i need help with bootloader mode

[NommarsX]

Hi, I tried to update opendeck M v2.2.1 from the web editor, I can't get out of safe boot mode, I don't know how to manually reboot the board as removing power doesn't solve anything, please I need help with this, it was my first project and I can't continue, thank you.

[paradajz]

What operating system do you use? How exactly did you start the firmware update process?

[NommarsX]

Hello, Thank you for your quick response. I work with mac os big sur, I tried to update the firmware through the web configuration utility, it updated and I can't get out of bootloader mode. Thank you! El jue, 15 jun 2023 a las 7:28, paradajz ***@***.***>) escribió:

…

What operating system do you use? How exactly did you start the firmware update process? — Reply to this email directly, view it on GitHub <#207 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/A7CB7AFZ2CP6GJUGILIH3LLXLKMQFANCNFSM6AAAAAAZHBIPWI> . You are receiving this because you authored the thread.Message ID: ***@***.*** com>

[eurorackworld]

sounds a bit like my issue. I have a mac too, and once had an issue, we found out it could be a mac thing. Are you able to try the same process on Windows?

[paradajz]

On the M board there are two 2-pin headers below the USB connector: the left one (BOOT) and the right one (RPB). Short circuit the right one and then connect the board to your PC. A new disk drive will appear. Remove the short circuit. Drag the opendeck22.uf2 file to a newly shown disk drive and wait until the board reboots.

You can get the uf2 file from here: https://github.com/shanteacontrols/OpenDeck/releases/tag/v7.5.1

[NommarsX]

Hello, sorry for taking so long to answer, I was on a work trip, solved, Thanks for the help, I wanted to take the opportunity to ask something else, maybe a little silly question but I'm very new to this and do not know very well how I can program the board through sysex, with what app or tool. Thanks for the help and congratulations for your work! El jue, 15 jun 2023 a las 15:01, paradajz ***@***.***>) escribió:

…

On the M board there are two 2-pin headers below the USB connector: the left one (BOOT) and the right one (RPB). Short circuit the right one and then connect the board to your PC. A new disk drive will appear. Remove the short circuit. Drag the opendeck22.uf2 file there and wait until the board reboots. You can get the uf2 file from here: https://github.com/shanteacontrols/OpenDeck/releases/tag/v7.5.1 — Reply to this email directly, view it on GitHub <#207 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/A7CB7AF7RC5RQDGMCJ564FDXLMBT5ANCNFSM6AAAAAAZHBIPWI> . You are receiving this because you authored the thread.Message ID: ***@***.*** com>