Replies: 9 comments 24 replies
-
|
Thanks! 😃 Yes, I'm experimenting with it, but currently my time is VERY limited (newborn child 😄).. Your assumption is correct, but there are more values needed, especially in the 8FB area. I've tried setting Start stop to sport/eco/race and on/off. So far no luck there, but I need to do some more experimenting. Be sure to check out my comments inside the template as well. I've added a lot more there, not everything is documented in the wiki yet. |
Beta Was this translation helpful? Give feedback.
-
|
Congrats! Yes, I'd missed the 8FB area, I was starting to wonder how the profiles actually changed the behaviour as eco/normal/sport didn't seem very granular. Hopefully there is a valid 'off' value, I'd half expected at least one MQB car would have a profile which disabled start-stop as standard (race?) but I guess not. If outside warms up, I'll have a play this weekend. Tweaking the 'vRS mode' button to only light in sport looks super easy :) |
Beta Was this translation helpful? Give feedback.
-
|
@jilleb How did you manage that it's no longer setting start-stop back to ON when switching to an other profile? |
Beta Was this translation helpful? Give feedback.
-
|
For me, Status: driving profile selection for start-stop function-Act.val. is either:
Start-stop is always enabled when I start the car, if I disable it using the driving mode button:
I had a quick look through my dataset but I'm not sure what's causing the Act.val. to change between 0 and 5. Feel free to take a look, I'm not sure if it's an stock dataset as I was given it when I updated my gateway to SW:4344: original.zip |
Beta Was this translation helpful? Give feedback.
-
|
The values in the 8FB range change the actual value. |
Beta Was this translation helpful? Give feedback.
-
|
There doesn't there seem to be anything in 8FB-9EA that reacts to start-stop or sets 0 and 5: |
Beta Was this translation helpful? Give feedback.
-
|
Is start stop grouped within Drive? |
Beta Was this translation helpful? Give feedback.
-
|
Yup: So changing Drive will actually adjust the settings for all 4 of those? I'll take a closer look at 9EB-A2A section to start understanding. |
Beta Was this translation helpful? Give feedback.
-
|
Yes indeed. The drive group will be set to sport/eco/normal as a whole. |
Beta Was this translation helpful? Give feedback.
-
|
You can remove Start stop from group and add it individually to HMI. Then you can set it to On/Off, but still no success to disabled it from FPA yet |
Beta Was this translation helpful? Give feedback.
-
|
Basically we have to read the status out of Start Stop when disabling it from the button and then we need to send this signal from FPA with setting it to OFF right? |
Beta Was this translation helpful? Give feedback.
-
|
Found a VIN and grabbed the DS. Control-module request values (8FB range) |
Beta Was this translation helpful? Give feedback.
-
|
Excellent news, can you add the dataset please? |
Beta Was this translation helpful? Give feedback.
-
|
Can you share the Dataset? |
Beta Was this translation helpful? Give feedback.
-
Unluckily it is L :( |
Beta Was this translation helpful? Give feedback.
-
|
Here you find FPA DS: |
Beta Was this translation helpful? Give feedback.
-
|
VSSZZZ5FZJR020451 |
Beta Was this translation helpful? Give feedback.
-
|
@langers2k Any updates here? I tried a lot, but without success. |
Beta Was this translation helpful? Give feedback.
-
|
Not yet, I've not had much time over the last few weeks... Still on the to do list though! |
Beta Was this translation helpful? Give feedback.
-
|
Have you had some time for further research? |
Beta Was this translation helpful? Give feedback.
-
|
I never found anything useful :( |
Beta Was this translation helpful? Give feedback.
-
|
what about messing with dataset on address 0x0001380 (eass dataset)? i created small program in java to basically parse all ODIS xml in folder and create some sort of compare sheet in excel to better understand and see what are the differences between cars + datasets
|
Beta Was this translation helpful? Give feedback.
-
I've been wondering through my dataset to get a feel for how things work and noticed mention of start-stop on the wiki.
My end goal would be to have start-stop user configurable on/off for individual mode and off in sport mode without pressing the button every drive or using an additional 'memory' module.
If I understand correctly, in theory it's possible:
This might let the user change between the different eco/normal/sport modes assuming they exist and the appropriate FeC/SWaP codes are installed?
Obviously I'm not sure those modes are applicable or would make any difference to start-stop (0x02) but I'd be interested to know if this is something you've experimented with at all.
Great work though, certainly made for some interesting reading this afternoon. Thank you for sharing :)
Beta Was this translation helpful? Give feedback.
All reactions