markdown file for nozzlecam set up

OctoPrint-NozzleCam Configuration.md

@@ -0,0 +1,31 @@
+# OctoPrint-NozzleCam Configuration
+## _First Layer AI Failure Detection_
+
+[![N|Solid](https://play-lh.googleusercontent.com/rz4zy00-EI-LrPVaXw96YRcvh8rByPSBGH5JY9dK7h4niwzQAVnKfb8oX2J1v9mCjg=w3840-h2160-rw)](https://obico.io)
+
+# Requirements
+
+- Nozzle camera set up & configured in OctoPrint 
+- Configure you nozzle camera snapshot url in Obico (You should have received this in the sign up email)
+
+This set up is much simpler than moonraker / klipper but here is a more detailed walkthrough if need be.
+
+### Nozzle Camera
+Pretty straightforward. 
+- Buy & attach a nozzle camera to your 3D printer. Connect the USB to your Pi / SBC.
+- Once it's all connected, configure your new camera in OctoPrint.
+- Make sure the snapshot URL is working. (you will need this URL for the next step)
+
+### Installation
+If you have received the Alpha testing sign up link, open the configuration URL.
+- Select the printer you'd like to configure from the dropdown. 
+- Take the snapshot URL from the previous step & insert it into the text input.
+- Click save.
+
+### Layer Configuration
+
+Please make sure layer progress is working properly / as expected. First layer shows 1/xxx in Obico etc. This is crutial to the success of this model. 
+
+We preprocess every file on OctoPrint to find layer changes so no action needed on your end, just make sure it is working properly.
+
+# Thank you!