Skip to content

Latest commit

 

History

History
337 lines (299 loc) · 13.9 KB

hdd_mPCIe_log_analyze.md

File metadata and controls

337 lines (299 loc) · 13.9 KB

coldboot

  • mpcie1 from coldboot:

    [2016-10-22 16:04:16] /dff57000\ Start thread
[2016-10-22 16:04:16] |dff57000| AHCI/1: probing
[2016-10-22 16:04:16] |dff57000| AHCI/1: link up
[2016-10-22 16:04:16] |dff57000| AHCI/1: send cmd ...
[2016-10-22 16:04:48] |dff57000| WARNING - Timeout at ahci_command:154!
[2016-10-22 16:04:48] |dff57000| AHCI/1: send cmd ...
[2016-10-22 16:05:20] |dff57000| WARNING - Timeout at ahci_command:154!
[2016-10-22 16:05:20] |dff57000| phys_free dff5a400 (detail=0xdff5a3d0)
[2016-10-22 16:05:20] |dff57000| phys_free dff5a200 (detail=0xdff5a3a0)
[2016-10-22 16:05:20] |dff57000| phys_free dff5a100 (detail=0xdff5a370)
[2016-10-22 16:05:20] |dff57000| phys_free dff5ac50 (detail=0xdff5ac20)
[2016-10-22 16:05:20] \dff57000/ End thread
[2016-10-22 16:05:20] phys_free dff57000 (detail=0xdff5a340)

mpcie2 from coldboot:

phys_alloc zone=0xdff6df10 size=4096 align=1000 ret=dff57000 (detail=0xdff5a710)
/dff57000\ start thread
|dff57000| ahci_port_detect
|dff57000| ahci/1: probing
|dff57000| ahci/1: link up
|dff57000| ahci/1: send cmd ...
|dff57000| WARNING - Timeout at ahci_command:154!
|dff57000| AHCI/1: send cmd ...
|dff57000| WARNING - Timeout at ahci_command:154!
|dff57000| phys_free dff5a000 (detail=0xdff5a7a0)
|dff57000| phys_free dff5a600 (detail=0xdff5a770)
|dff57000| phys_free dff5a500 (detail=0xdff5a740)
|dff57000| phys_free dff5ac20 (detail=0xdff5a7d0)
\dff57000/ End thread
phys_free dff57000 (detail=0xdff5a710)

After coldboot, mPCIe1 and mPCIe2 behaviour is the same (AHCI Timeout). But in mPCIe2 case you can not fully load into OS: it reboots after: tsc unst

reboot

  • mPCIe1 after reboot:

    [2016-10-22 16:07:10] phys_alloc zone=0xdff6df10 size=4096 align=1000 ret=dff57000 (detail=0xdff5a340)
[2016-10-22 16:07:10] /dff57000\ Start thread
[2016-10-22 16:07:10] |dff57000| AHCI/1: probing
[2016-10-22 16:07:10] |dff57000| AHCI/1: link up
[2016-10-22 16:07:10] |dff57000| AHCI/1: send cmd ...
[2016-10-22 16:07:10] |dff57000| AHCI/1: ... intbits 0x40000001, status 0x51 ...
[2016-10-22 16:07:10] |dff57000| AHCI/1: ... finished, status 0x51, ERROR 0x4
[2016-10-22 16:07:10] |dff57000| AHCI/1: send cmd ...
[2016-10-22 16:07:11] |dff57000| AHCI/1: ... intbits 0x2, status 0x58 ...
[2016-10-22 16:07:11] |dff57000| AHCI/1: ... finished, status 0x58, OK
[2016-10-22 16:07:11] |dff57000| phys_alloc zone=0xdff6df10 size=80 align=10 ret=dff5ae60 (detail=0xdff5ae30)
[2016-10-22 16:07:11] |dff57000| Searching bootorder for: /pci@i0cf8/pci-bridge@2,5/*@0/drive@1/disk@0
[2016-10-22 16:07:11] |dff57000| AHCI/1: supported modes: udma 6, multi-dma 2, pio 4
[2016-10-22 16:07:11] |dff57000| AHCI/1: Set transfer mode to UDMA-6
[2016-10-22 16:07:11] |dff57000| AHCI/1: send cmd ...
[2016-10-22 16:07:11] |dff57000| AHCI/1: ... intbits 0x1, status 0x50 ...
[2016-10-22 16:07:11] |dff57000| AHCI/1: ... finished, status 0x50, OK
[2016-10-22 16:07:11] |dff57000| phys_alloc zone=0xdff6df18 size=68 align=10 ret=f0500 (detail=0xdff5add0)
[2016-10-22 16:07:11] |dff57000| phys_free dff5ac50 (detail=0xdff5ac20)
[2016-10-22 16:07:11] |dff57000| phys_free dff5a400 (detail=0xdff5a3d0)
[2016-10-22 16:07:11] |dff57000| phys_free dff5a200 (detail=0xdff5a3a0)
[2016-10-22 16:07:11] |dff57000| phys_free dff5a100 (detail=0xdff5a370)
[2016-10-22 16:07:11] |dff57000| phys_alloc zone=0xdff6df1c size=1024 align=400 ret=dffad000 (detail=0xdff61250)
[2016-10-22 16:07:11] |dff57000| phys_alloc zone=0xdff6df1c size=256 align=100 ret=dffad800 (detail=0xdff61220)
[2016-10-22 16:07:11] |dff57000| phys_alloc zone=0xdff6df1c size=256 align=100 ret=dffabf00 (detail=0xdff61140)
[2016-10-22 16:07:11] |dff57000| AHCI/1: registering: "AHCI/1: ST1000LM014-SSHD-8GB ATA-9 Hard-Disk (931 GiBytes)"
[2016-10-22 16:07:11] |dff57000| phys_alloc zone=0xdff6df10 size=24 align=10 ret=dff61200 (detail=0xdff61110)
[2016-10-22 16:07:11] |dff57000| Registering bootable: AHCI/1: ST1000LM014-SSHD-8GB ATA-9 Hard-Disk (931 GiBytes) (type:2 prio:103 data:f0500)
[2016-10-22 16:07:11] \dff57000/ End thread
[2016-10-22 16:07:11] phys_free dff57000 (detail=0xdff5a340)

  • mPCIe2 after reboot:

    phys_alloc zone=0xdff6df10 size=4096 align=1000 ret=dff57000 (detail=0xdff5a710)
/dff57000\ Start thread
|dff57000| ahci_port_detect
|dff57000| AHCI/1: probing
|dff57000| AHCI/1: link up
|dff57000| AHCI/1: send cmd ...
|dff57000| rfis 
|dff57000| AHCI/1: ... intbits 0x40000001, status 0x51 ...
|dff57000| AHCI/1: ... finished, status 0x51, ERROR 0x4
|dff57000| AHCI/1: send cmd ...
|dff57000| psfis 
|dff57000| AHCI/1: ... intbits 0xffffffff, status 0x58 ...
|dff57000| AHCI/1: ... finished, status 0x58, OK
|dff57000| phys_alloc zone=0xdff6df10 size=80 align=10 ret=dff5ae10 (detail=0xdff5ade0)
|dff57000| Searching bootorder for: /pci@i0cf8/pci-bridge@2,1/*@0/drive@1/disk@0
|dff57000| AHCI/1: supported modes: udma 6, multi-dma 2, pio 4
|dff57000| AHCI/1: Set transfer mode to UDMA-6
|dff57000| AHCI/1: send cmd ...
|dff57000| psfis 
|dff57000| AHCI/1: ... intbits 0xffffffff, status 0x58 ...
|dff57000| AHCI/1: ... finished, status 0x58, OK
|dff57000| ahci_command rc = 0 

// REBOOTS HERE

phys_alloc zone=0xdff6df10 size=4096 align=1000 ret=dff57000 (detail=0xdff5a710)
/dff57000\ Start thread
|dff57000| ahci_port_detect
|dff57000| AHCI/1: probing
|dff57000| AHCI/1: link up
|dff57000| AHCI/1: send cmd ...
|dff57000| rfis 
|dff57000| AHCI/1: ... intbits 0x40000001, status 0x51 ...
|dff57000| AHCI/1: ... finished, status 0x51, ERROR 0x4
|dff57000| AHCI/1: send cmd ...
|dff57000| psfis 
|dff57000| AHCI/1: ... intbits 0x2, status 0x58 ...
|dff57000| AHCI/1: ... finished, status 0x58, OK
|dff57000| phys_alloc zone=0xdff6df10 size=80 align=10 ret=dff5ae10 (detail=0xdff5ade0)
|dff57000| Searching bootorder for: /pci@i0cf8/pci-bridge@2,1/*@0/drive@1/disk@0
|dff57000| AHCI/1: supported modes: udma 6, multi-dma 2, pio 4
|dff57000| AHCI/1: Set transfer mode to UDMA-6
|dff57000| AHCI/1: send cmd ...
|dff57000| rfis 
|dff57000| AHCI/1: ... intbits 0x1, status 0x50 ...
|dff57000| AHCI/1: ... finished, status 0x50, OK
|dff57000| ahci_command rc = 0 

// REBOOTS HERE

phys_alloc zone=0xdff6df10 size=4096 align=1000 ret=dff57000 (detail=0xdff5a710)
/dff57000\ Start thread
|dff57000| ahci_port_detect
|dff57000| AHCI/1: probing
|dff57000| AHCI/1: link up
|dff57000| AHCI/1: send cmd ...
|dff57000| rfis 
|dff57000| AHCI/1: ... intbits 0x40000001, status 0x51 ...
|dff57000| AHCI/1: ... finished, status 0x51, ERROR 0x4
|dff57000| AHCI/1: send cmd ...
|dff57000| psfis 
|dff57000| AHCI/1: ... intbits 0x2, status 0x58 ...
|dff57000| AHCI/1: ... finished, status 0x58, OK
|dff57000| phys_alloc zone=0xdff6df10 size=80 align=10 ret=dff5ae10 (detail=0xdff5ade0)
|dff57000| Searching bootorder for: /pci@i0cf8/pci-bridge@2,1/*@0/drive@1/disk@0
|dff57000| AHCI/1: supported modes: udma 6, multi-dma 2, pio 4
|dff57000| AHCI/1: Set transfer mode to UDMA-6
|dff57000| AHCI/1: send cmd ...
|dff57000| rfis 
|dff57000| AHCI/1: ... intbits 0x1, status 0x50 ...
|dff57000| AHCI/1: ... finished, status 0x50, OK
|dff57000| ahci_command rc = 0 

 // REBOOTS HERE 

phys_alloc zone=0xdff6df10 size=4096 align=1000 ret=dff57000 (detail=0xdff5a710)
/dff57000\ Start thread
|dff57000| ahci_port_detect
|dff57000| AHCI/1: probing
|dff57000| AHCI/1: link up
|dff57000| AHCI/1: send cmd ...
|dff57000| rfis 
|dff57000| AHCI/1: ... intbits 0x40000001, status 0x51 ...
|dff57000| AHCI/1: ... finished, status 0x51, ERROR 0x4
|dff57000| AHCI/1: send cmd ...
|dff57000| psfis 
|dff57000| AHCI/1: ... intbits 0x2, status 0x58 ...
|dff57000| AHCI/1: ... finished, status 0x58, OK
|dff57000| phys_alloc zone=0xdff6df10 size=80 align=10 ret=dff5ae10 (detail=0xdff5ade0)
|dff57000| Searching bootorder for: /pci@i0cf8/pci-bridge@2,1/*@0/drive@1/disk@0
|dff57000| AHCI/1: supported modes: udma 6, multi-dma 2, pio 4
|dff57000| AHCI/1: Set transfer mode to UDMA-6
|dff57000| AHCI/1: send cmd ...
|dff57000| rfis 
|dff57000| AHCI/1: ... intbits 0x1, status 0x50 ...
|dff57000| AHCI/1: ... finished, status 0x50, OK
|dff57000| ahci_command rc = 0 

// REBOOTS HERE

phys_alloc zone=0xdff6df10 size=4096 align=1000 ret=dff57000 (detail=0xdff5a710)
/dff57000\ Start thread
|dff57000| ahci_port_detect
|dff57000| AHCI/1: probing
|dff57000| AHCI/1: link up
|dff57000| AHCI/1: send cmd ...
|dff57000| rfis 
|dff57000| AHCI/1: ... intbits 0x40000001, status 0x51 ...
|dff57000| AHCI/1: ... finished, status 0x51, ERROR 0x4
|dff57000| AHCI/1: send cmd ...
|dff57000| psfis 
|dff57000| AHCI/1: ... intbits 0x2, status 0x58 ...
|dff57000| AHCI/1: ... finished, status 0x58, OK
|dff57000| phys_alloc zone=0xdff6df10 size=80 align=10 ret=dff5ae10 (detail=0xdff5ade0)
|dff57000| Searching bootorder for: /pci@i0cf8/pci-bridge@2,1/*@0/drive@1/disk@0
|dff57000| AHCI/1: supported modes: udma 6, multi-dma 2, pio 4
|dff57000| AHCI/1: Set transfer mode to UDMA-6
|dff57000| AHCI/1: send cmd ...
|dff57000| rfis 
|dff57000| AHCI/1: ... intbits 0x1, status 0x50 ...
|dff57000| AHCI/1: ... finished, status 0x50, OK
|dff57000| ahci_command rc = 0 

// REBOOTS HERE

phys_alloc zone=0xdff6df10 size=4096 align=1000 ret=dff57000 (detail=0xdff5a710)
/dff57000\ Start thread
|dff57000| ahci_port_detect
|dff57000| AHCI/1: probing
|dff57000| AHCI/1: link up
|dff57000| AHCI/1: send cmd ...
|dff57000| rfis 
|dff57000| AHCI/1: ... intbits 0x40000001, status 0x51 ...
|dff57000| AHCI/1: ... finished, status 0x51, ERROR 0x4
|dff57000| AHCI/1: send cmd ...
|dff57000| psfis 
|dff57000| AHCI/1: ... intbits 0xffffffff, status 0x58 ...
|dff57000| AHCI/1: ... finished, status 0x58, OK
|dff57000| phys_alloc zone=0xdff6df10 size=80 align=10 ret=dff5ae10 (detail=0xdff5ade0)
|dff57000| Searching bootorder for: /pci@i0cf8/pci-bridge@2,1/*@0/drive@1/disk@0
|dff57000| AHCI/1: supported modes: udma 6, multi-dma 2, pio 4
|dff57000| AHCI/1: Set transfer mode to UDMA-6
|dff57000| AHCI/1: send cmd ...
|dff57000| psfis 
|dff57000| AHCI/1: ... intbits 0xffffffff, status 0x58 ...
|dff57000| AHCI/1: ... finished, status 0x58, OK
|dff57000| ahci_command rc = 0 

// REBOOTS HERE

phys_alloc zone=0xdff6df10 size=4096 align=1000 ret=dff57000 (detail=0xdff5a710)
/dff57000\ Start thread
|dff57000| ahci_port_detect
|dff57000| AHCI/1: probing
|dff57000| AHCI/1: link up
|dff57000| AHCI/1: send cmd ...
|dff57000| rfis 
|dff57000| AHCI/1: ... intbits 0x40000001, status 0x51 ...
|dff57000| AHCI/1: ... finished, status 0x51, ERROR 0x4
|dff57000| AHCI/1: send cmd ...
|dff57000| psfis 
|dff57000| AHCI/1: ... intbits 0x2, status 0x58 ...
|dff57000| AHCI/1: ... finished, status 0x58, OK
|dff57000| phys_alloc zone=0xdff6df10 size=80 align=10 ret=dff5ae10 (detail=0xdff5ade0)
|dff57000| Searching bootorder for: /pci@i0cf8/pci-bridge@2,1/*@0/drive@1/disk@0
|dff57000| AHCI/1: supported modes: udma 6, multi-dma 2, pio 4
|dff57000| AHCI/1: Set transfer mode to UDMA-6
|dff57000| AHCI/1: send cmd ...
|dff57000| rfis 
|dff57000| AHCI/1: ... intbits 0x1, status 0x50 ...
|dff57000| AHCI/1: ... finished, status 0x50, OK
|dff57000| ahci_command rc = 0 

// REBOOTS HERE

phys_alloc zone=0xdff6df10 size=4096 align=1000 ret=dff57000 (detail=0xdff5a710)
/dff57000\ Start thread
|dff57000| ahci_port_detect
|dff57000| AHCI/1: probing
|dff57000| AHCI/1: link up
|dff57000| AHCI/1: send cmd ...
|dff57000| rfis 
|dff57000| AHCI/1: ... intbits 0x40000001, status 0x51 ...
|dff57000| AHCI/1: ... finished, status 0x51, ERROR 0x4
|dff57000| AHCI/1: send cmd ...

    After reboot, in mPCIe1 slot HDD gets registered, while in mPCIe2 slot it does not - it reboots during AHCI thread.

    It is not fully consistent. intbits and status values varies beteen following reboots. rfis and psfis prints added to indicate FIS type: Register- Device to Host or PIO Setup - Device to Host. Reboot appears even if thread flow is identical to this from mPCIe1, where reboot does not occur.

    Source of reboot is not yet discovered. It prints rc=0 but probably does not reach to return 0 (function above, which is calling this one, does not print returned value). This else does not matter since it is not executing in this case.

    This is done in file seabios/src/hw/ahci.c, function ahci_port_setup that starts with line 421.

            rc = ahci_command(port, 1, 0, 0, 0);

        dprintf(1, "ahci_command rc = %x \n", rc);

        if (rc < 0) {
            dprintf(1, "AHCI/%d: Set transfer mode failed.\n", port->pnr);
        }
    }
else
{
    // found cdrom (atapi)
    port->drive.type = DTYPE_AHCI_ATAPI;
    port->drive.blksize = CDROM_SECTOR_SIZE;
    port->drive.sectors = (u64)-1;
    u8 iscd = ((buffer[0] >> 8) & 0x1f) == 0x05;
    if (!iscd) {
        dprintf(1, "AHCI/%d: atapi device isn't a cdrom\n", port->pnr);
        return -1;
    }
    port->desc = znprintf(MAXDESCSIZE
                          , "DVD/CD [AHCI/%d: %s ATAPI-%d DVD/CD]"
                          , port->pnr
                          , ata_extract_model(model, MAXMODEL, buffer)
                          , ata_extract_version(buffer));
    port->prio = bootprio_find_ata_device(ctrl->pci_tmp, pnr, 0);
}
return 0;

    Function ahci_port_detect, which is calling function ahci_port_setup presented above. Below prints are not present in logs

    static void
ahci_port_detect(void *data)
{
   struct ahci_port_s *port = data;
   int rc;

   dprintf(2, "AHCI/%d: probing\n", port->pnr);
   ahci_port_reset(port->ctrl, port->pnr);
   rc = ahci_port_setup(port);

   dprintf(1, "ahci_port_setup rc = %d \n", rc);