Wio LTE Cat.1 | Seeed Studio Wiki

[giscus[bot]]

Wio LTE Cat.1 | Seeed Studio Wiki

Wio Tracker (Wireless Input Output) is an open source gateway which enable faster IoT GPS solutions. It is Arduino and Grove compatible development boards that helps you track nearly any moving thing on the planet and then upload that data wirelessly. The Wio LTE is the LTE version of Wio Tracker, so now we’ve got 2 versions of Wio Tracker and the LTE (4G) version will make some differences.

https://wiki.seeedstudio.com/Wio_LTE_Cat.1

[matsujirushi]

Hi,

Step 2. Follow How to Add Seeed boards to Arduino IDE to add Wio_LTE into arduino board manager.

Wio LTE board package not found.
Could you write the complete name of the board package on the wiki?

[MatthewJeffson]

Hi, the board of "Wio LTE Cat.1" is stored in "Seeed SAMD Boards" package like "Wio Terminal". I will update it soon.

[matsujirushi]

Really?
Wio LTE Cat.1 MCU is STM32 instead of SAMD.

[raymannnnnnnnnnn]

Hi. All pzem004Tv30 librarys are not compatible with this board. Can you give me a sketch example how to read the pzem004tv30 from the tx/rx uart port? Thanks

[MatthewJeffson]

Welcome to our product documentation platform! We value user feedback and contributions, so we couldn’t be more grateful that you can help us improving the documentation.

Hence, if you find obvious errors in the product documentation, or you have additional ideas and insights about using products, please contribute to us.

If you need technical support, you can email it to [email protected].

If you want to discuss the product, I recommend the Seeed Studio Forum and Seeed Studio Discord Channel

The "Discussion channel" in Github here is a relatively new addition and may not receive much attention.

Nonetheless, we hope you find it helpful with the help of others. We will clean it up on a monthly basis.