diff --git a/docs/advanced/advanced.md b/docs/advanced/advanced.md
index 37e2ac7..5882453 100644
--- a/docs/advanced/advanced.md
+++ b/docs/advanced/advanced.md
@@ -84,8 +84,8 @@ The BLE parameters can be changed with the commands detailed into [BLE gateway u
 If connected to an MQTT broker, the bridge configuration can be erased with an [MQTT command](https://docs.openmqttgateway.com/use/gateway.html#erase-the-esp-settings) or the button available in HA "SYS: Erase credentials".
 If not connected to an MQTT broker you can reset the board by following the procedure below:
 * Connect the bridge to your computer with a USB cable
-* Go to the upload portal https://docs.openmqttgateway.com/upload/web-install.html
-* Select "theengs-bridge", and keep "Erase Flash" selected
+* Go to the [upload portal](https://docs.openmqttgateway.com/upload/web-install.html)
+* Select "theengs-bridge" if you have TBRIDGE01 and "theengs-bridge-v11" if you have TBRIDGE02, and keep "Erase Flash" selected
 * Click on INSTALL, and wait a few minutes
 * The bridge will have now the latest version and the settings erased