Merge pull request #1496 from cure123123/docusaurus-version

update XIAO wiki( text correction)
Seeed-Studio · Aug 6, 2024 · f198acf · f198acf
2 parents 1a1563c + 3b36fa9
commit f198acf
Show file tree

Hide file tree

Showing 2 changed files with 3 additions and 3 deletions.
diff --git a/docs/Sensor/SeeedStudio_XIAO/SeeedStudio_XIAO_SAMD21/Seeeduino-XIAO-by-Nanase.md b/docs/Sensor/SeeedStudio_XIAO/SeeedStudio_XIAO_SAMD21/Seeeduino-XIAO-by-Nanase.md
@@ -115,7 +115,7 @@ Contrary to the original Arduino, it is turned on at LOW and turned off at HIGH.
 
 The official website describes two other built-in LEDs as `two LEDs for serial port downloading`. However, looking at the schematic, there is no physical pin connected to these RX and TX LEDs.
 
-If you look at [USBCore.cpp](https://github.com/Seeed-Studio/ArduinoCore-samd/blob/1.7.2/cores/arduino/USB/USBCore.cpp#L622-L627) here, you can see that they are turned on by `digitalWrite` every time serial USB transmission / reception occurs, which means that the two LEDs are are programmable.
+If you look at [USBCore.cpp](https://github.com/Seeed-Studio/ArduinoCore-samd/blob/1.7.2/cores/arduino/USB/USBCore.cpp#L622-L627) here, you can see that they are turned on by `digitalWrite` every time serial USB transmission / reception occurs, which means that the two LEDs are programmable.
 
 ```cpp
 uint32_t USBDeviceClass::recv(uint32_t ep, void *_data, uint32_t len)
@@ -305,7 +305,7 @@ Temp: 22.05 °C, Humidity: 44.72 %, Pressure: 1008.9 hPa
 Temp: 22.06 °C, Humidity: 44.81 %, Pressure: 1008.9 hPa
 ```
 
-## UART
+### UART
 
 As mentioned earlier, the physical UART pins are different from those on the USB CDC. `Serial1` is used for serial communication using the TX and RX pins.
 

diff --git a/docs/Sensor/SeeedStudio_XIAO/SeeedStudio_XIAO_SAMD21/XIAO-SAMD21-MicroPython.md b/docs/Sensor/SeeedStudio_XIAO/SeeedStudio_XIAO_SAMD21/XIAO-SAMD21-MicroPython.md
@@ -43,7 +43,7 @@ First, we are going to connect the Seeed Studio XIAO SAMD21 to the computer and
 <div align="center"><img width={550} src="https://files.seeedstudio.com/wiki/XIAO-RP2040/img/micropython/board_8.png" /></div>
 
 
-- **Step 4**. Chose the "Interpreter" interface and select the device as **"MicroPython(generic)"** and the port as **"Try to detect prot automatically"**
+- **Step 4**. Chose the "Interpreter" interface and select the device as **"MicroPython(generic)"** and the port as **"Try to detect port automatically"**
 
 <div align="center"><img width={550} src="https://files.seeedstudio.com/wiki/XIAO_SAMD/img/1.jpg" /></div>