kötü yazılım.

[kemx19]

Cura Version

5.6.0

Operating System

windows 11

Printer

elegoo neptun 4 plus

Name abnormal settings

No response

Describe model location

No response

Describe your model

lamp

Add your .zip here ⬇️

slicer programınız çok kötü çalışıyor.
Yeni Sıkıştırılmış Klasör (2).zip

[GregValiant]

Thanks for the report.
You did not describe the problem you are having.
Cura 5.5 and 5.6 had problems slicing "organic" shaped models. Changes were made in Cura 5.7.0. I suggest you upgrade to Cura 5.9.0.
I'll mark this as a duplicate and close it. This was a well known problem and appears to have been fixed in later releases.

This is the "74" model sliced in 5.9.0.

This is an error report on the "74" model.
--> 0 Naked edges (?)
--> 0 Planar holes (?)
--> 0 Non-Planar holes (?)
--> 4 Non-Manifold edges (?)
--> 8 Inverted normals (?)
--> 0 Duplicate faces (?)
--> 0 Degenerate faces (?)
--> 0 Disjoint shells (?)
-> Repairing: 100.00%
-> Converting back
-> File repaired
Time needed for repair (ms): 10608
--> Vertex count changed from 21833 to 26871 (+5038)
--> Triangle count changed from 43746 to 54016 (+10270)

In regards to the "110" model, it's resolution is far beyond that is needed to FDM printing. Simplifying the model is advisable before attempting to slice it. It has over a million surfaces in it.

This is sliced with 5.9.0.