From 6328c06383d9601a32625777f5c20e2fce078453 Mon Sep 17 00:00:00 2001
From: Lucian Chapar <33263520+lucian151@users.noreply.github.com>
Date: Sat, 7 Sep 2024 13:32:14 -0400
Subject: [PATCH] Clarifies x gantry motor connector orientation checks

---
 docs/lumen/pack-out/index.md | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/docs/lumen/pack-out/index.md b/docs/lumen/pack-out/index.md
index 03675f61..5515ab0c 100644
--- a/docs/lumen/pack-out/index.md
+++ b/docs/lumen/pack-out/index.md
@@ -74,7 +74,8 @@
 	* `z-belt-loop` feels appropriately tensioned when plucked
 	* Each `z-gantry` moves smoothly when actuated back-and-forth by hand
 	* 1x `M5-hex-nut` is installed in `x-gantry-back` for mounting `cable-splay`
-	* `NEMA-17-stepper-motor` wire connector faces `z-limit-switch`
+	* The wire connector on `NEMA-17-stepper-motor` that is attached to `x-gantry-front`  faces `z-limit-switch`
+	* The wire connector on `NEMA-17-stepper-motor` that is attached to `x-motor-mount` faces away from `xy-limit-switch`
 	* `linear-rail` is centered atop `alu-extrusion`
 	* `x-idler-mount` and `x-motor-mount` are secured to `alu-extrusion` with 2x `M5x10-bolt` per side
 	* `belt-tensioner-arm` is installed on `x-idler-mount` in the correct orientation (IE acorn-nut facing touches print)