Vaillant ecoTEC plus - AdapterV5 - Homeassistant

[gentleman1979]

Hello!
I have a Vaillant heating system and have successfully set up the Adapter-V5. I receive many values, for example:

bai SetMode = { "hcmode": {"value": "auto"}, "flowtempdesired": {"value": 90.0}, "hwctempdesired": {"value": 65.0}, "hwcflowtempdesired": {"value": null}, "disablehc": {"value": 0}, "disablehwctapping": {"value": 0}, "disablehwcload": {"value": 1}, "remoteControlHcPump": {"value": 0}, "releaseBackup": {"value": 0}, "releaseCooling": {"value": 0}} StatusCirPump = { "0": {"name": "", "value": "on"}} Status01 = { "0": {"name": "temp1", "value": 72.0}, "1": {"name": "temp1", "value": 70.5}, "2": {"name": "temp2", "value": null}, "3": {"name": "temp1", "value": 55.0}, "4": {"name": "temp1", "value": 61.5}, "5": {"name": "pumpstate", "value": "off"}} ReturnTempExternal = { "temp": {"value": -1.81}, "sensor": {"value": "cutoff"}} ReturnTempMax = { "temp": {"value": 87.25}} DateTime = { "dcfstate": {"value": "nosignal"}, "btime": {"value": "-:-:-"}, "bdate": {"value": "-.-.-"}, "temp2": {"value": null}} Status02 = { "0": {"name": "hwcmode", "value": "on"}, "1": {"name": "temp0", "value": 60}, "2": {"name": "temp1", "value": 75.0}, "3": {"name": "temp0", "value": 70}, "4": {"name": "temp1", "value": 65.0}} SHEMaxFlowTemp = { "temp": {"value": 80.56}} StorageExitTemp = { "temp": {"value": 116.06}, "sensor": {"value": "circuit"}} StorageLoadPumpHours = { "hoursum2": {"value": 26}} StorageloadPumpStarts = { "cntstarts2": {"value": 1321}} StorageTemp = { "temp": {"value": 61.56}, "sensor": {"value": "ok"}} StorageTempDesired = { "temp": {"value": 60.00}} StorageTempMax = { "temp": {"value": 70.25}} TempDiffBlock = { "temp0": {"value": 0}} TempDiffFailure = { "temp0": {"value": 0}} TempGradientFailure = { "temp0": {"value": 0}} Templimiter = { "0": {"name": "", "value": "off"}} TemplimiterWithNTC = { "0": {"name": "", "value": "yes"}} TempMaxDiffExtTFT = { "temp": {"value": 0.00}} ValveStarts = { "cntstarts2": {"value": 3304}} WaterpressureMeasureCounter = { "0": {"name": "", "value": 131}} WPPostrunTime = { "minutes0": {"value": 5}} CounterStartattempts1 = { "temp0": {"value": 1}} CounterStartattempts2 = { "temp0": {"value": 0}} CounterStartAttempts3 = { "temp0": {"value": 0}} CounterStartAttempts4 = { "temp0": {"value": 0}} DeactivationsTemplimiter = { "0": {"name": "", "value": 0}} DisplayMode = { "0": {"name": "", "value": 2}} ExtFlowTempDesiredMin = { "temp": {"value": 40.00}} FanHours = { "hoursum2": {"value": 1164}} FanStarts = { "cntstarts2": {"value": 0}} FlowTemp = { "temp": {"value": 79.00}, "sensor": {"value": "ok"}} FlowTempDesired = { "temp": {"value": 75.00}} FlowTempMax = { "temp": {"value": 87.62}} HcHours = { "hoursum2": {"value": 1089}} HcPumpMode = { "0": {"name": "", "value": 3}} HcPumpStarts = { "cntstarts2": {"value": 21532}} HcStarts = { "0": {"name": "", "value": 28400}} HcUnderHundredStarts = { "0": {"name": "", "value": 6}} HoursTillService = { "hoursum2": {"value": null}} HwcHours = { "hoursum2": {"value": 20}} HwcStarts = { "0": {"name": "", "value": 800}} HwcTemp = { "temp": {"value": 54.38}, "sensor": {"value": "ok"}} HwcTempMax = { "temp": {"value": 65.00}} HwcUnderHundredStarts = { "0": {"name": "", "value": 72}} maintenancedata_HwcTempMax = { "temp": {"value": 78.56}} ModulationTempDesired = { "0": {"name": "", "value": 16.0}} OutdoorstempSensor = { "temp": {"value": -60.44}, "sensor": {"value": "cutoff"}} OverflowCounter = { "yesno": {"value": "yes"}} PowerValue = { "0": {"name": "", "value": "10 04 53 14 64 18"}} PrAPSCounter = { "0": {"name": "", "value": 0}} PrEnergyCountHc1 = { "0": {"name": "", "value": 3948334}} PrEnergyCountHc2 = { "0": {"name": "", "value": 0}} PrEnergyCountHc3 = { "0": {"name": "", "value": 0}} PrEnergyCountHwc1 = { "0": {"name": "", "value": 51065}} PrEnergyCountHwc2 = { "0": {"name": "", "value": 0}} PrEnergyCountHwc3 = { "0": {"name": "", "value": 0}} PrEnergySumHc1 = { "0": {"name": "", "value": 514871332}} PrEnergySumHc2 = { "0": {"name": "", "value": 0}} PrEnergySumHc3 = { "0": {"name": "", "value": 0}} PrEnergySumHwc1 = { "0": {"name": "", "value": 16911012}} PrEnergySumHwc2 = { "0": {"name": "", "value": 0}} PrEnergySumHwc3 = { "0": {"name": "", "value": 0}} PrVortexFlowSensorValue = { "0": {"name": "", "value": 0}} PumpHours = { "hoursum2": {"value": 2497}} PumpPower = { "0": {"name": "", "value": 15}} PumpPowerDesired = { "0": {"name": "", "value": "auto"}} ReturnTemp = { "temp": {"value": 79.81}, "tempmirror": {"value": 64258}, "sensor": {"value": "ok"}} broadcast vdatetime = { "time": {"value": "21:25:57"}, "date": {"value": "20.02.2024"}} 350 ActualTempDesired = { "temp0": {"value": 0}} ComfTempEnabled = { "onoff": {"value": "on"}} ControlMode = { "0": {"name": "", "value": -82}} FillmodeStartTime = { "0": {"name": "", "value": 1}} FlowTempMin = { "temp": {"value": 0.00}} HwcTempDesired = { "temp": {"value": 0.00}} IsInSingleHwcLoadingMode = { "onoff": {"value": "off"}} OffsetDesTemp = { "temp": {"value": 16.06}} OperatingMode = { "mcmode": {"value": 227}} OperatingModeHwc = { "mcmode": {"value": "on"}} OperatingmodeStartTime = { "0": {"name": "", "value": 0}} OutsideTemp = { "temp": {"value": 33.44}, "sensor": {"value": 20}} PrevOperatingMode = { "mcmode": {"value": 32}} PumpPower = { "power": {"value": 1}} ResetYield = { "onoff": {"value": 7}} RestoreOpModeAfterHoliday = { "onoff": {"value": "on"}} resvdColl1Sensor = { "temp": {"value": 1590.19}, "sensor": {"value": 99}} resvdStorage1Sensor = { "temp": {"value": 21.38}, "sensor": {"value": "ok"}} RoomTempOffset = { "temp": {"value": 33.44}} RoomTempSwitchOn = { "0": {"name": "", "value": "modulating"}} StatusDcf = { "dcfstate": {"value": "ok"}} TeleSwOperatingMode = { "mcmode": {"value": "eco"}}

But can someone tell me how I switch the operating mode from 'auto' to 'frost protection' via Home Assistant?"

[Koky05]

At first you need to allow write values to be shown by edditing filter-direction=r|u|^w. It depend on way you run ebusd (compiled directly, docker container, HA Addon).

[gentleman1979]

Do you mean the read-only option? In Home Assistant, it is off.

[Koky05]

No in file mqtt-hassio.cfg which operate MQTT autodicovery options has default settings:
filter-direction=r|u and it is need to be changed to value filter-direction=r|u|^w.

Into field Custom Command Line option add --mqttvar=filter-direction=r|u|^w (variable injection method).

[gentleman1979]

I'm sorry, I still don't understand. Do I first need to fetch with
wget https://raw.githubusercontent.com/john30/ebusd/master/contrib/etc/ebusd/mqtt-hassio.cfg in the HA terminal? And then edit the file? Is it enough if I enter the lines filter-direction=r|u|^w und Custom Command Line option ----mqttvar=filter-direction=r|u|^w?

[nobbilie]

Hi,
lege dir einen Ordner in deinem Config-Pfad von Home Assistant an. Dort kopier dir die mqtt-hassio.cfg hinein.
Danach machst du das gleiche mit den Konfigurationsdateien in einem weiteren Ordner.

Das sieht dann so bei mir aus in den Konfigurationsoptionen des Addons:

Und den Befehl den Koky05 meint, kopierst du dort hinein:

Die Latenz die ich noch drin habe, braucht es für die Lüftungsanlage hinter einem VR32.
Ich bin zar auch noch blutiger Anfänger was den ebusd angeht, habe aber hier schon viel dazu gelernt.

[gentleman1979]

Vielen Dank für deine Hilfe! Jetzt habe ich das auch so übernommen. Kann ich

so lassen? Kannst du mir noch zeigen, wie ich die Heizung von "Frostschutz" auf "Automatik" umschalte?
lg

[nobbilie]

Leider nein, bin selbst da noch nicht so drin - bei mir funktioniert das alles auchnoch nicht so, wie ich es gern hätte.