Building

Dependencies

Getting the source

Building

Testing

Building the standalone VM only

Dependencies

C++11

Dart uses some new C++ features from C++11 (previously called C++0x). Compilers that support these features are GCC version 4.8 (4.6 is known not to work) and Microsoft Visual Studio 2015 (available in a free community edition for many users). The clang compiler for linux, included in the Dart distribution, and the compilers used by Xcode on macOS (previously called OS X) are also known to work.

Linux

Install build tools:

sudo apt-get install g++-multilib git make python curl

Install Chromium's depot tools:

git clone https://chromium.googlesource.com/chromium/tools/depot_tools.git
export PATH="$PATH:$PWD/depot_tools"

Mac OS X

Install XCode.

Install Chromium's depot tools:

git clone https://chromium.googlesource.com/chromium/tools/depot_tools.git
export PATH="$PATH:$PWD/depot_tools"

Windows

Install VisualStudio.

Install Chromium's depot tools following this or this instructions.

Important: If you are not a Googler make sure to set DEPOT_TOOLS_WIN_TOOLCHAIN system variable to 0 otherwise depot tools will attempt to pull down a Google-internal toolchain instead of using a local installation of Visual Studio.

Getting the source

mkdir dart-sdk
cd dart-sdk
gclient config --unmanaged https://dart.googlesource.com/sdk.git
gclient sync

Building

Build the 64-bit SDK:

cd dart-sdk/sdk
./tools/build.py --mode release --arch x64 create_sdk

The output will be in out/ReleaseX64/dart_sdk on Linux and Windows, and xcodebuild/ReleaseX64/dart_sdk on MacOS.

Build the 32-bit SDK:

cd dart-sdk/sdk
./tools/build.py --mode release --arch ia32 create_sdk

The output will be in out/ReleaseIA32/dart_sdk on Linux and Windows, or xcodebuild/ReleaseIA32/dart_sdk on MacOS.

See also building for ARM.

Tips

By default the build and test scripts select the debug binaries. You can build and test the release version of the VM by specifying --mode=release or both debug and release by specifying --mode=all on the respective build.py and test.py command lines. This can be shortened to -mrelease or -m release, and the architecture can be specified with --arch=ia32 or -a x64, the default. Other architectures, like arm, arm64, and mips, are also supported.

We recommend that you use a local file system at least for the output of the builds. The output directory is out on linux, xcodebuild on Mac OS, and build on Windows. If your code is in some NFS partition, you can link the out directory to a local directory:

$ cd sdk/
$ mkdir -p /usr/local/dart-out/
$ ln -s -f /usr/local/dart-out/ out

Notification when build is done

The environment variable DART_BUILD_NOTIFICATION_DELAY controls if build.py displays a notification when the build is done. If a build takes longer than DART_BUILD_NOTIFICATION_DELAY a notification will be displayed.

A notification is a small transient non-modal window, for now, only supported on Mac and Linux.

Special note for Windows users using Visual Studio Community Edition:

Your Visual Studio executable command may have a different name from the standard Visual Studio installations. You can specify the name for that executable by passing the additional flag "--executable=$VS_EXECUTABLE_NAME" to build.py. The executable name will probably be something like "VSExpress.exe".

Building on Windows with Visual Studio 2015

Gyp should autodetect the version of Visual Studio you have, and produce solution files in the correct format. If this is not happening, then set environment variable gyp_msvs_version to 2015.

For example, this will produce Visual Studio 2015-compliant solution files:

set gyp_msvs_version=2015
gclient runhooks

Testing

All tests are executed using the test.py script under tools/. You may need to build everything once before testing, using build.py as described above. E.g.

$ ./tools/build.py --mode release --arch ia32

Now you can run all tests as follows (Safari, Firefox, Chrome, and IE must be installed, if you want to run the tests on them. Dartium, and drt (content_shell) are automatically downloaded by the test scripts.):

$ ./tools/test.py -mrelease --arch=ia32 --compiler=none,dart2js --runtime=vm,d8,drt,chrome,dartium,ff,[safari,ie]

Specify the compiler used (optional -- only necessary if you are compiling to JavaScript (required for most browsers), the default is "none") and a runtime (where the code will be run).

You can run a specific test by specifying its full name or a prefix. For instance, the following runs only tests from the core libraries:

$ ./tools/test.py -mrelease --arch=ia32 --runtime=vm corelib

The following runs a single test:

$ ./tools/test.py -mrelease --arch=ia32 --runtime=vm corelib/ListTest

Make sure to run tests using the release VM if you have built the release VM, and for the same architecture as you have built.

See also Testing Dart2js for dart2js specific examples.

Complex examples

Adjust the flags to your needs: appropriate values for --arch and --tasks will depend on your system. The below examples are taken from a 12 core x86_64 system.

Dart analyzer tests example:

./tools/test.py \
  --compiler dartanalyzer \
  --runtime none \
  --progress color \
  --arch x64 \
  --mode release \
  --report \
  --time \
  --tasks 6 \
  language

VM tests example:

./tools/test.py \
  --compiler none \
  --runtime vm \
  --progress color \
  --arch x64 \
  --mode release \
  --checked \
  --report \
  --time \
  --tasks 6 \
  language

Dart2JS example:

./tools/test.py \
  --compiler dart2js \
  --runtime chrome \
  --progress color \
  --arch x64 \
  --mode release \
  --checked \
  --report \
  --time \
  --tasks 6 \
  language

Troubleshooting and tips for browser tests

To debug a browser test failure, you must start a local http server to serve the test. This is made easy with a helper script in dart/tools/testing. The error report from test.py gives the command line to start the server in a message that reads:

To retest, run:  /usr/local/[...]/dart/tools/testing/bin/linux/dart /usr/local/[...]/dart/tools/testing/dart/http_server.dart ...

After starting the server, you can run the browser using the command line starting with Command[[browser name]]. The debugging tools in the browser can be used to set Javascript or Dart breakpoints, and the reload button should rerun the test. * Tip: In the Sources tab of Chrome's developer tools, a "stop sign" button in the upper right tells the browser to break when an exception is thrown.

Some common problems you might get when running tests for the first time:

• Some fonts are missing. Chromium tests use DumpRenderTree, which needs some sets of fonts. See LayoutTestsLinux for instructions in how to fix it.
• No display is set (e.g. running tests from an ssh terminal). DumpRenderTree is a nearly headless browser. Even though it doesn't open any GUI, it still must have an X session available. There are several ways to work around this:

  • Use xvfb:

    xvfb-run ./tools/test.py --arch=ia32 --compiler=dart2js --runtime=drt ...

  • Other options include using ssh X tunneling (ssh -Y), NX, VNC, setting up xhost and exporting the DISPLAY environment variable, or simply running tests locally.

Building the standalone VM only

You can tell the build script to build the runtime targets only with the command:

$ ./tools/build.py runtime