Ender 3 S1 "Plus" version

[TheShaddii]

So there is a new Ender 3 S1 Plus... As far as the electronics are concerned, I believe this is identical to the S1 except that the build volume is 300x300x300...I would be happy to open up my machine and check any details. I would really really like a copy of this firmware for the S1 Plus... After using this firmware I am completely disenchanted with the stock firmware from Creality. I believe the professional firmware is superior in every way and desperately wish to have the experience on my S1 Plus.

I will admit I have never compiled firmware before and I do not know what is involved in making this adjustment but I am hoping it is something that can be easily accommodated.

[mriscoc]

You don't need to compile the firmware to change the printing volume, go to the Advanced/Physical settings menu and change there: x max position, y max position, z max position, x bed size and y bed size.

[TheShaddii]

Actually, I just noticed the Plus Has a touch screen and the regular s1 uses the Knob... is that going to be an issue? I feel like it would be an issue but I don't know enough to know better... Thanks again for your help.

[mriscoc]

That's bad, The Professional firmware is NOT compatible with that touch screen.

[TheShaddii]

That makes me sad... The default firmware is just terrible...i am going to see how much is gonnna cost to by a knob screen...

[egonwinter]

I have the Ender 3 S1 Pro, I buy the Display from the Ender 3/V2 with the Knop and install that brilliant firmware and it work 100 % the only issue what I have, the Hotend reaches only 260 C° butt I think there will come soon any update for it.

[mriscoc]

You can use the custom G-code 'C104 U1 T300' to unlock the maximum temperature (300 - 15 overshoot) of the hotend

[egonwinter]

Hi Miguel thanks for your help, I did like you wrote, now I can set it up to 285 C°, 300C° is not working but for the moment it is ok for me, I like that firmware so much, good Job 👍 Best regards Egon Egon Winter Wilhelm-Schweizer-Straße 10 56564 Neuwied Mail: ***@***.*** TEL. +49 2631 4009160 TEL. +49 170 6868491 TEL. +49 1520 1506356 Fax. +49 2631 9013170

…

Am 24.07.2022 um 18:20 schrieb Miguel Risco-Castillo ***@***.***>:  You can use the custom G-code 'C104 U1 T300' to unlock the maximum temperature of the hotend — Reply to this email directly, view it on GitHub, or unsubscribe. You are receiving this because you commented.

[egonwinter]

Hi Miguel I found it out, when I do the G Code C104 U1 T315 it goes to 300 C°, thanks again 👍👌 Best regards Egon Egon Winter Wilhelm-Schweizer-Straße 10 56564 Neuwied Mail: ***@***.*** TEL. +49 2631 4009160 TEL. +49 170 6868491 TEL. +49 1520 1506356 Fax. +49 2631 9013170

…

Am 25.07.2022 um 01:53 schrieb Egon Winter ***@***.***>: Hi Miguel thanks for your help, I did like you wrote, now I can set it up to 285 C°, 300C° is not working but for the moment it is ok for me, I like that firmware so much, good Job 👍 Best regards Egon Egon Winter Wilhelm-Schweizer-Straße 10 56564 Neuwied Mail: ***@***.*** TEL. +49 2631 4009160 TEL. +49 170 6868491 TEL. +49 1520 1506356 Fax. +49 2631 9013170 >> Am 24.07.2022 um 18:20 schrieb Miguel Risco-Castillo ***@***.***>: >> >  > You can use the custom G-code 'C104 U1 T300' to unlock the maximum temperature of the hotend > > — > Reply to this email directly, view it on GitHub, or unsubscribe. > You are receiving this because you commented.