getting.src

% Information about getting the source files.
% This is in a separate file because it is included in both the
% main book and the installation guide

You can get all the source code for this book,
by network file transfer (FTP) from the
several sites.  In each case, you need only get the file
$$
@pjlester-@n@.@m@.tar.Z@
$$
where $n@.@m$ is the current version number of the book. There is always
only one such file, but the $n@.@m$ may vary as we correct errors and
otherwise improve the material.  Once you have got the file, run the command
$$
@zcat pjlester-@n@.@m@.tar.Z | tar xf -@
$$
and then read or print the @README@ file, and the DVI file @installation.dvi@.
If you don't have @zcat@, do the following instead:
$$
\begin{array}{l}
@uncompress pjlester-@n@.@m@.tar.Z@ \\
@tar xf pjlester-@n@.@m@.tar@
\end{array}
$$

The sites where the sources are held are as follows.
\begin{center}
\begin{tabular}{|llll|}
\hline
Site	& Host name		  & Host address & Directory \\
\hline
Glasgow & @ftp.dcs.glasgow.ac.uk@ & 130.209.240.50 & @pub/pj-lester-book@\\
Yale 	& @nebula.cs.yale.edu@    & 128.36.13.1 & @pub/pj-lester-book@	\\
Chalmers& @animal.cs.chalmers.se@ & 129.16.2.27	& @pub/pj-lester-book@ \\
\hline
\end{tabular}
\end{center}
Log in as @anonymous@, and use your electronic mail address
as password.
Here is a sample Internet FTP session:
\begin{verbatim}
    % ftp nebula.cs.yale.edu
    Connected to NEBULA.SYSTEMSZ.CS.YALE.EDU.
    220 nebula FTP server (SunOS 4.0) ready.
    Name (nebula.cs.yale.edu:guestftp): anonymous
    331 Guest login ok, send ident as password.
    Password: simonpj@dcs.glasgow.ac.uk
    230 Guest login ok, access restrictions apply.
    ftp> type binary
    200 Type set to I.
    ftp> cd pub/pj-lester-book
    250 CWD command successful.
    ftp> get pjlester-1.2.tar.Z
    <messages about a successful transfer would come here>
    ftp> bye
\end{verbatim}
Within the UK, you may get the above file from
@uk.ac.glasgow.dcs@ by anonymous UK NIFTP 
(binary mode; user: @guest@; password: your e-mail address);
request:
$$
@<FP>/pj-lester-book/@filename
$$
A typical command you might use on at least some Unix machines is:
\begin{verbatim}
  cpf -b '<FP>/pj-lester-book/pjlester-1.2.tar.Z@uk.ac.glasgow.dcs' 
	 pjlester-1.2.tar.Z
\end{verbatim}