Scarthgap: Add Olimex i.MX8MP

conf/machine/olimex-imx8mp-evb.conf

@@ -0,0 +1,72 @@
+#@TYPE: Machine
+#@NAME: Olimex iMX8MP-SOM evaluation board
+#@SOC: i.MX8MP
+#@DESCRIPTION: Machine configuration for Olimex iMX8MP-SOM evaluation board with LPDDR4
+#@MAINTAINER: Leon Anavi <[email protected]>
+
+require conf/machine/include/imx8mp-evk.inc
+
+KERNEL_DEVICETREE_BASENAME = "imx8mp-olimex"
+
+# NXP kernel has additional DTB files for various board configuration and
+# derivates. Include them here for NXP BSP only
+KERNEL_DEVICETREE:append:use-nxp-bsp = " \
+    freescale/imx8mp-ab2.dtb \
+    freescale/imx8mp-evk-basler.dtb \
+    freescale/imx8mp-evk-basler-ov2775.dtb \
+    freescale/imx8mp-evk-basler-ov5640.dtb \
+    freescale/imx8mp-evk-dpdk.dtb \
+    freescale/imx8mp-evk-dsp.dtb \
+    freescale/imx8mp-evk-dual-basler.dtb \
+    freescale/imx8mp-evk-dual-os08a20.dtb \
+    freescale/imx8mp-evk-dual-ov2775.dtb \
+    freescale/imx8mp-evk-ecspi-slave.dtb \
+    freescale/imx8mp-evk-flexcan2.dtb \
+    freescale/imx8mp-evk-hifiberry-dacplus.dtb \
+    freescale/imx8mp-evk-inmate.dtb \
+    freescale/imx8mp-evk-iqaudio-dacplus.dtb \
+    freescale/imx8mp-evk-iqaudio-dacpro.dtb \
+    freescale/imx8mp-evk-it6263-lvds-dual-channel.dtb \
+    freescale/imx8mp-evk-jdi-wuxga-lvds-panel.dtb \
+    freescale/imx8mp-evk-ndm.dtb \
+    freescale/imx8mp-evk-os08a20.dtb \
+    freescale/imx8mp-evk-os08a20-ov5640.dtb \
+    freescale/imx8mp-evk-ov2775.dtb \
+    freescale/imx8mp-evk-ov2775-ov5640.dtb \
+    freescale/imx8mp-evk-pcie-ep.dtb \
+    freescale/imx8mp-evk-revA3-8mic-revE.dtb \
+    freescale/imx8mp-evk-rm67191.dtb \
+    freescale/imx8mp-evk-rm67199.dtb \
+    freescale/imx8mp-evk-root.dtb \
+    freescale/imx8mp-evk-rpmsg.dtb \
+    freescale/imx8mp-evk-rpmsg-lpv.dtb \
+    freescale/imx8mp-evk-sof-wm8960.dtb \
+    freescale/imx8mp-evk-spdif-lb.dtb \
+    freescale/imx8mp-evk-usdhc1-m2.dtb \
+    freescale/imx8mp-evk-8mic-swpdm.dtb \
+    freescale/imx8mp-olimex.dtb \
+"
+
+IMX_DEFAULT_BOOTLOADER:use-nxp-bsp = "u-boot-imx"
+IMX_DEFAULT_KERNEL:use-nxp-bsp = "linux-fslc"
+
+UBOOT_CONFIG_BASENAME = "imx8mp_olimex"
+UBOOT_CONFIG[fspi] = "${UBOOT_CONFIG_BASENAME}_defconfig"
+UBOOT_CONFIG[ndm]  = "${UBOOT_CONFIG_BASENAME}_ndm_defconfig"
+UBOOT_DTB_NAME = "imx8mp-evk.dtb"
+
+# Set DDR FIRMWARE
+DDR_FIRMWARE_VERSION = "202006"
+DDR_FIRMWARE_NAME = " \
+    lpddr4_pmu_train_1d_dmem_${DDR_FIRMWARE_VERSION}.bin \
+    lpddr4_pmu_train_1d_imem_${DDR_FIRMWARE_VERSION}.bin \
+    lpddr4_pmu_train_2d_dmem_${DDR_FIRMWARE_VERSION}.bin \
+    lpddr4_pmu_train_2d_imem_${DDR_FIRMWARE_VERSION}.bin \
+"
+
+IMXBOOT_TARGETS_BASENAME = "flash_evk"
+
+# Mainline BSP doesn't support LPDDR4 so it must be set to nxp.
+# Also this machine isn't supported by u-boot-fslc but imx8mn-evk.inc already
+# set the bootloader to u-boot-imx instead when NXP BSP is used.
+IMX_DEFAULT_BSP = "nxp"