Huawei E3372 with different PID, what to do about it? #119
Comments
|
I don't think this is going to be pretty. The only options I can think about right now are trying |
|
Digging a little further, the works with it, and it brings up |
|
same problem here with other modem but same family (Huawei E3272): the pid is logs: Interactive Elixir (1.13.1) - press Ctrl+C to exit (type h() ENTER for help)
████▄▄ ▐███
█▌ ▀▀██▄▄ ▐█
█▌ ▄▄ ▀▀ ▐█ N E R V E S
█▌ ▀▀██▄▄ ▐█
███▌ ▀▀████
fw 0.1.0 (7d14c72f-cf62-5dd6-ed17-1e7b1c5e279b) arm rpi3
Uptime : 18 seconds
Clock : 2022-01-20 19:15:20 -03
Firmware : Valid (B) Applications : 49 started
Memory usage : 61 MB (7%) Part usage : 0 MB (0%)
Hostname : nerves-1bf6 Load average : 0.13 0.03 0.01
wlan0 : 192.168.15.15/24, fe80::ba27:ebff:feac:4ea3/64
Nerves CLI help: https://hexdocs.pm/nerves/using-the-cli.html
Toolshed imported. Run h(Toolshed) for more info.
iex(1)> RingLogger.next
00:00:07.807 [info] Booting Linux on physical CPU 0x0
00:00:07.807 [info] Linux version 5.10.63 (buildroot@buildroot) (armv7-nerves-linux-gnueabihf-gcc (crosstool-NG 1.24.0.299_6729a76) 10.2.0, GNU ld (crosstool-NG 1.24.0.299_6729a76) 2.36.1) #1 SMP PREEMPT Sat Nov 27 12:18:01 -03 2021
00:00:07.808 [info] CPU: ARMv7 Processor [410fd034] revision 4 (ARMv7), cr=10c5383d
00:00:07.808 [info] CPU: div instructions available: patching division code
00:00:07.808 [info] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
00:00:07.808 [info] OF: fdt: Machine model: Raspberry Pi 3 Model B Plus Rev 1.3
00:00:07.809 [info] Memory policy: Data cache writealloc
00:00:07.809 [info] Reserved memory: created CMA memory pool at 0x30000000, size 64 MiB
00:00:07.809 [info] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
00:00:07.809 [info] Zone ranges:
00:00:07.811 [info] DMA [mem 0x0000000000000000-0x0000000033ffffff]
00:00:07.811 [info] Normal empty
00:00:07.812 [info] Movable zone start for each node
00:00:07.812 [info] Early memory node ranges
00:00:07.812 [info] node 0: [mem 0x0000000000000000-0x0000000033ffffff]
00:00:07.812 [info] Initmem setup node 0 [mem 0x0000000000000000-0x0000000033ffffff]
00:00:07.813 [debug] On node 0 totalpages: 212992
00:00:07.813 [debug] DMA zone: 1872 pages used for memmap
00:00:07.813 [debug] DMA zone: 0 pages reserved
00:00:07.813 [debug] DMA zone: 212992 pages, LIFO batch:63
00:00:07.813 [info] percpu: Embedded 15 pages/cpu s30348 r8192 d22900 u61440
00:00:07.813 [debug] pcpu-alloc: s30348 r8192 d22900 u61440 alloc=15*4096
00:00:07.814 [debug] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
00:00:07.814 [info] Built 1 zonelists, mobility grouping on. Total pages: 211120
00:00:07.814 [info] Kernel command line: coherent_pool=1M 8250.nr_uarts=1 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 bcm2708_fb.fbwidth=1824 bcm2708_fb.fbheight=984 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=tty1 fbcon=scrollback:1024k root=/dev/mmcblk0p2 rootwait consoleblank=0 quiet
00:00:07.815 [warn] Ignoring scrollback size option
00:00:07.815 [info] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear)
00:00:07.815 [info] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
00:00:07.815 [info] mem auto-init: stack:off, heap alloc:off, heap free:off
00:00:07.815 [info] Memory: 766440K/851968K available (6144K kernel code, 600K rwdata, 1128K rodata, 1024K init, 371K bss, 19992K reserved, 65536K cma-reserved)
00:00:07.816 [info] random: get_random_u32 called from cache_random_seq_create+0x88/0x15c with crng_init=0
00:00:07.816 [info] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
00:00:07.816 [info] rcu: Preemptible hierarchical RCU implementation.
00:00:07.816 [info] rcu: \x09RCU event tracing is enabled.
00:00:07.816 [info] \x09Trampoline variant of Tasks RCU enabled.
00:00:07.816 [info] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
00:00:07.817 [info] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
00:00:07.817 [info] arch_timer: cp15 timer(s) running at 19.20MHz (phys).
00:00:07.817 [info] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
00:00:07.818 [info] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
00:00:07.818 [info] Switching to timer-based delay loop, resolution 52ns
00:00:07.818 [info] Console: colour dummy device 80x30
00:00:07.818 [info] printk: console [tty1] enabled
00:00:07.818 [info] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
00:00:07.819 [info] pid_max: default: 32768 minimum: 301
00:00:07.819 [info] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
00:00:07.819 [info] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
00:00:07.819 [info] cgroup: Disabling memory control group subsystem
00:00:07.819 [info] CPU: Testing write buffer coherency: ok
00:00:07.821 [info] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
00:00:07.821 [info] Setting up static identity map for 0x100000 - 0x10003c
00:00:07.822 [info] rcu: Hierarchical SRCU implementation.
00:00:07.822 [info] smp: Bringing up secondary CPUs ...
00:00:07.822 [info] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
00:00:07.822 [info] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
00:00:07.822 [info] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
00:00:07.823 [info] smp: Brought up 1 node, 4 CPUs
00:00:07.823 [info] SMP: Total of 4 processors activated (153.60 BogoMIPS).
00:00:07.823 [info] CPU: All CPU(s) started in HYP mode.
00:00:07.823 [info] CPU: Virtualization extensions available.
00:00:07.823 [info] devtmpfs: initialized
00:00:07.823 [info] VFP support v0.3: implementor 41 architecture 3 part 40 variant 3 rev 4
00:00:07.824 [info] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
00:00:07.824 [info] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
00:00:07.824 [info] pinctrl core: initialized pinctrl subsystem
00:00:07.825 [info] NET: Registered protocol family 16
00:00:07.825 [info] DMA: preallocated 1024 KiB pool for atomic coherent allocations
00:00:07.825 [info] thermal_sys: Registered thermal governor 'step_wise'
00:00:07.825 [info] Serial: AMBA PL011 UART driver
00:00:07.825 [info] printk: console [ramoops-1] enabled
00:00:07.826 [info] pstore: Registered ramoops as persistent store backend
00:00:07.826 [info] ramoops: using 0x100000@0xb000000, ecc: 16
00:00:07.826 [info] bcm2835-mbox 3f00b880.mailbox: mailbox enabled
00:00:07.826 [info] raspberrypi-firmware soc:firmware: Attached to firmware from 2021-09-30T19:23:18, variant start_x
00:00:07.827 [info] raspberrypi-firmware soc:firmware: Firmware hash is 51215b4f6e3966401ecd99652a35cf1c25069113
00:00:07.827 [info] bcm2835-dma 3f007000.dma: DMA legacy API manager, dmachans=0x1
00:00:07.827 [info] SCSI subsystem initialized
00:00:07.828 [info] usbcore: registered new interface driver usbfs
00:00:07.828 [info] usbcore: registered new interface driver hub
00:00:07.828 [info] usbcore: registered new device driver usb
00:00:07.828 [info] clocksource: Switched to clocksource arch_sys_counter
00:00:07.828 [info] NET: Registered protocol family 2
00:00:07.828 [info] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear)
00:00:07.829 [info] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
00:00:07.829 [info] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear)
00:00:07.829 [info] TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear)
00:00:07.829 [info] TCP: Hash tables configured (established 8192 bind 8192)
00:00:07.829 [info] UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
00:00:07.830 [info] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
00:00:07.830 [info] NET: Registered protocol family 1
00:00:07.831 [info] Initialise system trusted keyrings
00:00:07.831 [info] workingset: timestamp_bits=14 max_order=18 bucket_order=4
00:00:07.831 [info] squashfs: version 4.0 (2009/01/31) Phillip Lougher
00:00:07.831 [info] Key type asymmetric registered
00:00:07.832 [info] Asymmetric key parser 'x509' registered
00:00:07.832 [info] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
00:00:07.832 [info] bcm2708_fb soc:fb: FB found 1 display(s)
00:00:07.832 [info] Console: switching to colour frame buffer device 228x61
00:00:07.832 [info] bcm2708_fb soc:fb: Registered framebuffer for display 0, size 1824x984
00:00:07.833 [info] Serial: 8250/16550 driver, 1 ports, IRQ sharing enabled
00:00:07.833 [info] bcm2835-rng 3f104000.rng: hwrng registered
00:00:07.833 [info] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB)
00:00:07.834 [info] gpiomem-bcm2835 3f200000.gpiomem: Initialised: Registers at 0x3f200000
00:00:07.834 [info] brd: module loaded
00:00:07.834 [info] loop: module loaded
00:00:07.835 [info] Loading iSCSI transport class v2.0-870.
00:00:07.835 [info] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
00:00:07.835 [warn] Core Release: 2.80a
00:00:07.835 [warn] Setting default values for core params
00:00:07.835 [warn] Finished setting default values for core params
00:00:07.835 [warn] Using Buffer DMA mode
00:00:07.836 [warn] Periodic Transfer Interrupt Enhancement - disabled
00:00:07.836 [warn] Multiprocessor Interrupt Enhancement - disabled
00:00:07.836 [warn] OTG VER PARAM: 0, OTG VER FLAG: 0
00:00:07.836 [warn] Dedicated Tx FIFOs mode
00:00:07.837 [warn]
00:00:07.837 [warn] WARN::dwc_otg_hcd_init:1072: FIQ DMA bounce buffers: virt = b0114000 dma = 0xf0114000 len=9024
00:00:07.837 [warn] FIQ FSM acceleration enabled for :\x0aNon-periodic Split Transactions\x0aPeriodic Split Transactions\x0aHigh-Speed Isochronous Endpoints\x0aInterrupt/Control Split Transaction hack enabled
00:00:07.838 [debug] dwc_otg: Microframe scheduler enabled
00:00:07.838 [warn]
00:00:07.838 [warn] WARN::hcd_init_fiq:457: FIQ on core 1
00:00:07.838 [warn]
00:00:07.838 [warn] WARN::hcd_init_fiq:458: FIQ ASM at 804e3b5c length 36
00:00:07.838 [warn]
00:00:07.839 [warn] WARN::hcd_init_fiq:496: MPHI regs_base at b4810000
00:00:07.839 [info] dwc_otg 3f980000.usb: DWC OTG Controller
00:00:07.839 [info] dwc_otg 3f980000.usb: new USB bus registered, assigned bus number 1
00:00:07.839 [info] dwc_otg 3f980000.usb: irq 89, io mem 0x00000000
00:00:07.840 [warn] Init: Port Power? op_state=1
00:00:07.840 [warn] Init: Power Port (0)
00:00:07.840 [info] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
00:00:07.840 [info] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
00:00:07.841 [info] usb usb1: Product: DWC OTG Controller
00:00:07.841 [info] usb usb1: Manufacturer: Linux 5.10.63 dwc_otg_hcd
00:00:07.841 [info] usb usb1: SerialNumber: 3f980000.usb
00:00:07.841 [info] hub 1-0:1.0: USB hub found
00:00:07.841 [info] hub 1-0:1.0: 1 port detected
00:00:07.842 [debug] dwc_otg: FIQ enabled
00:00:07.842 [debug] dwc_otg: NAK holdoff enabled
00:00:07.842 [debug] dwc_otg: FIQ split-transaction FSM enabled
00:00:07.843 [debug] Module dwc_common_port init
00:00:07.843 [info] usbcore: registered new interface driver cdc_acm
00:00:07.843 [info] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
00:00:07.843 [info] usbcore: registered new interface driver usb-storage
00:00:07.843 [info] usbcore: registered new interface driver usbserial_generic
00:00:07.844 [info] usbserial: USB Serial support registered for generic
00:00:07.844 [info] usbcore: registered new interface driver ch341
00:00:07.844 [info] usbserial: USB Serial support registered for ch341-uart
00:00:07.844 [info] usbcore: registered new interface driver cp210x
00:00:07.844 [info] usbserial: USB Serial support registered for cp210x
00:00:07.845 [info] usbcore: registered new interface driver ftdi_sio
00:00:07.845 [info] usbserial: USB Serial support registered for FTDI USB Serial Device
00:00:07.845 [info] i2c /dev entries driver
00:00:07.845 [info] Driver for 1-wire Dallas network protocol.
00:00:07.845 [info] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer
00:00:07.846 [info] sdhci: Secure Digital Host Controller Interface driver
00:00:07.846 [info] sdhci: Copyright(c) Pierre Ossman
00:00:07.846 [info] mmc-bcm2835 3f300000.mmcnr: could not get clk, deferring probe
00:00:07.846 [info] sdhost-bcm2835 3f202000.mmc: could not get clk, deferring probe
00:00:07.846 [info] sdhci-pltfm: SDHCI platform and OF driver helper
00:00:07.847 [info] ledtrig-cpu: registered to indicate activity on CPUs
00:00:07.847 [info] hid: raw HID events driver (C) Jiri Kosina
00:00:07.847 [info] usbcore: registered new interface driver usbhid
00:00:07.847 [info] usbhid: USB HID core driver
00:00:07.848 [info] NET: Registered protocol family 10
00:00:07.848 [info] Segment Routing with IPv6
00:00:07.849 [info] NET: Registered protocol family 17
00:00:07.849 [info] Registering SWP/SWPB emulation handler
00:00:07.849 [info] Loading compiled-in X.509 certificates
00:00:07.849 [info] pstore: Using crash dump compression: deflate
00:00:07.850 [info] uart-pl011 3f201000.serial: there is not valid maps for state default
00:00:07.850 [info] uart-pl011 3f201000.serial: cts_event_workaround enabled
00:00:07.850 [info] 3f201000.serial: ttyAMA0 at MMIO 0x3f201000 (irq = 114, base_baud = 0) is a PL011 rev2
00:00:07.850 [info] 3f215040.serial: ttyS0 at MMIO 0x3f215040 (irq = 86, base_baud = 31250000) is a 16550
00:00:07.851 [info] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver
00:00:07.851 [info] mmc-bcm2835 3f300000.mmcnr: mmc_debug:0 mmc_debug2:0
00:00:07.851 [info] mmc-bcm2835 3f300000.mmcnr: DMA channel allocated
00:00:07.851 [info] sdhost: log_buf @ (ptrval) (f0113000)
00:00:07.852 [warn] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
00:00:07.852 [warn] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
00:00:07.852 [warn] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
00:00:07.852 [warn] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
00:00:07.852 [info] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1)
00:00:07.853 [info] of_cfs_init
00:00:07.853 [info] of_cfs_init: OK
00:00:07.853 [info] Waiting for root device /dev/mmcblk0p2...
00:00:07.853 [warn] Indeed it is in host mode hprt0 = 00021501
00:00:07.854 [info] random: fast init done
00:00:07.855 [info] mmc1: new high speed SDIO card at address 0001
00:00:07.856 [warn] mmc0: host does not support reading read-only switch, assuming write-enable
00:00:07.856 [info] mmc0: new high speed SDHC card at address aaaa
00:00:07.856 [info] mmcblk0: mmc0:aaaa SD32G 29.7 GiB
00:00:07.856 [info] mmcblk0: p1 p2 p3
00:00:07.856 [info] VFS: Mounted root (squashfs filesystem) readonly on device 179:2.
00:00:07.857 [info] devtmpfs: mounted
00:00:07.857 [info] Freeing unused kernel memory: 1024K
00:00:07.857 [info] Run /sbin/init as init process
00:00:07.857 [debug] with arguments:
00:00:07.857 [debug] /sbin/init
00:00:07.858 [debug] with environment:
00:00:07.858 [debug] HOME=/
00:00:07.859 [debug] TERM=linux
00:00:07.859 [info] usb 1-1: new high-speed USB device number 2 using dwc_otg
00:00:07.860 [warn] Indeed it is in host mode hprt0 = 00001101
00:00:07.860 [info] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts:
00:00:07.860 [info] usb 1-1: New USB device found, idVendor=0424, idProduct=2514, bcdDevice= b.b3
00:00:07.860 [info] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
00:00:07.861 [info] hub 1-1:1.0: USB hub found
00:00:07.861 [info] hub 1-1:1.0: 4 ports detected
00:00:07.861 [info] random: crng init done
00:00:07.861 [info] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
00:00:07.861 [info] usb 1-1.1: New USB device found, idVendor=0424, idProduct=2514, bcdDevice= b.b3
00:00:07.862 [info] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
00:00:07.862 [info] hub 1-1.1:1.0: USB hub found
00:00:07.862 [info] hub 1-1.1:1.0: 3 ports detected
00:00:07.863 [warn] dwc_otg_handle_wakeup_detected_intr lxstate = 2
00:00:07.863 [info] usb 1-1.1.1: new high-speed USB device number 4 using dwc_otg
00:00:07.863 [info] usb 1-1.1.1: New USB device found, idVendor=0424, idProduct=7800, bcdDevice= 3.00
00:00:07.863 [info] usb 1-1.1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
00:00:07.863 [warn] heart: nerves_heart v1.0.0 started.
00:00:08.100 [warn] heart: kernel watchdog activated (interval 5s)
00:00:08.101 [info] libphy: Fixed MDIO Bus: probed
21:00:08.262 [info] lan78xx 1-1.1.1:1.0 (unnamed net_device) (uninitialized): No External EEPROM. Setting MAC Speed
21:00:08.262 [info] libphy: lan78xx-mdiobus: probed
21:00:08.301 [info] lan78xx 1-1.1.1:1.0 (unnamed net_device) (uninitialized): int urb period 64
21:00:08.346 [info] RTC (NervesTime.FileTime) reports that the time is ~N[2022-01-20 22:15:08]
21:00:08.361 [debug] Starting /usr/sbin/ntpd with: ["-n", "-S", "/srv/erlang/lib/nerves_time-0.4.4/priv/ntpd_script", "-p", "0.pool.ntp.org", "-p", "1.pool.ntp.org", "-p", "2.pool.ntp.org", "-p", "3.pool.ntp.org"]
19:15:08.003 [info] usbcore: registered new interface driver lan78xx
19:15:08.004 [info] nerves_time set system clock to 2022-01-20 22:15:08 UTC
19:15:08.262 [debug] VintageNet(ppp0): :configured -> internal configure (VintageNetMobile)
19:15:08.265 [warn] RouteManager: new set_connection_status ppp0} -> :disconnected (unknown)
19:15:08.315 [warn] vc_sm_cma: module is from the staging directory, the quality is unknown, you have been warned.
19:15:08.315 [info] bcm2835_vc_sm_cma_probe: Videocore shared memory driver
19:15:08.316 [info] [vc_sm_connected_init]: start
19:15:08.316 [info] [vc_sm_connected_init]: installed successfully
19:15:08.364 [info] mc: Linux media interface: v0.10
19:15:08.384 [info] videodev: Linux video capture interface: v2.00
19:15:08.386 [info] PMControl(ppp0): Powering on
19:15:08.419 [warn] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned.
19:15:08.466 [warn] bcm2835_codec: module is from the staging directory, the quality is unknown, you have been warned.
19:15:08.466 [info] bcm2835-codec bcm2835-codec: Device registered as /dev/video10
19:15:08.466 [info] bcm2835-codec bcm2835-codec: Loaded V4L2 decode
19:15:08.467 [info] bcm2835-codec bcm2835-codec: Device registered as /dev/video11
19:15:08.467 [info] bcm2835-codec bcm2835-codec: Loaded V4L2 encode
19:15:08.467 [info] bcm2835-codec bcm2835-codec: Device registered as /dev/video12
19:15:08.467 [info] bcm2835-codec bcm2835-codec: Loaded V4L2 isp
19:15:08.467 [info] bcm2835-codec bcm2835-codec: Device registered as /dev/video18
19:15:08.468 [info] bcm2835-codec bcm2835-codec: Loaded V4L2 image_fx
19:15:08.531 [warn] bcm2835_v4l2: module is from the staging directory, the quality is unknown, you have been warned.
19:15:08.709 [debug] VintageNet(wlan0): :configured -> internal configure (VintageNetWiFi)
19:15:08.711 [warn] RouteManager: new set_connection_status wlan0} -> :disconnected (unknown)
19:15:08.873 [warn] mdns_lite: the :host app environment option is deprecated. Change to :hosts
19:15:09.214 [warn] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned.
19:15:09.224 [info] bcm2835_audio bcm2835_audio: card created with 4 channels
19:15:09.224 [info] bcm2835_audio bcm2835_audio: card created with 4 channels
19:15:09.285 [warn] bcm2835_isp: module is from the staging directory, the quality is unknown, you have been warned.
19:15:09.294 [info] bcm2835-isp bcm2835-isp: Device node output[0] registered as /dev/video13
19:15:09.295 [info] bcm2835-isp bcm2835-isp: Device node capture[0] registered as /dev/video14
19:15:09.296 [info] bcm2835-isp bcm2835-isp: Device node capture[1] registered as /dev/video15
19:15:09.297 [info] bcm2835-isp bcm2835-isp: Device node stats[2] registered as /dev/video16
19:15:09.297 [info] bcm2835-isp bcm2835-isp: Register output node 0 with media controller
19:15:09.297 [info] bcm2835-isp bcm2835-isp: Register capture node 1 with media controller
19:15:09.297 [info] bcm2835-isp bcm2835-isp: Register capture node 2 with media controller
19:15:09.297 [info] bcm2835-isp bcm2835-isp: Register capture node 3 with media controller
19:15:09.298 [info] bcm2835-isp bcm2835-isp: Loaded V4L2 bcm2835-isp
19:15:09.364 [info] input: raspberrypi-ts as /devices/platform/soc/soc:firmware/soc:firmware:touchscreen/input/input0
19:15:09.529 [info] ** INIT: [config: "/srv/erlang/lib/ecolab-0.1.0/priv/config/mosquitto.conf"].
19:15:09.531 [info] ** INIT open: #Port<0.69>.
19:15:09.533 [debug] INIT: %{}
19:15:09.540 [info] #Reference<0.744374578.537264144.239224> - 17 - 0 - 9915 - b8:27:eb:92:9c:5f
19:15:09.641 [debug] INIT: %{}
19:15:09.643 [info] connect! :up
19:15:09.645 [info] subscription: local/+/conn
19:15:09.645 [info] subscription: local/+/vars/#
19:15:09.645 [warn] {{Tortoise, "hive"}, #Reference<0.744374578.537133059.240398>, :ok}
19:15:09.824 [info] cfg80211: Loading compiled-in X.509 certificates for regulatory database
19:15:09.944 [info] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
19:15:09.994 [info] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
19:15:10.214 [info] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
19:15:10.214 [info] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
19:15:10.224 [info] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Jan 4 2021 19:56:29 version 7.45.229 (617f1f5 CY) FWID 01-2dbd9d2e
19:15:10.258 [debug] VintageNet(wlan0): :retrying -> wlan0 up
19:15:10.259 [info] RouteManager: clear_route wlan0
19:15:10.262 [warn] RouteManager: new set_connection_status wlan0} -> :disconnected (unknown)
19:15:10.314 [info] brcmfmac: brcmf_cfg80211_set_power_mgmt: power save enabled
19:15:11.482 [debug] wpa_supplicant: Successfully initialized wpa_supplicant
19:15:11.683 [debug] wpa_supplicant: wlan0: CTRL-EVENT-REGDOM-CHANGE init=USER type=COUNTRY alpha2=BR
19:15:12.834 [info] usb 1-1.1.2: new high-speed USB device number 5 using dwc_otg
19:15:12.964 [info] usb 1-1.1.2: New USB device found, idVendor=12d1, idProduct=157c, bcdDevice= 1.02
19:15:12.965 [info] usb 1-1.1.2: New USB device strings: Mfr=5, Product=4, SerialNumber=7
19:15:12.965 [info] usb 1-1.1.2: Product: HUAWEI Mobile
19:15:12.965 [info] usb 1-1.1.2: Manufacturer: HUAWEI Technology
19:15:12.966 [info] usb 1-1.1.2: SerialNumber: FFFFFFFFFFFFFFFF
19:15:12.966 [info] usb-storage 1-1.1.2:1.0: USB Mass Storage device detected
19:15:12.974 [info] scsi host0: usb-storage 1-1.1.2:1.0
19:15:14.024 [info] scsi 0:0:0:0: CD-ROM HUAWEI Mass Storage 2.31 PQ: 0 ANSI: 2
19:15:14.024 [info] scsi 0:0:0:1: Direct-Access HUAWEI TF CARD Storage 2.31 PQ: 0 ANSI: 2
19:15:14.084 [info] sd 0:0:0:1: [sda] Attached SCSI removable disk
19:15:14.505 [info] WPASupplicant ignoring {:event, "WPS-AP-AVAILABLE"}
19:15:14.506 [debug] wpa_supplicant: wlan0: Trying to associate with SSID 'VIVOFIBRA-6071'
19:15:14.506 [info] wpa_supplicant(wlan0): Trying to associate with SSID 'VIVOFIBRA-6071'
19:15:17.511 [info] RouteManager: set_connection_status wlan0 -> :lan (ifup)
19:15:17.511 [debug] [vintage_net(wlan0)] starting udhcpc
19:15:17.525 [debug] udhcpc(wlan0): udhcpc: started, v1.33.1
19:15:17.538 [info] wlan0 dhcp deconfig: %{"BINDIR" => "/usr/lib/erlang/erts-12.1.5/bin", "EMU" => "beam", "ERL_CRASH_DUMP" => "/root/crash.dump", "ERL_INETRC" => "/etc/erl_inetrc", "HEART_BEAT_TIMEOUT" => "30", "HOME" => "/root", "LANG" => "en_US.UTF-8", "LANGUAGE" => "en", "PATH" => "/usr/lib/erlang/erts-12.1.5/bin:/srv/erlang/bin:/usr/sbin:/usr/bin:/sbin:/bin", "PROGNAME" => "erlexec", "RELEASE_ROOT" => "/srv/erlang", "RELEASE_SYS_CONFIG" => "/srv/erlang/releases/0.1.0/sys", "RELEASE_TMP" => "/tmp", "ROOTDIR" => "/srv/erlang", "TERM" => "vt100", "interface" => "wlan0"}
19:15:17.539 [info] RouteManager: clear_route wlan0
19:15:17.541 [debug] udhcpc(wlan0): udhcpc: sending discover
19:15:17.548 [debug] wpa_supplicant: wlan0: Associated with 86:7e:ca:3d:60:7e
19:15:17.549 [debug] wpa_supplicant: wlan0: CTRL-EVENT-CONNECTED - Connection to 86:7e:ca:3d:60:7e completed [id=0 id_str=]
19:15:17.549 [info] wpa_supplicant(wlan0): Associated with 86:7e:ca:3d:60:7e
19:15:17.550 [info] Connected to AP: 86:7e:ca:3d:60:7e
19:15:17.552 [debug] wpa_supplicant: wlan0: CTRL-EVENT-SUBNET-STATUS-UPDATE status=0
19:15:17.552 [debug] wpa_supplicant: wlan0: CTRL-EVENT-REGDOM-CHANGE init=COUNTRY_IE type=COUNTRY alpha2=BR
19:15:17.554 [info] WPASupplicant ignoring {:event, "CTRL-EVENT-SUBNET-STATUS-UPDATE", %{"status" => "0"}}
19:15:17.554 [info] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
19:15:17.555 [info] WPASupplicant ignoring {:event, "CTRL-EVENT-REGDOM-CHANGE", %{"alpha2" => "BR", "init" => "COUNTRY_IE", "type" => "COUNTRY"}}
19:15:17.702 [debug] udhcpc(wlan0): udhcpc: sending select for 192.168.15.15
19:15:18.019 [warn] RouteManager: new set_connection_status wlan0} -> :lan (timeout)
19:15:18.974 [debug] udhcpc(wlan0): udhcpc: lease of 192.168.15.15 obtained, lease time 14400
19:15:18.980 [debug] udhcpc.renew(wlan0): %{"BINDIR" => "/usr/lib/erlang/erts-12.1.5/bin", "EMU" => "beam", "ERL_CRASH_DUMP" => "/root/crash.dump", "ERL_INETRC" => "/etc/erl_inetrc", "HEART_BEAT_TIMEOUT" => "30", "HOME" => "/root", "LANG" => "en_US.UTF-8", "LANGUAGE" => "en", "PATH" => "/usr/lib/erlang/erts-12.1.5/bin:/srv/erlang/bin:/usr/sbin:/usr/bin:/sbin:/bin", "PROGNAME" => "erlexec", "RELEASE_ROOT" => "/srv/erlang", "RELEASE_SYS_CONFIG" => "/srv/erlang/releases/0.1.0/sys", "RELEASE_TMP" => "/tmp", "ROOTDIR" => "/srv/erlang", "TERM" => "vt100", "broadcast" => "192.168.15.255", "dns" => ["192.168.15.1"], "interface" => "wlan0", "ip" => "192.168.15.15", "lease" => "14400", "mask" => "24", "ntpsrv" => "200.160.7.193", "opt125" => "00000de9210406303039303936050c3938374543413344363037310609525446383131355657", "opt53" => "05", "opt58" => "00001c20", "opt59" => "00003138", "router" => ["192.168.15.1"], "serverid" => "192.168.15.1", "subnet" => "255.255.255.0"}
19:15:18.991 [info] RouteManager: set_route wlan0: IP: [{{192, 168, 15, 15}, 24}], GW: {192, 168, 15, 1}
19:15:19.072 [info] RouteManager: set_connection_status wlan0 -> :internet (timeout)
322 out of 322 new messages shown.
:ok
iex(2)> RingLogger.attach
:ok
19:16:29.567 [info] PMControl(ppp0): Start powering off
19:16:29.568 [info] PMControl(ppp0): Complete power off
19:16:29.753 [info] PMControl(ppp0): Powering on
19:16:29.969 [info] usb 1-1.1.2: USB disconnect, device number 5
19:16:40.919 [info] usb 1-1.1.2: new high-speed USB device number 6 using dwc_otg
19:16:41.049 [info] usb 1-1.1.2: New USB device found, idVendor=12d1, idProduct=158e, bcdDevice= 1.02
19:16:41.050 [info] usb 1-1.1.2: New USB device strings: Mfr=4, Product=3, SerialNumber=6
19:16:41.051 [info] usb 1-1.1.2: Product: HUAWEI Mobile
19:16:41.051 [info] usb 1-1.1.2: Manufacturer: HUAWEI Technology
19:16:41.051 [info] usb 1-1.1.2: SerialNumber: FFFFFFFFFFFFFFFF
19:16:41.059 [info] usb-storage 1-1.1.2:1.2: USB Mass Storage device detected
19:16:41.060 [info] scsi host0: usb-storage 1-1.1.2:1.2
19:16:41.099 [info] usbcore: registered new interface driver option
19:16:41.099 [info] usbserial: USB Serial support registered for GSM modem (1-port)
19:16:41.099 [info] option 1-1.1.2:1.0: GSM modem (1-port) converter detected
19:16:41.100 [info] usb 1-1.1.2: GSM modem (1-port) converter now attached to ttyUSB0
19:16:41.100 [info] option 1-1.1.2:1.1: GSM modem (1-port) converter detected
19:16:41.101 [info] usb 1-1.1.2: GSM modem (1-port) converter now attached to ttyUSB1
19:16:41.199 [info] usbcore: registered new interface driver cdc_ether
19:16:41.213 [debug] VintageNet(ppp0): :retrying -> wwan0 up
19:16:41.213 [info] RouteManager: clear_route ppp0
19:16:41.220 [info] cdc_ncm 1-1.1.2:1.3: MAC-Address: 0c:5b:8f:27:9a:64
19:16:41.220 [info] cdc_ncm 1-1.1.2:1.3: setting rx_max = 16384
19:16:41.221 [info] cdc_ncm 1-1.1.2:1.3: setting tx_max = 16384
19:16:41.221 [info] cdc_ncm 1-1.1.2:1.3 wwan0: register 'cdc_ncm' at usb-3f980000.usb-1.1.2, Mobile Broadband Network Device, 0c:5b:8f:27:9a:64
19:16:41.221 [warn] RouteManager: new set_connection_status ppp0} -> :disconnected (unknown)
19:16:41.221 [info] usbcore: registered new interface driver cdc_ncm
19:16:41.379 [info] PPP generic driver version 2.4.2
19:16:41.381 [info] Jan 20 22:16:41 pppd[281]: pppd 2.4.8 started by root, uid 0
19:16:42.089 [info] scsi 0:0:0:0: Direct-Access HUAWEI TF CARD Storage 2.31 PQ: 0 ANSI: 2
19:16:42.139 [info] sd 0:0:0:0: [sda] Attached SCSI removable disk
19:16:42.277 [warn] Send "ATE0" failed: {:error, :timeout}. Ignoring...
19:16:42.403 [info] Jan 20 22:16:42 chat[285]: abort on (BUSY)
19:16:42.403 [info] Jan 20 22:16:42 chat[285]: abort on (NO CARRIER)
19:16:42.403 [info] Jan 20 22:16:42 chat[285]: abort on (NO DIALTONE)
19:16:42.404 [info] Jan 20 22:16:42 chat[285]: abort on (NO DIAL TONE)
19:16:42.404 [info] Jan 20 22:16:42 chat[285]: abort on (NO ANSWER)
19:16:42.404 [info] Jan 20 22:16:42 chat[285]: abort on (DELAYED)
19:16:42.404 [info] Jan 20 22:16:42 chat[285]: timeout set to 10 seconds
19:16:42.404 [info] Jan 20 22:16:42 chat[285]: report (CONNECT)
19:16:42.404 [info] Jan 20 22:16:42 chat[285]: send (+++^M)
19:16:42.444 [info] Jan 20 22:16:42 chat[285]: send (AT^M)
19:16:42.474 [info] Jan 20 22:16:42 chat[285]: expect (OK)
19:16:42.779 [warn] Unexpected AT+CIMI response: {:error, :timeout}
19:16:43.281 [warn] Send "AT+QCCID" failed: {:error, :timeout}. Ignoring...
19:16:52.474 [info] Jan 20 22:16:52 chat[285]: alarm
19:16:52.474 [info] Jan 20 22:16:52 chat[285]: Failed
19:16:52.475 [debug] Jan 20 22:16:52 pppd[281]: Script chat -v -f /tmp/vintage_net/chatscript.ppp0 finished (pid 285), status = 0x3
19:16:52.475 [error] Jan 20 22:16:52 pppd[281]: Connect script failed
19:17:24.516 [info] Jan 20 22:17:24 chat[287]: abort on (BUSY)
19:17:24.516 [info] Jan 20 22:17:24 chat[287]: abort on (NO CARRIER)
19:17:24.516 [info] Jan 20 22:17:24 chat[287]: abort on (NO DIALTONE)
19:17:24.516 [info] Jan 20 22:17:24 chat[287]: abort on (NO DIAL TONE)
19:17:24.516 [info] Jan 20 22:17:24 chat[287]: abort on (NO ANSWER)
19:17:24.516 [info] Jan 20 22:17:24 chat[287]: abort on (DELAYED)
19:17:24.517 [info] Jan 20 22:17:24 chat[287]: timeout set to 10 seconds
19:17:24.517 [info] Jan 20 22:17:24 chat[287]: report (CONNECT)
19:17:24.517 [info] Jan 20 22:17:24 chat[287]: send (+++^M)
19:17:24.556 [info] Jan 20 22:17:24 chat[287]: send (AT^M)
19:17:24.587 [info] Jan 20 22:17:24 chat[287]: expect (OK)
19:17:24.588 [info] Jan 20 22:17:24 chat[287]: +++^MAT^M^M
19:17:24.588 [info] Jan 20 22:17:24 chat[287]: OK
19:17:24.589 [info] Jan 20 22:17:24 chat[287]: -- got it
19:17:24.589 [info] Jan 20 22:17:24 chat[287]: send (ATH^M)
19:17:24.628 [info] Jan 20 22:17:24 chat[287]: expect (OK)
19:17:24.629 [info] Jan 20 22:17:24 chat[287]: ^M
19:17:24.634 [info] Jan 20 22:17:24 chat[287]: ATH^M^M
19:17:24.634 [info] Jan 20 22:17:24 chat[287]: OK
19:17:24.634 [info] Jan 20 22:17:24 chat[287]: -- got it
19:17:24.634 [info] Jan 20 22:17:24 chat[287]: send (ATZ^M)
19:17:24.671 [info] Jan 20 22:17:24 chat[287]: expect (OK)
19:17:24.671 [info] Jan 20 22:17:24 chat[287]: ^M
19:17:24.676 [info] Jan 20 22:17:24 chat[287]: ATZ^M^M
19:17:24.676 [info] Jan 20 22:17:24 chat[287]: OK
19:17:24.676 [info] Jan 20 22:17:24 chat[287]: -- got it
19:17:24.677 [info] Jan 20 22:17:24 chat[287]: send (ATQ0^M)
19:17:24.723 [info] Jan 20 22:17:24 chat[287]: expect (OK)
19:17:24.723 [info] Jan 20 22:17:24 chat[287]: ^M
19:17:24.728 [info] Jan 20 22:17:24 chat[287]: ATQ0^M^M
19:17:24.728 [info] Jan 20 22:17:24 chat[287]: OK
19:17:24.728 [info] Jan 20 22:17:24 chat[287]: -- got it
19:17:24.728 [info] Jan 20 22:17:24 chat[287]: send (AT+CGDCONT=1,"IP","claro.com.br"^M)
19:17:25.057 [info] Jan 20 22:17:25 chat[287]: expect (OK)
19:17:25.057 [info] Jan 20 22:17:25 chat[287]: ^M
19:17:25.062 [info] Jan 20 22:17:25 chat[287]: AT+CGDCONT=1,"IP","claro.com.br"^M^M
19:17:25.062 [info] Jan 20 22:17:25 chat[287]: OK
19:17:25.062 [info] Jan 20 22:17:25 chat[287]: -- got it
19:17:25.063 [info] Jan 20 22:17:25 chat[287]: send (ATDT*99***1#^M)
19:17:25.194 [info] Jan 20 22:17:25 chat[287]: expect (CONNECT)
19:17:25.194 [info] Jan 20 22:17:25 chat[287]: ^M
19:17:25.199 [info] Jan 20 22:17:25 chat[287]: ATDT*99***1#^M^M
19:17:25.199 [info] Jan 20 22:17:25 chat[287]: CONNECT
19:17:25.200 [info] Jan 20 22:17:25 chat[287]: -- got it
19:17:25.200 [info] Jan 20 22:17:25 chat[287]: send (^M)
19:17:25.207 [debug] Jan 20 22:17:25 pppd[281]: Script chat -v -f /tmp/vintage_net/chatscript.ppp0 finished (pid 287), status = 0x0
19:17:25.208 [info] Jan 20 22:17:25 pppd[281]: Serial connection established.
19:17:25.238 [debug] Jan 20 22:17:25 pppd[281]: using channel 1
19:17:25.238 [info] Jan 20 22:17:25 pppd[281]: Using interface ppp0
19:17:25.239 [info] Jan 20 22:17:25 pppd[281]: Connect: ppp0 <--> /dev/ttyUSB1
19:17:26.240 [debug] Jan 20 22:17:26 pppd[281]: sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0xd1b5f228> <pcomp> <accomp>]
19:17:29.243 [debug] Jan 20 22:17:29 pppd[281]: sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0xd1b5f228> <pcomp> <accomp>]
19:17:32.247 [debug] Jan 20 22:17:32 pppd[281]: sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0xd1b5f228> <pcomp> <accomp>]
19:17:34.766 [info] PMControl(ppp0): Start powering off
19:17:34.770 [info] PMControl(ppp0): Complete power off
19:17:34.782 [info] PMControl(ppp0): Powering on
19:17:34.794 [error] Huawei E3372 modeswitch failed with 'Look for default devices ...
Found devices in default mode (1)
Access device 006 on bus 001
Get the current device configuration ...
Current configuration number is 1
Use interface number 0
with class 255
'
19:17:35.250 [debug] Jan 20 22:17:35 pppd[281]: sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0xd1b5f228> <pcomp> <accomp>]
19:17:38.253 [debug] Jan 20 22:17:38 pppd[281]: sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0xd1b5f228> <pcomp> <accomp>]
19:17:41.257 [debug] Jan 20 22:17:41 pppd[281]: sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0xd1b5f228> <pcomp> <accomp>]
19:17:44.259 [debug] Jan 20 22:17:44 pppd[281]: sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0xd1b5f228> <pcomp> <accomp>]
19:17:47.263 [debug] Jan 20 22:17:47 pppd[281]: sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0xd1b5f228> <pcomp> <accomp>]
19:17:50.266 [debug] Jan 20 22:17:50 pppd[281]: sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0xd1b5f228> <pcomp> <accomp>]
19:17:53.269 [debug] Jan 20 22:17:53 pppd[281]: sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0xd1b5f228> <pcomp> <accomp>]
19:17:56.273 [warn] Jan 20 22:17:56 pppd[281]: LCP: timeout sending Config-Requests
19:17:56.273 [info] Jan 20 22:17:56 pppd[281]: Connection terminated.
19:17:57.330 [info] Jan 20 22:17:57 pppd[281]: Modem hangup
19:18:28.369 [info] Jan 20 22:18:28 chat[293]: abort on (BUSY)
19:18:28.370 [info] Jan 20 22:18:28 chat[293]: abort on (NO CARRIER)
19:18:28.370 [info] Jan 20 22:18:28 chat[293]: abort on (NO DIALTONE)
19:18:28.370 [info] Jan 20 22:18:28 chat[293]: abort on (NO DIAL TONE)
19:18:28.370 [info] Jan 20 22:18:28 chat[293]: abort on (NO ANSWER)
19:18:28.370 [info] Jan 20 22:18:28 chat[293]: abort on (DELAYED)
19:18:28.370 [info] Jan 20 22:18:28 chat[293]: timeout set to 10 seconds
19:18:28.371 [info] Jan 20 22:18:28 chat[293]: report (CONNECT)
19:18:28.371 [info] Jan 20 22:18:28 chat[293]: send (+++^M)
19:18:28.410 [info] Jan 20 22:18:28 chat[293]: send (AT^M)
19:18:28.441 [info] Jan 20 22:18:28 chat[293]: expect (OK)
19:18:38.441 [info] Jan 20 22:18:38 chat[293]: alarm
19:18:38.441 [info] Jan 20 22:18:38 chat[293]: Failed
19:18:38.445 [debug] Jan 20 22:18:38 pppd[281]: Script chat -v -f /tmp/vintage_net/chatscript.ppp0 finished (pid 293), status = 0x3
19:18:38.445 [error] Jan 20 22:18:38 pppd[281]: Connect script failed
19:18:39.796 [info] PMControl(ppp0): Start powering off
19:18:39.797 [info] PMControl(ppp0): Complete power off
19:18:39.808 [info] PMControl(ppp0): Powering on
19:18:39.819 [error] Huawei E3372 modeswitch failed with 'Look for default devices ...
Found devices in default mode (1)
Access device 006 on bus 001
Get the current device configuration ...
Current configuration number is 1
Use interface number 0
with class 255
'
19:19:10.482 [info] Jan 20 22:19:10 chat[299]: abort on (BUSY)
19:19:10.483 [info] Jan 20 22:19:10 chat[299]: abort on (NO CARRIER)
19:19:10.483 [info] Jan 20 22:19:10 chat[299]: abort on (NO DIALTONE)
19:19:10.483 [info] Jan 20 22:19:10 chat[299]: abort on (NO DIAL TONE)
19:19:10.483 [info] Jan 20 22:19:10 chat[299]: abort on (NO ANSWER)
19:19:10.483 [info] Jan 20 22:19:10 chat[299]: abort on (DELAYED)
19:19:10.483 [info] Jan 20 22:19:10 chat[299]: timeout set to 10 seconds
19:19:10.484 [info] Jan 20 22:19:10 chat[299]: report (CONNECT)
19:19:10.484 [info] Jan 20 22:19:10 chat[299]: send (+++^M)
19:19:10.523 [info] Jan 20 22:19:10 chat[299]: send (AT^M)
19:19:10.554 [info] Jan 20 22:19:10 chat[299]: expect (OK)
19:19:20.554 [info] Jan 20 22:19:20 chat[299]: alarm
19:19:20.554 [info] Jan 20 22:19:20 chat[299]: Failed
19:19:20.555 [debug] Jan 20 22:19:20 pppd[281]: Script chat -v -f /tmp/vintage_net/chatscript.ppp0 finished (pid 299), status = 0x3
19:19:20.555 [error] Jan 20 22:19:20 pppd[281]: Connect script failed
19:19:44.821 [info] PMControl(ppp0): Start powering off
19:19:44.822 [info] PMControl(ppp0): Complete power off
19:19:44.833 [info] PMControl(ppp0): Powering on
19:19:44.844 [error] Huawei E3372 modeswitch failed with 'Look for default devices ...
Found devices in default mode (1)
Access device 006 on bus 001
Get the current device configuration ...
Current configuration number is 1
Use interface number 0
with class 255
|
What about using udev rules? |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Describe the bug
A Huawei E3372 modem I have has a pid of
0x1F01instead of0x14FEas what the driver currently expects.What should be done about this? Clearly, making the PID configurable would work to some extent, but that would still make it a guessing game, if one doesn't already know what PID the modem has.
What would be a good way to make this automatic?
The text was updated successfully, but these errors were encountered: