| ref | lang | navorder | navtitle |
|---|---|---|---|
partlist |
en |
7 |
Parts |
The required components for the assembly of the two boards are these:
| Count | Name | Value | Base | Extension |
|---|---|---|---|---|
| 1 | Base board | 1 | - | |
| 1 | Extension board | - | 1 | |
| 1 | R1 Resistor | 390 | 1 | - |
| 2 | R2+R14 Resistor | 220 | 2 | - |
| 1 | R3 Resistor | 100k | 1 | - |
| 1 | R4 Resistor | 22k | 1 | - |
| 1 | R5+R6 Resistor | 470 | 2 | - |
| 2 | R7 Resistor (+R2 on extension) | 18k | 1 | 1 |
| 1 | R8 Resistor | 15k | 1 | - |
| 1 | R9 Resistor | 220k | 1 | - |
| 1 | R11 Resistor | 820 | 1 | - |
| 1 | R12 Resistor | 10k | 1 | - |
| 1 | R13 Resistor (+R1 on extension) | 1.2k | 1 | 1 |
| 1 | R3 Resistor (only on extension) | 150k | - | 1 |
| a.n. | Witewound Resistor 1W for testing | 330 | a.n. | - |
| 4 | D1-4 Diode | 1N4007 | 4 | - |
| 1 | D6 Zener diode 1.3W | 9.1V | 1 | - |
| 2 | OK1-2 Optocoupler | CNY17-4 | 2 | - |
| 1 | IC1 Dual comparator DIP-8 | TLC393CP | 1 | - |
| 1 | IC2 Voltage regulator 5V 0.1A pos. | 78L05 | 1 | - |
| 1 | Q1 Transistor NPN | BC337-40 | 1 | - |
| 1 | DC-DC Convertor RNM0512S/RO0509S | 1 | - | |
| 1 | C1 Electrolytic capacitor | 10uF | 1 | - |
| 2 | C2 Ceramic capacitor (+C1 on ext.) | 100nF | 1 | 1 |
| 2 | C3+4 Ceramic capacitor | 2.2uF | 2 | - |
| 6 | LED1-3 Low current (yellow, red, green) | 2mA | 3 | 3 |
| 3 | LED spacers 3mm | 10mm | 3 | 3 |
| 1 | PCB terminal 2-fold 5.08 | 1 | - | |
| 0-1 | UART by choice (ELV, Mini, FTDI232) | 1 | - | |
| 1 | 2-pol. Socket header | 2-pol | - | - |
| 1 | 3-pol. Socket header | 3-pol | - | - |
| 2 | 4-pol. Socket header | 4-pol | - | 1 |
| 2 | 6-pol. Socket header | 6-pol | 1 | 1 |
| 1 | 13-pol. Socket header | 13-pol | - | 1 |
| 1 | 2-pol. Pin header | 2-pol | - | - |
| 1 | 3-pol. Pin header | 3-pol | - | - |
| 1 | 4-pol. Pin header | 4-pol | - | - |
| 1 | 5-pol. Pin header angled | 5-pol | - | - |
| 0-1 | Pin header straight/angled | 25-pol | - | 0-1 |
| 4 | Spacers+nuts | - | - | |
| 2 | Switch, h=4.3mm | 6x6mm | - | 2 |
| 0-1 | Reed contact | 2mm | - | 0-1 |
| 0-1 | NTC-0.2 10K | 10K | - | 0-1 |
| 1-2 | Wemos | D1 Mini | - | 1-2 |
| 0-1 | Dupont cable 5-pol | - | - | |
| 0-1 | USB power supply 1-2A | - | 0-1 |
Hints:
- For all Resistors, a metal film version 1/4 Watt should be used.
a.n.stands foras needed- The quantity for the combination of base board and extension board is reflected in the
Countcolumn. - In the
BaseorExtensioncolumns, the quantity for each board is reflected individually. - The capacitor values might be a bit different in the shopping carts (especially the 2.2uF). This is ok and due to lacking availability.