LoRaWAN Sensor Node | Seeed Studio Wiki

[giscus[bot]]

LoRaWAN Sensor Node | Seeed Studio Wiki

Lorawan sensor node based on Wio SX1262 with XIAO esp32s3 module

https://wiki.seeedstudio.com/wio_sx1262_xiao_esp32s3_for_lora_sensor_node/

[KARTHIKEYAN4]

Hi , in the above example code how to switch Class A & Class C devices and Downlink source code is not available

[KARTHIKEYAN4]

Hi , in the above example code how to switch Class A & Class C devices and Downlink source code is not available

[cure123123]

Sorry for the late reply. Regarding the first question, it is recommended that you refer to the GitHub of Radiolib and adjust the code to configure it as the corresponding Class A or C. As for the second question, could you please provide me with more information? We have verified that it works, which will facilitate me to provide technical support.

[pulkitjn97]

Refer to this example from RadioLib:
https://github.com/jgromes/RadioLib/tree/master/examples/LoRaWAN/LoRaWAN_Starter

[michapr]

Would be nice to see a deep sleeping sample code.
I cannot get low current - in any case only the SX1262 module take about additional 600uA while sleeping - so a battery powered device is not possible in this time...