Banish still more Berlios URLs.

gpscap.ini

@@ -211,7 +211,7 @@ rating = good
 
 [Sony CXD2951]
 type = engine
-techdoc = http://gpsd.berlios.de/vendor-docs/cxd2951-commands.pdf
+techdoc = http://gpsd.googlecode.com/files/cxd2951-commands.pdf
 engine = Sony CXD2951
 rating = good
 
@@ -285,7 +285,7 @@ vendor_site = http://www.adapt-mobile.com>
 
 [Axiom]
 type = vendor
-vendor_site = http://gpsd.berlios.de/vendor-docs/axiom
+vendor_site = http://code.google.com/p/gpsd/downloads/detail?name=SiRF-Axiom.pdf&can=2&q=
 
 [Billionton]
 type = vendor
@@ -523,7 +523,7 @@ submitter = Dennis van Zuijlekom <[email protected]>.
 type = device
 vendor = Axiom
 packaging = OEM module
-techdoc = http://gpsd.berlios.de/vendor-docs/axiom
+techdoc = http://code.google.com/p/gpsd/downloads/detail?name=SiRF-Axiom.pdf&can=2&q=
 uses = SiRF-1
 interfaces = RS232C
 tested = 2.34
@@ -1029,9 +1029,8 @@ tested = regression
 rating = excellent
 eval_unit = esr
 nmea = 2.2
-notes = Older versions of the BU-303 had a
-	<a href='http://gpsd.berlios.de/bu_303b.html'>design
-	defect</a> that made it likely to fail if subjected to vibration or
+notes = Older versions of the BU-303 had a design defect that made it 
+        likely to fail if subjected to vibration or hard shocks.
 
 [BU-353]
 type = device

repo/README

@@ -1,16 +1,12 @@
-The repo directory contains the git configuration files and hooks as
-used at berlios. Here follows a short description of the files and
+The repo directory contains git configuration files and hooks as
+used at Berlios. Here follows a short description of the files and
 what they do:
 
 description: Description of the project as displayed by gitweb/cgit.
 
 config: Repository configuration, including config details for the
         hooks.
 
-hooks/acl.sh: see hooks/update
-
-hooks/ciabot.py: see hooks/update
-
 hooks/post-receive: This script is run after receive-pack has accepted a
                     pack and the repository has been updated.
                     Currently passes stdin to post-receive-email.sh
@@ -26,13 +22,8 @@ hooks/post-update: Runs after the update hook. Executes
                    to update the auxiliary info file to help dumb
                    servers (needed to clone via http)
 
-hooks/update: This script does some sanity checks on the pushed commits
-              before accepting them, see the description on top of the
-              file for details. It also runs hooks/acl.sh, which is a
-              berlios specific script to set/update acls on the
-              repository - usually such a script should not be
-              necessary at all. In case all checks were passed,
-              hooks/ciabot.sh is called to show all commits in #gpsd.
+hooks/update-custom: Append to the standard update hook script.  Calls
+                     ciabot.py, which you must also install.
 
 The executable script "upload" can be used to update the repo copies with
 files from this directory.  Give it arguments to upload specified filenames,

repo/config

@@ -1,15 +1,13 @@
-[core]
-        repositoryformatversion = 0
-        filemode = true
-        bare = true
-        logallrefupdates = true
-	sharedrepository = group
+# Extra attributes to add to git config if the hosting site allows hacking it.
+# When the project was hosted on Berlios, this was what it used.
+# Replace MAILHOST with the mailing list host.
+
 [gitweb]
-	owner = esr dbrashear remco nelsonrn garyemiller ckuethe wkazubski marr jfrancis mick_durkin bzed gdt mledford
+	owner = esr
 [hooks]
-	mailinglist = gpsd-commit-watch@lists.berlios.de
-	announcelist = gpsd-announce@lists.berlios.de
-	envelopesender = gpsd-dev@lists.berlios.de
+	mailinglist = gpsd-commit-watch@MAILHOST
+	announcelist = gpsd-announce@MAILHOST
+	envelopesender = gpsd-dev@MAILHOST
 	emailprefix = ""
 	allowunannotated = true
 	allowdeletebranch = true
@@ -19,5 +17,4 @@
 	showrev = "git show -C %s; echo"
 [ciabot]
         project = GPSD
-	# Berlios blocks outbound mail.
         xmlrpc = true