Important info

At the moment i focus on using Eagle mount files for the script and a csv file for the machine data.

Neoden YY1 CSV Generator

Goal of this Pyton script should be to generate the csv file for a Neoden YY1 Pick and Place machine.
TO reach the goal the idea is to have a csv file with all the parts that are one the machine.
The script will then do the following steps:

• read all the parts in from the mount file (at the moment Eagle)
• read all the parts from the machine file
• check which componets are on the machine and which are required
• generate the csv file for yy1 machine

Workflow

@startuml
start
partition machine {
:read machine data;
:read machine file;
}
:read parts data;
:generate placeable partlist;
:optimize partlist;
:generate placefile;
end
@enduml

machine.csv

This file contains all the components of the parts on the yy1 machine:

• id: feeder id where the part is located
• part_name: Name of the part
• part_value = Vakue of the part
• part_package = package of the part
• part_height = hight of the part
• part_nozzle = Nozzle name that should be used
• part_speed = Speed in percet for placing the part
• part_mode = Placement mode for the part
• part_comment = Free comment filed

Generator

Placement list

All Parts and the placement data should be in a comma separated file.
For Fusion 360 there is a ulp inside of the repo.

Example of the file

Name, Value, Package, xpos, ypos, angle

R1,20k,C0805,12.05,08.65,90

verify parts agains machine parts

to place the correct parts on the board some variables should be compared to place the right parts

• part_name: is it a Resistor or a Capacitor
• part_value: is it the right value 10k
• part_package: is it the right package 0805 or 1205