Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

Sign up for GitHub

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Jump to bottom

Wrong PumpOpenStateSensor used when watering #9

Open
itchensen opened this issue Sep 10, 2024 · 1 comment
Open

Wrong PumpOpenStateSensor used when watering #9

itchensen opened this issue Sep 10, 2024 · 1 comment

Comments

@itchensen
Copy link

itchensen commented Sep 10, 2024 •
edited
Loading

I got my GrowCube up an running an sucessfully connected via your integration to HA. Using HA 2024.9.1 and integration version 1.0.2
When manually pressing the Water Plant x Button, I noticed, that the correct pump is activated, but the wrong PumpOpenStateSensor.

I pressed "Water Plant B" in HA, pump B is (physically) activated correctly, but "Pump A open" goes to on in HA. (OK, with a little delay, but that's OK for me and not the point)

image image image

What can I do? Is this an error in the integration?

Thanks in advance for any hints...
@jonnybergdahl
Copy link
Owner

jonnybergdahl commented Nov 4, 2024 •
edited
Loading

I have tested this and got the same result as you, but only after having pressed "Water plant A" first. Home Assistant is polling state at 30 seconds intervals, so state changes can be delayed and misleading.

I am investigating pushing changes to Home Assistant instead, and it is looking promising so far.

Btw; I have verified that the integration in fact does not suffer from mixing channels.

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Assignees
No one assigned
Labels
None yet
Projects
None yet
Milestone
No milestone
Development

No branches or pull requests
2 participants
@itchensen @jonnybergdahl