false. It is an OR relationship with GUI Block Domainfalsetype is A/AAAA, default falsefalsefalsefalse, if true then use bypass DNS to resolve. It is an OR relationship with GUI Bypass Domainfalsefalse. If true and domainaddress, then ipaddress or ipaddressfrombypassdns must be specified. It is an OR relationship with GUI Bypass IPfalse. If true and domainaddress, then ipaddress or ipaddressfrombypassdns must be specifiedBrook GUI 会在不同时机向脚本传入不同的全局变量，脚本只需要将处理结果赋值到全局变量 out 即可
false. 与 GUI Block Domain 是或的关系falsetype 为 A/AAAA有效，默认 falsefalse, 如果为 true 则使用 Bypass DNS 来解析. 与 GUI Bypass Domain 是或的关系falsefalse. 如果为 true 并且是 domainaddress, 那么必须指定 ipaddress 或 ipaddressfrombypassdns. 与 GUI Bypass IP 是或的关系false. 如果为 true 并且是 domainaddress, 那么必须指定 ipaddress 或 ipaddressfrombypassdnsList some examples of common scene commands, pay attention to replace the parameters such as IP, port, password, domain name, certificate path, etc. in the example by yourself
+brook server --listen :9999 --password hello
+then
+ +1.2.3.4:9999helloor get brook link
+ +brook link --server 1.2.3.4:9999 --password hello --name 'my brook server'
+or get brook link with --udpovertcp
brook link --server 1.2.3.4:9999 --password hello --udpovertcp --name 'my brook server'
+brook wsserver --listen :9999 --password hello
+then
+ +ws://1.2.3.4:9999helloor get brook link
+ +brook link --server ws://1.2.3.4:9999 --password hello --name 'my brook wsserver'
+or get brook link with domain, even if that's not your domain
+ +brook link --server ws://hello.com:9999 --password hello --address 1.2.3.4:9999 --name 'my brook wsserver'
+++ +Make sure your domain has been resolved to your server IP successfully. Automatic certificate issuance requires the use of port 80
+
brook wssserver --domainaddress domain.com:443 --password hello
+then
+ +wss://domain.com:443helloor get brook link
+ +brook link --server wss://domain.com:443 --password hello --name 'my brook wssserver'
+++ +Make sure your domain has been resolved to your server IP successfully
+
brook wssserver --domainaddress domain.com:443 --password hello --cert /root/cert.pem --certkey /root/certkey.pem
+then
+ +wss://domain.com:443helloor get brook link
+ +brook link --server wss://domain.com:443 --password hello --name 'my brook wssserver'
+Install mad
+ +nami install mad
+Generate root ca
+ +mad ca --ca /root/ca.pem --key /root/cakey.pem
+Generate domain cert by root ca
+ +mad cert --ca /root/ca.pem --ca_key /root/cakey.pem --cert /root/cert.pem --key /root/certkey.pem --domain domain.com
+Run brook
+ +brook wssserver --domainaddress domain.com:443 --password hello --cert /root/cert.pem --certkey /root/certkey.pem
+get brook link with --insecure
brook link --server wss://domain.com:443 --password hello --name 'my brook wssserver' --address 1.2.3.4:443 --insecure
+or get brook link with --ca
brook link --server wss://domain.com:443 --password hello --name 'my brook wssserver' --address 1.2.3.4:443 --ca /root/ca.pem
+Better performance, but data is not strongly encrypted using Brook protocol. So please use certificate encryption, and it is not recommended to use --withoutBrookProtocol and --insecure together
+++ +Make sure your domain has been resolved to your server IP successfully. Automatic certificate issuance requires the use of port 80
+
brook wssserver --domainaddress domain.com:443 --password hello --withoutBrookProtocol
+get brook link
+ +brook link --server wss://domain.com:443 --password hello --withoutBrookProtocol
+++ +Make sure your domain has been resolved to your server IP successfully
+
brook wssserver --domainaddress domain.com:443 --password hello --cert /root/cert.pem --certkey /root/certkey.pem --withoutBrookProtocol
+get brook link
+ +brook link --server wss://domain.com:443 --password hello --name 'my brook wssserver' --withoutBrookProtocol
+Install mad
+ +nami install mad
+Generate root ca
+ +mad ca --ca /root/ca.pem --key /root/cakey.pem
+Generate domain cert by root ca
+ +mad cert --ca /root/ca.pem --ca_key /root/cakey.pem --cert /root/cert.pem --key /root/certkey.pem --domain domain.com
+Run brook wssserver
+ +brook wssserver --domainaddress domain.com:443 --password hello --cert /root/cert.pem --certkey /root/certkey.pem --withoutBrookProtocol
+Get brook link
+ +brook link --server wss://domain.com:443 --password hello --withoutBrookProtocol --address 1.2.3.4:443 --ca /root/ca.pem
+brook socks5 --listen :1080 --socks5ServerIP 1.2.3.4
+then
+ +1.2.3.4:1080or get brook link
+ +brook link --server socks5://1.2.3.4:1080
+brook socks5 --listen :1080 --socks5ServerIP 1.2.3.4 --username hello --password world
+then
+ +1.2.3.4:1080helloworldor get brook link
+ +brook link --server socks5://1.2.3.4:1080 --username hello --password world
+brook relayoverbrook ... --from 127.0.0.1:5353 --to 8.8.8.8:53
+brook dnsserveroverbrook ... --listen 127.0.0.1:53
+No need to manipulate iptables!
+ +opkg update
+opkg install ca-certificates openssl-util ca-bundle coreutils-nohup iptables iptables-mod-tproxy iptables-mod-socket ip6tables
+brook tproxy --link 'brook://...' --dnsListen :5353
+No need to manipulate iptables!
+ +systemctl stop systemd-resolved
+systemctl disable systemd-resolved
+echo nameserver 8.8.8.8 > /etc/resolv.conf
+brook tproxy --link 'brook://...' --dnsListen 192.168.1.2:53 --disableAAAA
+Replace 192.168.1.2 with your Linux IP. You may need to manually configure the computer or mobile gateway and DNS.
+No need to manipulate iptables!
+ +port 9999, 8888, 5353 will be used. It work with brook server, brook wsserver, brook wssserver and brook quicserver.
+ +brook relay --from :9999 --to 1.2.3.4:9999
+brook socks5tohttp --socks5 127.0.0.1:1080 --listen 127.0.0.1:8010
+brook pac --listen 127.0.0.1:8080 --proxy 'SOCKS5 127.0.0.1:1080; SOCKS 127.0.0.1:1080; DIRECT' --bypassDomainList ...
+brook pac --file proxy.pac --proxy 'SOCKS5 127.0.0.1:1080; SOCKS 127.0.0.1:1080; DIRECT' --bypassDomainList ...
+下面列举一些常用场景命令的例子, 注意自己替换示例中的 IP，端口，密码，域名，证书路径等参数
+brook server --listen :9999 --password hello
+然后
+ +1.2.3.4:9999hello或 获取 brook link
+ +brook link --server 1.2.3.4:9999 --password hello --name 'my brook server'
+或 获取 brook link 让 udp 走 tcp --udpovertcp
brook link --server 1.2.3.4:9999 --password hello --udpovertcp --name 'my brook server'
+brook wsserver --listen :9999 --password hello
+然后
+ +ws://1.2.3.4:9999hello或 获取 brook link
+ +brook link --server ws://1.2.3.4:9999 --password hello --name 'my brook wsserver'
+或 获取 brook link 指定个域名, 甚至不是你自己的域名也可以
+ +brook link --server ws://hello.com:9999 --password hello --address 1.2.3.4:9999 --name 'my brook wsserver'
+++ +注意：确保你的域名已成功解析到你服务器的 IP, 自动签发证书需要额外监听 80 端口
+
brook wssserver --domainaddress domain.com:443 --password hello
+然后
+ +wss://domain.com:443hello或 获取 brook link
+ +brook link --server wss://domain.com:443 --password hello --name 'my brook wssserver'
+++ +注意：确保你的域名已成功解析到你服务器的 IP
+
brook wssserver --domainaddress domain.com:443 --password hello --cert /root/cert.pem --certkey /root/certkey.pem
+然后
+ +wss://domain.com:443hello或 获取 brook link
+ +brook link --server wss://domain.com:443 --password hello --name 'my brook wssserver'
+安装 mad
+ +nami install mad
+使用 mad 生成根证书
+ +mad ca --ca /root/ca.pem --key /root/cakey.pem
+使用 mad 由根证书派发 domain.com 证书
+ +mad cert --ca /root/ca.pem --ca_key /root/cakey.pem --cert /root/cert.pem --key /root/certkey.pem --domain domain.com
+运行 brook
+ +brook wssserver --domainaddress domain.com:443 --password hello --cert /root/cert.pem --certkey /root/certkey.pem
+获取 brook link 使用 --insecure
brook link --server wss://domain.com:443 --password hello --name 'my brook wssserver' --address 1.2.3.4:443 --insecure
+或 获取 brook link 使用 --ca
brook link --server wss://domain.com:443 --password hello --name 'my brook wssserver' --address 1.2.3.4:443 --ca /root/ca.pem
+性能更好，但数据不使用 Brook 协议进行强加密。所以请使用证书加密，并且不建议--withoutBrookProtocol 和--insecure 一起使用
+++ +注意：确保你的域名已成功解析到你服务器的 IP, 自动签发证书需要额外监听 80 端口
+
brook wssserver --domainaddress domain.com:443 --password hello --withoutBrookProtocol
+获取 brook link
+ +brook link --server wss://domain.com:443 --password hello --withoutBrookProtocol
+++ +注意：确保你的域名已成功解析到你服务器的 IP
+
brook wssserver --domainaddress domain.com:443 --password hello --cert /root/cert.pem --certkey /root/certkey.pem --withoutBrookProtocol
+获取 brook link
+ +brook link --server wss://domain.com:443 --password hello --name 'my brook wssserver' --withoutBrookProtocol
+安装 mad
+ +nami install mad
+使用 mad 生成根证书
+ +mad ca --ca /root/ca.pem --key /root/cakey.pem
+使用 mad 由根证书派发 domain.com 证书
+ +mad cert --ca /root/ca.pem --ca_key /root/cakey.pem --cert /root/cert.pem --key /root/certkey.pem --domain domain.com
+运行 brook wssserver
+ +brook wssserver --domainaddress domain.com:443 --password hello --cert /root/cert.pem --certkey /root/certkey.pem --withoutBrookProtocol
+获取 brook link
+ +brook link --server wss://domain.com:443 --password hello --withoutBrookProtocol --address 1.2.3.4:443 --ca /root/ca.pem
+brook socks5 --listen :1080 --socks5ServerIP 1.2.3.4
+然后
+ +1.2.3.4:1080或 获取 brook link
+ +brook link --server socks5://1.2.3.4:1080
+brook socks5 --listen :1080 --socks5ServerIP 1.2.3.4 --username hello --password world
+然后
+ +1.2.3.4:1080helloworld或 获取 brook link
+ +brook link --server socks5://1.2.3.4:1080 --username hello --password world
+brook relayoverbrook ... --from 127.0.0.1:5353 --to 8.8.8.8:53
+brook dnsserveroverbrook ... --listen 127.0.0.1:53
+无需操作 iptables！
+ +opkg update
+opkg install ca-certificates openssl-util ca-bundle coreutils-nohup iptables-mod-tproxy iptables-mod-socket ip6tables iptables
+brook tproxy --link 'brook://...' --dnsListen :5353
+无需操作 iptables！
+ +systemctl stop systemd-resolved
+systemctl disable systemd-resolved
+echo nameserver 8.8.8.8 > /etc/resolv.conf
+brook tproxy --link 'brook://...' --dnsListen 192.168.1.2:53 --disableAAAA
+替换 192.168.1.2 为你的 Linux 的IP. 配置其他机器的网关和 DNS 为这台机器的 IP 即可
+无需操作 iptables！
+ +端口 9999, 8888, 5353 将会被使用. 它与 brook server, brook wsserver, brook wssserver, brook quicserver 一起工作.
+ +brook relay --from :9999 --to 1.2.3.4:9999
+brook socks5tohttp --socks5 127.0.0.1:1080 --listen 127.0.0.1:8010
+brook pac --listen 127.0.0.1:8080 --proxy 'SOCKS5 127.0.0.1:1080; SOCKS 127.0.0.1:1080; DIRECT' --bypassDomainList ...
+brook pac --file proxy.pac --proxy 'SOCKS5 127.0.0.1:1080; SOCKS 127.0.0.1:1080; DIRECT' --bypassDomainList ...
+