From 4275500e18a1ada4d228723b93dbade84e5a72bd Mon Sep 17 00:00:00 2001 From: Florian Date: Tue, 14 Jan 2025 06:05:08 -0600 Subject: [PATCH] Update advanced.md --- docs/advanced/advanced.md | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/docs/advanced/advanced.md b/docs/advanced/advanced.md index 37e2ac7..5882453 100644 --- a/docs/advanced/advanced.md +++ b/docs/advanced/advanced.md @@ -84,8 +84,8 @@ The BLE parameters can be changed with the commands detailed into [BLE gateway u If connected to an MQTT broker, the bridge configuration can be erased with an [MQTT command](https://docs.openmqttgateway.com/use/gateway.html#erase-the-esp-settings) or the button available in HA "SYS: Erase credentials". If not connected to an MQTT broker you can reset the board by following the procedure below: * Connect the bridge to your computer with a USB cable -* Go to the upload portal https://docs.openmqttgateway.com/upload/web-install.html -* Select "theengs-bridge", and keep "Erase Flash" selected +* Go to the [upload portal](https://docs.openmqttgateway.com/upload/web-install.html) +* Select "theengs-bridge" if you have TBRIDGE01 and "theengs-bridge-v11" if you have TBRIDGE02, and keep "Erase Flash" selected * Click on INSTALL, and wait a few minutes * The bridge will have now the latest version and the settings erased