Step 1 Installation
The Raspberry Pi 0W is a single core board, it is a 32-bit device. Make sure you download the latest 32-bit image file.
The Raspberry Pi 02W, 3, 4 and the 5 are multi-core boards, they are all 64-bit devices. These can also run 32-bit software, but it is advised to use 64-bit software to make full use of the hardware. Make sure you download the latest 64-bit image file.
Click image to download the software
I advise to use RPi Imager as your flashing software.
Now you can click on Choose OS, and scroll down and click Use custom. Now select your downloaded image file.
After you have selected your image file, you can click Choose storage, select the SD card you wish to install the Pwnagotchi software on.
It will now ask if you wish to EDIT SETTINGS or otherwise. You should select NO. We do not want to use any custom settings, as they have already been correctly set in the image file. If you have set custom settings before, click NO, CLEAR SETTINGS.
Previous: Home Next up: Connect to your Pwnagotchi