Component to integrate with Saleryd HRV Systems
Disclaimer
This integration has been developed for LOKE1 HRV system. Use at own risk. I am in no way affiliated with Saleryd. All trademarks belong to their respective owners.
Sensors
| Name | Description | Unit of measure |
|---|---|---|
heat_exchanger_rpm |
Speed of the heat exchanger rotor | rpm |
heat_exchanger_speed |
Speed of the heat exchanger rotor | percent |
supply_air_temperature |
Supply air temperature | Degrees celsius |
heater_air_temperature |
Air temperature at heater battry | Degrees celsius |
supply_fan_speed |
Speed of the supply air fan | percent |
extract_fan_speed |
Speed of the extract air fan | percent |
ventilation_mode |
Ventilation mode of the system (0=Home,1=Away,2=High) | integer |
fireplace_mode |
Fireplace mode state (0=Off,1=On) | integer |
temperature_mode |
Temperature mode (0=Cooling,1=Economy,2=Normal) | integer |
Services
| Name | Description | Fields |
|---|---|---|
set_fireplace_mode |
Set fireplace mode | value: integer (0=On, 1=off) |
set_cooling_mode |
Set cooling mode | value: integer (0=On, 1=off) |
set_ventilation_mode |
Set ventilation mode | value: integer (0=Home,1=Away,2=High) |
set_temperature_mode |
Set temperature mode | value: integer (0=Cooling,1=Economy,2=Normal) |
| Model | Software versions |
|---|---|
| Saleryd LOKE1 (LOKE BASIC) | Firmware 4.1.1 |
- Connect HRV to local network . See instructions in user manual
- Take note of the assigned IP adress of the HRV system
- In the HA UI go to "HACS" and add this repository
- In the HA UI go to "Configuration" -> "Integrations" click "+" and search for "Saleryd HRV".
- Click install
Configuration in congfiguration.yaml is not supported
| Setting | Description |
|---|---|
| IP | IP adress of the HRV system |