Replies: 1 comment
-
even change the values to the old ones i had from the old ebus config file. But no values :-( |
Beta Was this translation helpful? Give feedback.
-
even change the values to the old ones i had from the old ebus config file. But no values :-( |
Beta Was this translation helpful? Give feedback.
-
Hello at all,
on my old raspy I have one of the first versions of ebusd running and want to move to a newer raspberry. Therefore I installed the latest version of ebus. I get some values but not so many as with the old ebus for example I'm missing: compessor starts, t5 and t6 temp. That is how it looks like at the moment:
ebusctl info
version: ebusd 23.3.23.3
update check: OK
device: /dev/ttyUSB0, serial
signal: acquired
symbol rate: 36
max symbol rate: 160
min arbitration micros: 0
max arbitration micros: 2
min symbol latency: 4
max symbol latency: 6
scan: finished
reconnects: 0
masters: 5
messages: 623
conditional: 213
poll: 3
update: 60
address 03: master #11
address 08: slave #11, scanned "MF=Vaillant;ID=EHP00;SW=0416;HW=7201", loaded "vaillant/08.ehp.csv"
address 10: master #2
address 15: slave #2, scanned "MF=Vaillant;ID=UIH00;SW=0374;HW=6901", loaded "vaillant/15.uih.csv"
address 23: slave, scanned "MF=Vaillant;ID=EHP00;SW=0416;HW=7201", loaded "vaillant/23.ehp.cc.csv"
address 25: slave, scanned "MF=Vaillant;ID=EHP00;SW=0416;HW=7201", loaded "vaillant/25.ehp.hwc.csv"
address 31: master #8, ebusd
address 36: slave #8, ebusd
address 3f: master #23
address 50: slave, scanned "MF=Vaillant;ID=EHP00;SW=0416;HW=7201", loaded "vaillant/50.ehp.mc.csv"
address 7f: master #24
and only a view values but still missing a lot:
ebusctl find -v -d
broadcast datetime = outsidetemp=7.125;time=13:24:04;date=28.02.2024
broadcast hwcStatus = onoff=off;VF1=21;onoff=off
broadcast outsidetemp = temp2=7.125
broadcast signoflife = (empty for 7ffe07ff00 / )
broadcast vdatetime = time=13:24:04;date=28.02.2024
cc Mode = temp0=30;hwcmode=auto;hwcmode=disabled;mctype7=circulation;=00;daynight=night
cc Status = temp0=0;onoff=off;temp=-;temp0=0
ehp ActualEnvironmentPower = power=0
ehp ActualEnvironmentPowerFine = =0
ehp ActualEnvironmentPowerPercentage = percent0=0
ehp HeatpumpType = =brinetowater
ehp HwcTemp = temp=42.94;sensor=ok
ehp SetMode = hcmode=off;flowtempdesired=0.0;hwctempdesired=0.0;hwcflowtempdesired=0;disablehc=0;disablehwctapping=0;disablehwcload=0;remoteControlHcPump=0;releaseBackup=1;releaseCooling=0
ehp SourcePumpStatus = =0
ehp SourceTempInput = temp=11.44;sensor=ok
ehp Status02 = hwcmode=disabled;temp0=0;temp1=100.0;temp0=0;temp1=100.0
ehp Status = temp=21.81;press=1.549;press=1.029;hcmode2=off;=00
ehp TimeOfNextPredictedPowerCut = time=-:-:-
hwc Mode = temp0=35;hwcmode=auto;hwcmode=disabled;mctype7=hwc;=00;daynight=day
hwc Status = temp0=0;onoff=off;temp=42.94;temp0=35
mc CfgHeatSinkType = mctype=mixer
mc DateTime = dcfstate=valid;btime=13:24:24;bdate=28.02.2024;temp2=7.125
mc Mode = tempdesired=22;mcmode=eco;floorpavingdryingday=0;floorpavingdryingtemp=0;teleswitchmode=disabled;mctype7=pool;daynight=night
mc Status = flowtempdesired=0;onoff=off;flowtemp=19.69;tempdesired=5
scan.08 = MF=Vaillant;ID=EHP00;SW=0416;HW=7201
scan.08 id = prefix=21;year=12;week=20;product=0010009073;supplier=0006;counter=005243;suffix=N3
scan.15 = MF=Vaillant;ID=UIH00;SW=0374;HW=6901
scan.15 id = prefix=21;year=12;week=11;product=0020101780;supplier=0907;counter=005291;suffix=N0
scan.23 = MF=Vaillant;ID=EHP00;SW=0416;HW=7201
scan.23 id = prefix=21;year=12;week=20;product=0010009073;supplier=0006;counter=005243;suffix=N3
scan.25 = MF=Vaillant;ID=EHP00;SW=0416;HW=7201
scan.25 id = prefix=21;year=12;week=20;product=0010009073;supplier=0006;counter=005243;suffix=N3
scan.50 = MF=Vaillant;ID=EHP00;SW=0416;HW=7201
scan.50 id = prefix=21;year=12;week=20;product=0010009073;supplier=0006;counter=005243;suffix=N3
uih YieldThisYear = energy=811;energy=443;energy=0;energy=0;energy=0;energy=0;energy=0;energy=0;energy=0;energy=0;energy=0;energy=0
do anyone have a suggestion?
Beta Was this translation helpful? Give feedback.
All reactions