KlipperScreen for FLSUN S1

KlipperScreen is a touchscreen GUI that interfaces with Klipper via Moonraker. It can switch between multiple printers to access them from a single location, and it doesn't even need to run on the same host, you can install it on another device and configure the IP address to access the printer.

Documentation

Click here to access the documentation.

About

This version of KlipperScreen is compatible with FLSUN S1, it's optimized for Delta printers.

• Latest build of KlipperScreen
• Inner/Outer Bed integration
• Drying Box integration
• Automated with prompt macros
• Some fixes and adjustments

Repository for FLSUN S1 & T1 is available here: Flsun-S1-T1

If you like my work, don't hesitate to support me by paying me a 🍺 or a ☕. Thank you 🙂

Installation

This version is already installed by default on the Open Source Edition operating system, but if you need to reinstall it, follow these steps:

• Make sure previous installation of KlipperScreen is removed (with Kiauh).

• In SSH, enter the following commands (one at a time) to install KlipperScreen:

  cd ~ && git clone https://github.com/Guilouz/KlipperScreen-Flsun-S1.git ~/KlipperScreen
  

  ./KlipperScreen/scripts/KlipperScreen-install.sh
  

• Go to your Mainsail Web interface then select the Machine tab.

• Open the moonraker.conf file and modify the [update_manager KlipperScreen] section as follows:

  [update_manager KlipperScreen]
  type: git_repo
  path: ~/KlipperScreen
  origin: https://github.com/Guilouz/KlipperScreen-Flsun-S1.git
  virtualenv: ~/.KlipperScreen-env
  requirements: scripts/KlipperScreen-requirements.txt
  system_dependencies: scripts/system-dependencies.json
  managed_services: KlipperScreen
  

• Once done, click on SAVE & RESTART at the top right to save the file.

• You can now click the refresh button (still in the Machine tab) on the Update Manager tile.

• Once installed you will have the new version of KlipperScreen and future updates will point directly to my repo.