer.nvidia.com/embedded/jetson-linux-r363) the NVIDIA drivers on the host PC. The required drivers are shown below: +
+ +**Step 2.** [Download](https://recomputer-jetson.oss-us-west-1.aliyuncs.com/A608/608_jp60.zip) peripheral drivers and put all the drivers in same folder. + +Now you will see three compressed files in the same folder: + +
+ + +**Step 3.** Prepare system image. + +Open a terminal window on the host PC and run the following command： + +```sh +cd +sudo apt install unzip +tar xf Jetson_Linux_R35.4.1_aarch64.tbz2 +sudo tar xpf Tegra_Linux_Sample-Root-Filesystem_R35.4.1_aarch64.tbz2 -C Linux_for_Tegra/rootfs/ +cd Linux_for_Tegra/ +sudo ./apply_binaries.sh +sudo ./tools/l4t_flash_prerequisites.sh +cd .. +unzip a608_jp60.zip +sudo cp -r ./608_jp60/Linux_for_Tegra/* ./Linux_for_Tegra/ +``` + +**Step 4.** Flash the system to A608. + +- Flash to NVMe + ```sh + cd Linux_for_Tegra + sudo ./tools/kernel_flash/l4t_initrd_flash.sh --external-device nvme0n1p1 -c tools/kernel_flash/flash_l4t_external.xml -p "-c bootloader/t186ref/cfg/flash_t234_qspi.xml" --showlogs --network usb0 jetson-orin-nano-devkit internal + ``` +- Flash to USB + ```sh + cd Linux_for_Tegra + sudo ./tools/kernel_flash/l4t_initrd_flash.sh --external-device sda1 -c tools/kernel_flash/flash_l4t_external.xml -p "-c bootloader/t186ref/cfg/flash_t234_qspi.xml" --showlogs --network usb0 jetson-orin-nano-devkit internal + ``` +- Flash to SD + ```sh + cd Linux_for_Tegra + sudo ./tools/kernel_flash/l4t_initrd_flash.sh --external-device mmcblk1p1 -c tools/kernel_flash/flash_l4t_external.xml -p "-c bootloader/t186ref/cfg/flash_t234_qspi.xml" --showlogs --network usb0 jetson-orin-nano-devkit internal + ``` + +You will see the following output if the flashing process is successful. + +
+ +After flashing, power on Jetson Device again and log into the system. + + + ## Tech Support & Product Discussion diff --git a/docs/Edge/NVIDIA_Jetson/FAQs/Use_IMX477_Camera_with_A603.md b/docs/Edge/NVIDIA_Jetson/FAQs/Use_IMX477_Camera_with_A603.md index 368f93e55ead..3daaf60579b7 100644 --- a/docs/Edge/NVIDIA_Jetson/FAQs/Use_IMX477_Camera_with_A603.md +++ b/docs/Edge/NVIDIA_Jetson/FAQs/Use_IMX477_Camera_with_A603.md @@ -12,12 +12,31 @@ last_update: author: Youjiang --- -If you need to use the IMX477 camera, please download [this driver package](https://nv-jetson-images.oss-us-west-1.aliyuncs.com/A603/A603_JP5.1.2_IMX477.zip?OSSAccessKeyId=LTAI5tKm7UD2hmuFW85cz42T&Expires=2716365967&Signature=YMt2c0DbGhA9S9WOAEJ97HqIXXE%3D) and follow [this tutorial](https://wiki.seeedstudio.com/reComputer_A603_Flash_System/) to reflash the Jetpack system. +## Jetpack 5.1.2 + +If you need to use the IMX477 camera, please download [this driver package](https://recomputer-jetson.oss-us-west-1.aliyuncs.com/A603/603_imx477_jp512.zip) and follow [this tutorial](https://wiki.seeedstudio.com/reComputer_A603_Flash_System/) to reflash the Jetpack system. :::caution Please note that you need to use the BSP for [ **JP5.1.2** ](https://developer.nvidia.com/embedded/jetson-linux-r3541). ::: +## Jetpack 6.0 + +If you need to use the IMX477 camera, please download [this driver package](https://recomputer-jetson.oss-us-west-1.aliyuncs.com/A603/603_imx477_jp60.zip) and follow [this tutorial](https://wiki.seeedstudio.com/reComputer_A603_Flash_System/) to reflash the Jetpack system. + +:::caution +Please note that you need to use the BSP for [ **JP6.0** ](https://developer.nvidia.com/embedded/jetson-linux-r363). +::: + +After the system flashing is completed, connect the CSI camera and use the following command to start the camera: + +```bash +nvgstcapture-1.0 --sensor-id=0 +``` + +
+ + ## Tech Support & Product Discussion Thank you for choosing our products! We are here to provide you with different support to ensure that your experience with our products is as smooth as possible. We offer several communication channels to cater to different preferences and needs.