2013.11.3

ESP8266: Using full mac address as ID to prevent duplicate

2023.11.2

Expose room temperature and compressor frequency as HA sensor.
Tr to fix rarely MQTT disconnected after more than 5 days.

2023.11.1

Fix mqtt not reconnect.

2023.10.1

• Use async-mqtt-client and ESPAsyncWebServer no delay anymore.
• Support 9 languages at one, you can choose from Unit settings.
• Disable Prometheus exporter by default, enable it and build in config.h file.
• Remove min temp and max temp in Unit settings because it fixed by the device.
• Support NTP datetime.
• New Status page with information: date time, up time, free heap, build date, build version, ip address.
• Support custom pin for UART with ESP32
• Add WiFi scanner when setup.
• Real time update in control page with web event.
• Change the default ip for captivate portal to: 192.168.4.1
• Access the device by local host name HVAC-MACADDRESS.local and ip.
• Set access password with confirmation, prevent set wrong password.
• Breaking change: Add native ESP IDF build for ESP32 for advance user, you may need to re setup your device because it use difference partition. or you can build your own using Platformio, it will use old partition scheme.

V.0.6.3

Auto restart on WiFi drop

Version 0.5.0

Use less ram.
Firmware update over web.

Version 0.4.9

Release version 0.4.9:
Use less ram by 30%.
Option for devices not support heat mode, change in Setup-> Advance ->Mode Support
Support set login password
Update latest code from parent repos

Version 0.4.6

Release version 0.4.6:

• Auto reconnect MQTT server after 1 seconds if server fail for more responsive UI
• New status page about: MQTT, WIFI and HVAC
• Allow OTA when in AP mode
• Update latest https://github.com/SwiCago/HeatPump library

Note: mitsubishi2mqtt_046_d1_mini_full.bin for new flash and mitsubishi2mqtt_046_d1_mini_sketch_only.bin for update

Version 0.4.1b

Release version 0.4.1b