Skip to content
Mailing list

qla2x00t-32gbit: Update version to 10.02.09.400-k #252

Sign in to view logs

qla2x00t-32gbit: Update version to 10.02.09.400-k

qla2x00t-32gbit: Update version to 10.02.09.400-k #252

Triggered via push December 28, 2024 13:31
@lnocturnolnocturno
pushed f86d0ca
master
Status Success
Total duration 4m 46s
Artifacts –

mail_notification.yml

on: push
Matrix: send_mails
Fit to window
Zoom out
Zoom in

Annotations

6 warnings
qla2x00t-32gbit: Fix abort in bsg timeout Current abort of bsg on timeout prematurely clears the outstanding_cmds[]. Abort does not allow FW to return the IOCB/SRB. In addition, bsg_job_done() is not called to return the BSG (i.e. leak). Abort the outstanding bsg/SRB and wait for the completion. The completion IOCB will wake up the bsg_timeout thread. If abort is not successful, then driver will forcibly call bsg_job_done() and free the srb. Err Inject: - qaucli -z - assign CT Passthru IOCB's Nport...
ubuntu-latest pipelines will use ubuntu-24.04 soon. For more details, see https://github.com/actions/runner-images/issues/10636
qla2x00t-32gbit: Fix use after free on unload System crash is observed with stack trace warning of use after free. There are 2 signals to tell dpc_thread to terminate (UNLOADING flag and kthread_stop). On setting the UNLOADING flag when dpc_thread happens to run at the time and sees the flag, this causes dpc_thread to exit and clean up itself. When kthread_stop is called for final cleanup, this causes use after free. Remove UNLOADING signal to terminate dpc_thread. Use the kthread_stop as the main si...
ubuntu-latest pipelines will use ubuntu-24.04 soon. For more details, see https://github.com/actions/runner-images/issues/10636
qla2x00t-32gbit: Remove check req_sg_cnt should be equal to rsp_sg_cnt Firmware supports multiple sg_cnt for request and response for CT commands, so remove the redundant check. A check is there where sg_cnt for request and response should be same. This is not required as driver and FW have code to handle multiple and different sg_cnt on request and response. Cc: [email protected] Signed-off-by: Saurav Kashyap <[email protected]> Signed-off-by: Nilesh Javali <[email protected]> Link: https://...
ubuntu-latest pipelines will use ubuntu-24.04 soon. For more details, see https://github.com/actions/runner-images/issues/10636
qla2x00t-32gbit: Fix NVMe and NPIV connect issue NVMe controller fails to send connect command due to failure to locate hw context buffer for NVMe queue 0 (blk_mq_hw_ctx, hctx_idx=0). The cause of the issue is NPIV host did not initialize the vha->irq_offset field. This field is given to blk-mq (blk_mq_pci_map_queues) to help locate the beginning of IO Queues which in turn help locate NVMe queue 0. Initialize this field to allow NVMe to work properly with NPIV host. kernel: nvme nvme5: Connect comma...
ubuntu-latest pipelines will use ubuntu-24.04 soon. For more details, see https://github.com/actions/runner-images/issues/10636
qla2x00t-32gbit: Supported speed displayed incorrectly for VPorts The fc_function_template for vports was missing the .show_host_supported_speeds. The base port had the same. Add .show_host_supported_speeds to the vport template as well. Cc: [email protected] Fixes: 2c3dfe3f6ad8 ("[SCSI] qla2xxx: add support for NPIV") Signed-off-by: Anil Gurumurthy <[email protected]> Signed-off-by: Nilesh Javali <[email protected]> Link: https://lore.kernel.org/r/[email protected]...
ubuntu-latest pipelines will use ubuntu-24.04 soon. For more details, see https://github.com/actions/runner-images/issues/10636
qla2x00t-32gbit: Update version to 10.02.09.400-k Signed-off-by: Nilesh Javali <[email protected]> Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Himanshu Madhani <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]> [ commit 35002a8ec557 upstream ]
ubuntu-latest pipelines will use ubuntu-24.04 soon. For more details, see https://github.com/actions/runner-images/issues/10636