From 088d81ca87948366ed53722ec07f9e5cbf61b283 Mon Sep 17 00:00:00 2001
From: Sheepy3 <109123711+Sheepy3@users.noreply.github.com>
Date: Wed, 15 Nov 2023 11:56:48 -0500
Subject: [PATCH] Update ASSEMBLY.md

---
 docs/ASSEMBLY.md | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/docs/ASSEMBLY.md b/docs/ASSEMBLY.md
index 9ce72c01a..d0ca94c5d 100644
--- a/docs/ASSEMBLY.md
+++ b/docs/ASSEMBLY.md
@@ -217,4 +217,13 @@ Create another belt bearing assembly and ensure the belt is behind it.
 Here comes the hardest part: routing the belt. Ensure it goes around the shafts of both motors, and runs between the belt bearings within the carriage. 
 
 ---
+<img src="https://raw.githubusercontent.com/hackclub/blot/main/docs/AssemblyImages/final.png" alt="aaa" width="300"/><br>
 At the belt clip, bend the belt around on itself (with the teeth facing outwards) in order to hold it tight. 	
+
+---
+<img src="https://raw.githubusercontent.com/hackclub/blot/main/docs/AssemblyImages/Image0088.png" alt="aaa" width="300"/><img src="https://raw.githubusercontent.com/hackclub/blot/main/docs/AssemblyImages/Image0089.png" alt="aaa" width="300"/><br>
+Attach the pcb to its mount. Ensure all corners are clipped on.
+
+---
+<img src="https://raw.githubusercontent.com/hackclub/blot/main/docs/AssemblyImages/Image0090.png" alt="aaa" width="300"/><img src="https://raw.githubusercontent.com/hackclub/blot/main/docs/AssemblyImages/Image0091.png" alt="aaa" width="300"/><br>
+Finally, Screw the mount onto the lower rail using m5x10mm screws and t-nuts.