lr_mhi_ac_ctrl.yaml

substitutions:
  # Unique device ID in HA
  deviceid: "mhi_ac_ctrl"
  # Unique device name in HA (sensor names will be prefixed by this name)
  devicename: "MHI-AC-Ctrl"

esphome:
  name: lr_mhi_ac_ctrl
  platform: ESP8266
  board: d1_mini
  platformio_options:
    # Run CPU at 160Mhz to fix mhi_ac_ctrl_core.loop error: -2
    board_build.f_cpu: 160000000L
  includes:
    - mhi_ac_ctrl.h
    - MHI-AC-Ctrl-core.h
    - MHI-AC-Ctrl-core.cpp

wifi:
  ssid: "**SSID**"
  password: "**PASSWORD**"

  ap:
    ssid: ${devicename}

logger:
  level: DEBUG
  baud_rate: 0

globals:
  - id: room_temp_api_timeout
    type: int
    restore_value: no
    initial_value: '120'

ota:

climate:
  - platform: custom
    lambda: |-
      auto mhi_ac_ctrl = new MhiAcCtrl();
      App.register_component(mhi_ac_ctrl);
      return {mhi_ac_ctrl};

    climates:
      - name: "${devicename}"
        id: ${deviceid}

api:
  reboot_timeout: 0s
  services:
    # Call the set_api_room_temperature service from HA to override the room temperature
    # If a new value has not been received after room_temp_api_timeout seconds, it will fall back to internal sensor
    - service: set_api_room_temperature
      variables:
        value: float
      then:
        - lambda: |-
            return ((MhiAcCtrl*)id(${deviceid}))->set_room_temperature(value);
    # Call the set_vanes service from HA to set the vane position
    # Needed because the ESPHome Climate class does not support this natively
    # Possible values: 1-4: static positions, 5: swing, 0: unknown
    - service: set_vanes
      variables:
        value: int
      then:
        - lambda: |-
            return ((MhiAcCtrl*)id(${deviceid}))->set_vanes(value);

sensor:
  - platform: uptime
    name: ${devicename} Uptime
  - platform: wifi_signal
    name: ${devicename} WiFi Signal
    update_interval: 60s
  - platform: custom
    lambda: |-
      return ((MhiAcCtrl*)id(${deviceid}))->get_sensors();

    # Sensor names in HA, you can change these if you want
    # Don't delete them or change their position in the list
    sensors:
      - name: ${devicename} error code
      - name: ${devicename} outdoor temperature
      - name: ${devicename} return air temperature
      - name: ${devicename} outdoor unit fan speed
      - name: ${devicename} indoor unit fan speed
      - name: ${devicename} current power
      - name: ${devicename} compressor frequency
      - name: ${devicename} indoor unit total run time
      - name: ${devicename} compressor total run time
      - name: ${devicename} vanes
      - name: ${devicename} energy used
      - name: ${devicename} Indoor (U-bend) HE temp 1
      - name: ${devicename} Indoor (capillary) HE temp 2
      - name: ${devicename} Indoor (suction header) HE temp 3
      - name: ${devicename} Outdoor HE temp
      - name: ${devicename} Outdoor unit exp. valve
      - name: ${devicename} Outdoor unit discharge pipe
      - name: ${devicename} Outdoor unit discharge pipe super heat
      - name: ${devicename} Protection error state

binary_sensor:
  - platform: custom
    lambda: |-
      return ((MhiAcCtrl*)id(${deviceid}))->get_binary_sensors();

    binary_sensors:
      - name: ${devicename} defrost

text_sensor:
  - platform: version
    name: ${devicename} ESPHome Version
  - platform: wifi_info
    ip_address:
      name: ${devicename} IP
    ssid:
      name: ${devicename} SSID
    bssid:
      name: ${devicename} BSSID
  - platform: custom
    lambda: |-
      return ((MhiAcCtrl*)id(${deviceid}))->get_text_sensors();

    text_sensors:
      - name: ${devicename} Protection error state