afe test

[JmanNZ]

Hi.
What should the response be when using the afe test.
I have a flashing LED when using the afe test.

Thank you

[JmanNZ]

I see its sending the below from the usb com port.
Is the below normal ?

RED GREEN BLUE
3.300000 3.300000 3.300000
3.300000 3.300000 3.300000
3.300000 3.300000 3.300000
3.300000 3.300000 3.300000
3.300000 3.300000 3.300000
3.300000 3.300000 3.300000
3.300000 3.300000 3.300000
3.300000 3.300000 3.300000
3.300000 3.300000 3.300000
3.300000 3.300000 3.300000
3.300000 3.300000 3.300000
3.300000 3.300000 3.300000
3.300000 3.300000 3.300000
3.300000 3.300000 3.300000
3.300000 3.300000 3.300000
3.300000 3.300000 3.300000
3.300000 3.300000 3.300000
3.300000 3.300000 3.300000
3.300000 3.300000 3.300000
3.300000 3.300000 3.300000
3.300000 3.300000 3.300000
3.300000 3.300000 3.300000
3.300000 3.300000 3.300000
3.300000 3.300000 3.300000
3.300000 3.300000 3.300000
3.300000 3.300000 3.300000
3.300000 3.300000 3.300000
3.300000 3.300000 3.300000
3.300000 3.300000 3.300000
3.300000 3.300000 3.300000
3.300000 3.300000 3.300000
3.300000 3.300000 3.300000

RED GREEN BLUE
0.319355 0.576190 0.638710
0.000000 0.052381 0.000000
0.000000 0.000000 0.000000
0.000000 0.000000 0.000000
0.000000 0.000000 0.000000
0.000000 0.000000 0.000000
0.000000 0.000000 0.000000
0.000000 0.000000 0.000000
0.000000 0.000000 0.000000
0.000000 1.047619 0.958065
0.000000 0.995238 0.851613
0.000000 0.000000 0.000000
0.000000 0.000000 0.000000
0.000000 0.000000 0.000000
0.000000 0.000000 0.000000
0.000000 0.000000 0.000000
0.000000 0.000000 0.000000
0.000000 0.000000 0.000000
0.000000 0.000000 0.000000
0.000000 0.000000 0.000000
0.000000 0.000000 0.000000
0.000000 0.000000 0.000000
0.000000 0.000000 0.000000
0.000000 0.000000 0.000000
0.000000 0.000000 0.000000
0.000000 0.000000 0.000000
0.000000 0.000000 0.000000
0.000000 0.000000 0.000000
0.000000 0.000000 0.000000
0.000000 0.000000 0.000000
0.000000 0.000000 0.000000

Thanks

[mlorenzati]

Afe test is a simple validation placing each line with a constant value from 0 to 1volt constant to see what is being reported.
YOu can directly place integrationTest binary to test all
if there are issues with afe either shows in the status dialog afe error (AFE chip issue) or works with visible artifacts (AFE works but is dirty or with circuit issues)