Raspberry PI

[svitale623]

can the hub and agent be installed on a RP 2?

[henrygd]

Yes, you should be able to use the linux arm binaries. And our install script should work as well.

The agent should consume less than 10MB RAM, but the hub may need 100 or more, so just be aware of that if you don't have much to spare.

Let me know if you have any trouble with it.

[svitale623]

Thanks, that seemed to work. another question, how would i access the web interface outside the Pi itself. i cant seem to access the web interface from within my network. i confirmed both services are active and running.

[henrygd]

You should be able to use the ip or hostname of the pi with the port at the end. Do you have other applications on your pi that you are able to access from within your network?

My best guess is that you may have a firewall blocking access. See the troubleshooting section of the readme.

Otherwise you can use SSH port forwarding / SSH tunneling, but that will require you to ssh into the pi first.

[svitale623]

Yes, currently running uptime kumA on the pi. I can access this service by hostname and IP

…

On Thu, Aug 8, 2024, 8:10 PM hank ***@***.***> wrote: You should be able to use the ip or hostname of the pi with the port at the end. Do you have other applications on your pi that you are able to access from within your network? My best guess is that you may have a firewall blocking access. See the troubleshooting section of the readme <https://github.com/henrygd/beszel?tab=readme-ov-file#faq--troubleshooting> . Otherwise you can use SSH port forwarding / SSH tunneling, but that will require you to ssh into the pi first. — Reply to this email directly, view it on GitHub <#104 (reply in thread)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AWY7HN34SBGGUHJHSPCSYZ3ZQQCFZAVCNFSM6AAAAABMGWOEVCVHI2DSMVQWIX3LMV43URDJONRXK43TNFXW4Q3PNVWWK3TUHMYTAMRYGA3TQNQ> . You are receiving this because you authored the thread.Message ID: ***@***.***>

[henrygd]

What port are you running uptime kuma on?

And what is in the logs for the hub?

If you used the install script, run systemctl status beszel on the pi.

[svitale623]

uptimekuma is using the default port, 3001. logs show ssh key pair generated successfully. when i run the above command outputs - unit beszel.service could not be found. if i run systemctl status beszel-hub.service, outputs running and active.

[henrygd]

I looked into this further and updated the install script for the hub to run on 0.0.0.0, which should provide access from outside.

I recommend downloading the hub install script again, running -u to uninstall, and installing fresh.

If you've already done some setup and don't want to start fresh, let me know and I'll give you the steps to update in place.

[svitale623]

great, thanks. it working. :)