Bluetui blank on startup, arch #40

patroldo · 2024-12-25T09:42:21Z

patroldo
Dec 25, 2024

Hi. For some reason when i start "bluetui" - only blank terminal without any symbol on it. Sometimes it's working fine

Version:

$ bluetui --version
bluetui 0.6.0

Bluetooth service is running

$ systemctl status bluetooth
● bluetooth.service - Bluetooth service
     Loaded: loaded (/usr/lib/
systemd/system/bluetooth.service; enabled; preset: disabled
)
     Active: active (running) since Wed 2024-12-25 11:24:34 EET; 14min ago
 Invocation: 051ff7df69f24ed19721ccbe1464c1c1
       Docs: man:bluetoothd(8)
   Main PID: 636 (bluetoothd)
     Status: "Running"
      Tasks: 1 (limit: 38269)
     Memory: 3.3M (peak: 3.7M)
        CPU: 31ms
     CGroup: /system.slice/bluetooth.service
             └─636 /usr/lib/bluetooth/bluetoothd

Dec 25 11:24:34 archlinux bluetoothd[636]: src/plugin.c:
init_plugin() System does not support bap plugin
Dec 25 11:24:34 archlinux bluetoothd[636]: src/plugin.c:
init_plugin() System does not support bass plugin
Dec 25 11:24:34 archlinux bluetoothd[636]: src/plugin.c:
init_plugin() System does not support mcp plugin
Dec 25 11:24:34 archlinux bluetoothd[636]: src/plugin.c:
init_plugin() System does not support vcp plugin
Dec 25 11:24:34 archlinux bluetoothd[636]: profiles/audi
o/micp.c:micp_init() D-Bus experimental not enabled
Dec 25 11:24:34 archlinux bluetoothd[636]: src/plugin.c:
init_plugin() System does not support micp plugin
Dec 25 11:24:34 archlinux bluetoothd[636]: src/plugin.c:
init_plugin() System does not support ccp plugin
Dec 25 11:24:34 archlinux bluetoothd[636]: src/plugin.c:
init_plugin() System does not support csip plugin
Dec 25 11:24:34 archlinux bluetoothd[636]: src/plugin.c:
init_plugin() System does not support asha plugin
Dec 25 11:24:34 archlinux bluetoothd[636]: Bluetooth management interface 1.23 initialized

I can Exit with "q"

pythops · 2024-12-25T10:35:15Z

pythops
Dec 25, 2024
Maintainer

🤔
Does bluetoothctl command works for you ?

0 replies

patroldo · 2024-12-25T10:50:20Z

patroldo
Dec 25, 2024
Author

Hi, @pythops
Next time when i reproduce this problem - i will let you know

Basically you propose to connect to bluetooth via bluetoothctl and see if it works, right?

0 replies

pythops · 2024-12-25T11:31:45Z

pythops
Dec 25, 2024
Maintainer

I just try to know where the problem is for you, if bluetoothctl works, then bluetui should work as well. But I suspect something with your setup, with all the log messages you showed above specially this one

o/micp.c:micp_init() D-Bus experimental not enabled

bluetui (same as bluetoothctl) uses dbus to interact with the daemon, so if something is off with dbus then it won't work.

0 replies

patroldo · 2024-12-25T12:59:41Z

patroldo
Dec 25, 2024
Author

[yurii@archlinux ~]$ bluetoothctl
[bluetooth]# Agent registered
[bluetooth]#

Just reproduced. Looks like bluetoothctl is working fine

0 replies

patroldo · 2024-12-25T13:07:19Z

patroldo
Dec 25, 2024
Author

Hm. Just checked dmesg and this is what i see

$ sudo dmesg | grep -i bluetooth
[sudo] password for yurii: 
[    8.954235] Bluetooth: Core ver 2.22
[    8.954257] NET: Registered PF_BLUETOOTH protocol family
[    8.954259] Bluetooth: HCI device and connection manager initialized
[    8.954263] Bluetooth: HCI socket layer initialized
[    8.954266] Bluetooth: L2CAP socket layer initialized
[    8.954270] Bluetooth: SCO socket layer initialized
[    8.983038] Bluetooth: hci0: CSR: Setting up dongle with HCI ver=9 rev=0001
[    8.983042] Bluetooth: hci0: LMP ver=9 subver=0001; manufacturer=2279
[    8.983044] Bluetooth: hci0: CSR: Unbranded CSR clone detected; adding workarounds and force-suspending once...
[    8.983048] Bluetooth: hci0: CSR: Couldn't suspend the device for our Barrot 8041a02 receive-issue workaround
[    8.983053] Bluetooth: hci0: HCI Delete Stored Link Key command is advertised, but not supported.
[    8.983055] Bluetooth: hci0: HCI Read Default Erroneous Data Reporting command is advertised, but not supported.
[    8.983057] Bluetooth: hci0: HCI Set Event Filter command not supported.
[    9.880170] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    9.880174] Bluetooth: BNEP filters: protocol multicast
[    9.880178] Bluetooth: BNEP socket layer initialized
[   12.166963] Bluetooth: hci0: Opcode 0x1005 failed: -110
[   12.166969] Bluetooth: hci0: command 0x1005 tx timeout

Looks like issue with drivers, device or configuration i guess, so it's not a problem directly connected to bluetui. But maybe it's possible to add logs. Or if it's already there - would be helpful to add instruction to get it :)

0 replies

patroldo · 2024-12-25T13:17:07Z

patroldo
Dec 25, 2024
Author

After checking arch linux forum - looks like i have bluetooth dongle which is not recognized as known by linux kernel. Basic w/a which just worked for me from this post - https://bbs.archlinux.org/viewtopic.php?id=274953. Steps:

create this file:
/etc/modprobe.d/btusb.conf
Add following line:
options btusb enable_autosuspend=0

So i hope problem is gone. For now logs from dmesg looks like this:

$ sudo dmesg | grep -i bluetooth
[    7.636781] Bluetooth: Core ver 2.22
[    7.636810] NET: Registered PF_BLUETOOTH protocol family
[    7.636812] Bluetooth: HCI device and connection manager initialized
[    7.636818] Bluetooth: HCI socket layer initialized
[    7.636821] Bluetooth: L2CAP socket layer initialized
[    7.636827] Bluetooth: SCO socket layer initialized
[    7.702296] Bluetooth: hci0: CSR: Setting up dongle with HCI ver=10 rev=0089
[    7.702300] Bluetooth: hci0: LMP ver=10 subver=0089; manufacturer=2279
[    7.702303] Bluetooth: hci0: CSR: Unbranded CSR clone detected; adding workarounds and force-suspending once...
[    7.702307] Bluetooth: hci0: CSR: Couldn't suspend the device for our Barrot 8041a02 receive-issue workaround
[    7.702309] Bluetooth: hci0: HCI Delete Stored Link Key command is advertised, but not supported.
[    7.702312] Bluetooth: hci0: HCI Read Default Erroneous Data Reporting command is advertised, but not supported.
[    7.702313] Bluetooth: hci0: HCI Set Event Filter command not supported.
[    8.549860] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    8.549865] Bluetooth: BNEP filters: protocol multicast
[    8.549871] Bluetooth: BNEP socket layer initialized
[    8.941422] Bluetooth: MGMT ver 1.23
[   14.028745] Bluetooth: RFCOMM TTY layer initialized
[   14.028760] Bluetooth: RFCOMM socket layer initialized
[   14.028766] Bluetooth: RFCOMM ver 1.11

And bluetooth service logs:

$ systemctl status bluetooth
● bluetooth.service - Bluetooth service
     Loaded: loaded (/usr/lib/
systemd/system/bluetooth.service; enabled; preset: disabled
)
     Active: active (running) since Wed 2024-12-25 15:12:32 EET; 4min 17s ago
 Invocation: b45b6736510847689885774696a80125
       Docs: man:bluetoothd(8)
   Main PID: 625 (bluetoothd)
     Status: "Running"
      Tasks: 1 (limit: 38269)
     Memory: 3.6M (peak: 4.3M)
        CPU: 73ms
     CGroup: /system.slice/bluetooth.service
             └─625 /usr/lib/bluetooth/bluetoothd

Dec 25 15:12:38 archlinux bluetoothd[625]: Endpoint registered: sender=:1.27 path=/MediaEndp
oint/A2DPSource/aptx_ll_duplex_0
Dec 25 15:12:38 archlinux bluetoothd[625]: Endpoint registered: sender=:1.27 path=/MediaEndp
oint/A2DPSource/faststream
Dec 25 15:12:38 archlinux bluetoothd[625]: Endpoint registered: sender=:1.27 path=/MediaEndp
oint/A2DPSource/faststream_duplex
Dec 25 15:12:38 archlinux bluetoothd[625]: Endpoint registered: sender=:1.27 path=/MediaEndp
oint/A2DPSink/opus_05
Dec 25 15:12:38 archlinux bluetoothd[625]: Endpoint registered: sender=:1.27 path=/MediaEndp
oint/A2DPSource/opus_05
Dec 25 15:12:38 archlinux bluetoothd[625]: Endpoint registered: sender=:1.27 path=/MediaEndp
oint/A2DPSink/opus_05_duplex
Dec 25 15:12:38 archlinux bluetoothd[625]: Endpoint registered: sender=:1.27 path=/MediaEndp
oint/A2DPSource/opus_05_duplex
Dec 25 15:13:06 archlinux bluetoothd[625]: No matching connection fo
r device
Dec 25 15:13:19 archlinux bluetoothd[625]: profiles/audio/avctp.c:av
ctp_control_confirm() Control: Refusing unexpected connect
Dec 25 15:13:55 archlinux bluetoothd[625]: /org/bluez/hci0/dev_68_59_32_87_39_1C/sep2/fd1: f
d(31) ready

Dec 25 15:13:19 archlinux bluetoothd[625]: profiles/audio/avctp.c:av
ctp_control_confirm() Control: Refusing unexpected connect - this error occurs because headphones after powering on - if no connection to device for 5 seconds, they go into "pairin" mode and due to this host is failing connect to them

0 replies

pythops · 2024-12-25T17:03:07Z

pythops
Dec 25, 2024
Maintainer

Good point, I will see if I can print logs to stderr

0 replies

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Bluetui blank on startup, arch #40

{{title}}

{{editor}}'s edit

{{editor}}'s edit

Replies: 7 comments

{{title}}

{{title}}

{{title}}

{{title}}

{{title}}

{{editor}}'s edit

{{editor}}'s edit

{{title}}

{{editor}}'s edit

{{editor}}'s edit

{{title}}

Select a reply

Bluetui blank on startup, arch #40

patroldo Dec 25, 2024

Replies: 7 comments

pythops Dec 25, 2024 Maintainer

patroldo Dec 25, 2024 Author

pythops Dec 25, 2024 Maintainer

patroldo Dec 25, 2024 Author

patroldo Dec 25, 2024 Author

patroldo Dec 25, 2024 Author

pythops Dec 25, 2024 Maintainer

patroldo
Dec 25, 2024

pythops
Dec 25, 2024
Maintainer

patroldo
Dec 25, 2024
Author

pythops
Dec 25, 2024
Maintainer

patroldo
Dec 25, 2024
Author

patroldo
Dec 25, 2024
Author

patroldo
Dec 25, 2024
Author

pythops
Dec 25, 2024
Maintainer