Create README.md

[ErrolAntonyRodrigues2008]

Submission Checklist:

• [ X ] I am a current high school, middle school, or home schooled student.

  • [ X ] I am 18 or under
  • [ X ] I have filled out the verification form (do this for every pull request)
    • or the legacy verification form if the above doesn't work

• [ X ] I have joined the #electronics channel on Slack

• [ X ] I made this board from scratch, even if I followed a tutorial

• [ X ] I have followed the directions in README.md

  • [ X ] Created a folder under onboard/projects
  • [ X ] Filled out TEMPLATE.md as README.md inside your project folder
  • [ X ] Uploaded gerber.zip and schematic.pdf inside your project folder
  • [ X ] Created a folder called src and uploaded design files
  • [ X ] Uploaded screenshot of PCB order called cart.png with all costs included
  • [ X ] I am ordering the smallest batch size (ie. JLCPCB's smallest order is for 5 boards)
  • [ X ] If outside the US I've checked that I can afford the customs charges in my country (which isn't covered by the grant)

• (Optional) This project is from a tutorial¹.

• (Optional) This project is for OnBoard Live².

• [ X ] (Optional) This project is for Hacky Holidays³.

• (Optional) I'm in a FIRST (FRC, FTC, FLL, etc.) team. The number is: ____

Footnotes

1. Projects from a tutorial are 100% fine! We just want to ask so we can count how people are using tutorials. ↩

2. OnBoard Live is a special version of OnBoard where you can earn more money for designing advanced boards. Check out the #onboard-live channel on our Slack! ↩

3. Hacky Holidays is a limited time PCB event, design a holiday-themed PCB this Winter, and get it shipped. ↩

[prophetorpheus]

Hi, I'm Orpheus Leap! Here to help you review your PR.

projects/hacky-holiday:

Required files

✅	README.md	A description of your project
✅	cart.png
✅	gerber.zip
✅	schematic.pdf	Manually check schematic.pdf
✅	Source files - EasyEDA	Found both PCB and SCH files

You can view a render of your board over on gerber.zip/2d!

Happy OnBoarding!
_{This bot is a simpler helper for common submission types. If there's an error with this, please point it out and someone from the OnBoard team will look at it manually.}

[ErrolAntonyRodrigues2008]

gerber.zip.zip

[ErrolAntonyRodrigues2008]

[ErrolAntonyRodrigues2008]

ive submitted the files after renaming them

[ErrolAntonyRodrigues2008]

Hi, I'm Orpheus Leap! Here to help you review your PR.
projects/hacky-holiday:

Required files

✅ README.md A description of your project
❌ cart.png You need to include a screenshot of your JLCPCB. Check out these instructions. If you already have one, make sure it's a PNG file named exactly "cart.png".
❌❌❌Cannot find a Gerber File. Please export a gerber from your PCB Design software and name it exactly "gerber.zip". Happy OnBoarding! This bot is a simpler helper for common submission types. If there's an error with this, please point it out and someone from the OnBoard team will look at it manually.

gerber.zip.zip

[Pegoku]

Hi, please rename the gerber file of your PR. If you don't know how, I can do it for you

[ErrolAntonyRodrigues2008]

Yes please, if could could do it for me it would be great. Thanks

…

On Sun, Dec 29, 2024, 9:15 PM Pere Gomila ***@***.***> wrote: Hi, please rename the gerber file of your PR. If you don't know how, I can do it for you — Reply to this email directly, view it on GitHub <#1377 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/BL66RS36VVAB57MHIQJAFWL2IAKIBAVCNFSM6AAAAABUJPPKH6VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDKNRUG43DGMRUGE> . You are receiving this because you authored the thread.Message ID: ***@***.***>

[Pegoku]

Hi, please use the correct cart screenshot, it should look something like this

[Pegoku]

Also, please do the verification form

[ErrolAntonyRodrigues2008]

On Mon, Dec 30, 2024, 9:32 PM Pere Gomila ***@***.***> wrote: Hi, please use the correct cart screenshot, it should look something like this image.png (view on web) <https://github.com/user-attachments/assets/54443bbf-9ff5-49fc-96e3-ec95b97b8036> — Reply to this email directly, view it on GitHub <#1377 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/BL66RS3UB32PYBWTWTCCKT32IFVCTAVCNFSM6AAAAABUJPPKH6VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDKNRVGY3DAOBSGE> . You are receiving this because you authored the thread.

Ok

…

Message ID: ***@***.***>

[ErrolAntonyRodrigues2008]

I've already filled the verification form, isn't it the same as the High Seas one

…

On Mon, Dec 30, 2024, 9:34 PM Pere Gomila ***@***.***> wrote: Also, please do the verification form — Reply to this email directly, view it on GitHub <#1377 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/BL66RS2BGM2EJPHRIZIR2J32IFVJDAVCNFSM6AAAAABUJPPKH6VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDKNRVGY3DENZTGU> . You are receiving this because you authored the thread.Message ID: ***@***.***>

[Pegoku]

Your files are all correct but it seems like you haven't done the verification form - we need this info to contact you and send your grant! Thank you!

[ErrolAntonyRodrigues2008]

I've already filled the verification form, isn't it the same as the High Seas one
…
On Mon, Dec 30, 2024, 9:34 PM Pere Gomila @.> wrote: Also, please do the verification form — Reply to this email directly, view it on GitHub <#1377 (comment)>, or unsubscribe https://github.com/notifications/unsubscribe-auth/BL66RS2BGM2EJPHRIZIR2J32IFVJDAVCNFSM6AAAAABUJPPKH6VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDKNRVGY3DENZTGU . You are receiving this because you authored the thread.Message ID: @.>

Ive filled the verification form

[ErrolAntonyRodrigues2008]

[ErrolAntonyRodrigues2008]

Ive uploaded the updated cart.png

[ErrolAntonyRodrigues2008]

I've submitted all the corrections as required and also filled the form

…

On Mon, Dec 30, 2024 at 9:44 PM Pere Gomila ***@***.***> wrote: Your files are all correct but it seems like you haven't done the verification form <https://verify.onboard.hackclub.com/> - we need this info to contact you and send your grant! Thank you! — Reply to this email directly, view it on GitHub <#1377 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/BL66RS52PEY65QZLPMSXGKD2IFWODAVCNFSM6AAAAABUJPPKH6VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDKNRVGY3TGNJSG4> . You are receiving this because you authored the thread.Message ID: ***@***.***>

[Pegoku]

Hi, Sorry, I didn't see it was for HackyHollydays. My Bad.

[ErrolAntonyRodrigues2008]

No worries.

…

On Wed, Jan 1, 2025, 12:48 AM Pere Gomila ***@***.***> wrote: Hi, Sorry, I didn't see it was for HackyHollydays. My Bad. — Reply to this email directly, view it on GitHub <#1377 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/BL66RS3QPOQAP5M3VGRJX432ILUZRAVCNFSM6AAAAABUJPPKH6VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDKNRWGY3DSNRXGE> . You are receiving this because you authored the thread.Message ID: ***@***.***>

[ErrolAntonyRodrigues2008]

How do I get the grant On Wed, Jan 1, 2025, 9:18 AM Errol Antony Rodrigues < ***@***.***> wrote:

…

No worries. On Wed, Jan 1, 2025, 12:48 AM Pere Gomila ***@***.***> wrote: > Hi, Sorry, I didn't see it was for HackyHollydays. My Bad. > > — > Reply to this email directly, view it on GitHub > <#1377 (comment)>, > or unsubscribe > <https://github.com/notifications/unsubscribe-auth/BL66RS3QPOQAP5M3VGRJX432ILUZRAVCNFSM6AAAAABUJPPKH6VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDKNRWGY3DSNRXGE> > . > You are receiving this because you authored the thread.Message ID: > ***@***.***> >

[github-actions]

Hi, if you need any assistance, please don't hesitate to ask here or in #electronics on Slack. This pull request is being marked as 'Stalled' for now and will be closed in 3 days if there is no activity.

[ErrolAntonyRodrigues2008]

Commented

[LimesKey]

Hi @ErrolAntonyRodrigues2008, thanks for your Hacky Holidays Submission, just before we review your pull request, we need to ask you a few preliminary questions.

1. Does your PCB require a battery, either a LIR2032 or a CR2032?
2. Is your PCB complex (parts-wise) and or requires Standard Assembly?
3. About how long have you been working with electronics or PCB design?

Lastly, if you haven't done it already, we'll be needing your position and bill of materials (BOM) files. These files can be found in a .csv file format and should be in your /src directory with them named appropriately. Also, please be sure you've supplied all your JLCPCB Part or LCSC Part numbers, if you need help, please let me know or message in #hacky-holidays.

[ErrolAntonyRodrigues2008]

Ans 1) Yes, CR2032 Ans 2) Not complex Ans 3) few months

…

On Mon, Jan 13, 2025, 4:20 PM Ryan ***@***.***> wrote: ***@***.**** requested changes on this pull request. Hi @ErrolAntonyRodrigues2008 <https://github.com/ErrolAntonyRodrigues2008>, thanks for your Hacky Holidays Submission, just before we review your pull request, we need to ask you a few preliminary questions. 1. Does your PCB require a battery, either a LIR2032 or a CR2032? 2. Is your PCB complex (parts-wise) and or requires Standard Assembly? 3. About how long have you been working with electronics or PCB design? Lastly, if you haven't done it already, we'll be needing your position and bill of materials (BOM) files. These files can be found in a .csv file format and should be in your /src directory with them named appropriately. Also, please be sure you've supplied all your JLCPCB Part or LCSC Part numbers, if you need help, please let me know or message in #hacky-holidays <https://hackclub.slack.com/archives/C083SK3G5D3>. — Reply to this email directly, view it on GitHub <#1377 (review)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/BL66RS5KBEF3W3IFVTL7HGD2KOK53AVCNFSM6AAAAABUJPPKH6VHI2DSMVQWIX3LMV43YUDVNRWFEZLROVSXG5CSMV3GSZLXHMZDKNBWGI4DIOBQGE> . You are receiving this because you were mentioned.Message ID: ***@***.***>