From 92e12934c0a653d7fb2f166beca7b5de77c0a5e2 Mon Sep 17 00:00:00 2001
From: Naomi Pentrel <5212232+npentrel@users.noreply.github.com>
Date: Mon, 16 Dec 2024 17:20:27 +0100
Subject: [PATCH] DOCS-3254: Update make-a-plant-watering-robot

---
 docs/tutorials/projects/make-a-plant-watering-robot.md | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/docs/tutorials/projects/make-a-plant-watering-robot.md b/docs/tutorials/projects/make-a-plant-watering-robot.md
index d79a623c97..b3a3d1e3f0 100644
--- a/docs/tutorials/projects/make-a-plant-watering-robot.md
+++ b/docs/tutorials/projects/make-a-plant-watering-robot.md
@@ -15,7 +15,7 @@ date: "2023-03-29"
 # updated: "2024-04-19"
 cost: 150
 no_list: true
-# SMES: Olivia Miller, Sierra Guequierre, Hazal Mestci
+# SMES: Olivia Miller, Sierra Guequierre
 ---
 
 <!-- LEARNING GOALS:
@@ -239,7 +239,9 @@ Add the mcp300x-adc-sensor module to your robot in 3 steps:
 4. Click **Create** to add this module to your machine.
 5. Find your module's card on the **CONFIGURE** page.
    In the attributes field, add the necessary attributes as `"channel_map"` and `"sensor_pin"`.
-   For example, if you have a moisture sensor on channel 0, and your `sensor_pin` is 8, your configuration should look like this:
+   `sensor_pin` is the GPIO pin number of the Raspberry Pi's pin you connected to the MCP300x chip.
+   If you followed the wiring in this tutorial, this will be 8 which is `24 GPIO 8 (SPI Chip Select 0)`.
+   Otherwise if you are using CS1, use 7.
 
    ```json
    {