Add Legrand Keor PDU 800 reports [networkupstools/nut#616]

Signed-off-by: Jim Klimov <[email protected]>

Legrand/Legrand__Keor_PDU_800__usbhid-ups__2.7.4.1__01.dev

@@ -0,0 +1,47 @@
+# DEVICE:URL:REPORT: https://github.com/networkupstools/nut/issues/616#issuecomment-1166722226
+
+# DEVICE:COMMENT-BLOCK:
+# Device support relies on code that went into NUT v2.8.0 release;
+# the report was done on a development snapshot so dubbed "2.7.4.1".
+#
+# It outputs the current of all devices, the PDU800 doesn't support
+# metrics per output plug.
+# DEVICE:EOC
+
+battery.charge: 100
+battery.charge.low: 10
+battery.charge.warning: 20
+battery.runtime: 2520
+battery.voltage: 1.4
+battery.voltage.nominal: 1.2
+device.mfr: Legrand
+device.model: KEOR PDU 800
+device.serial:
+device.type: ups
+driver.name: usbhid-ups
+driver.parameter.pollfreq: 30
+driver.parameter.pollinterval: 2
+driver.parameter.port: auto
+driver.parameter.productid: 0038
+driver.parameter.synchronous: no
+driver.parameter.vendorid: 1cb0
+driver.version: 2.7.4-4539-gefb9ee45
+driver.version.data: Legrand HID 0.2
+driver.version.internal: 0.45
+driver.version.usb: libusb-1.0.24 (API: 0x1000108)
+input.transfer.high: 270
+input.transfer.low: 180
+input.voltage: 236
+input.voltage.nominal: 230
+output.frequency: 50
+output.voltage: 6
+ups.delay.shutdown: 20
+ups.delay.start: 30
+ups.load: 20
+ups.mfr: Legrand
+ups.model: KEOR PDU 800
+ups.productid: 0038
+ups.realpower.nominal: 480
+ups.serial:
+ups.status: OL CHRG
+ups.vendorid: 1cb0

Legrand/Legrand__Keor_PDU_800__usbhid-ups__2.8.0.1__01.dev

@@ -0,0 +1,50 @@
+# DEVICE:URL:REPORT: https://github.com/networkupstools/nut/issues/616#issuecomment-1640371303
+
+# DEVICE:COMMENT-BLOCK:
+# Voltages seemed to be off by a factor of 10. So the report author
+# experimented with neutering of `divide_by_10_conversion()` and
+# `legrand_times10M_info()` in the mapping tables.
+#
+# NOTE: The report below is not from a stock NUT release (nor snapshot),
+# but from that experiment. Voltages are bumped (or rather not-nerfed
+# by default driver logic), `1.2` => `12` etc.
+# DEVICE:EOC
+
+battery.charge: 100
+battery.charge.low: 10
+battery.charge.warning: 20
+battery.runtime: 1620
+battery.voltage: 14
+battery.voltage.nominal: 12
+device.mfr: Legrand 
+device.model: KEOR PDU 800
+device.serial:                 
+device.type: ups
+driver.name: usbhid-ups
+driver.parameter.pollfreq: 30
+driver.parameter.pollinterval: 15
+driver.parameter.port: auto
+driver.parameter.productid: 0038
+driver.parameter.synchronous: auto
+driver.parameter.vendorid: 1cb0
+driver.state: quiet
+driver.version: 2.8.0-Windows-726-g73ee107fa
+driver.version.data: Legrand HID 0.2
+driver.version.internal: 0.49
+driver.version.usb: libusb-0.1 (or compat)
+input.transfer.high: 270
+input.transfer.low: 180
+input.voltage: 236
+input.voltage.nominal: 230
+output.frequency: 50
+output.voltage: 235.6
+ups.delay.shutdown: 20
+ups.delay.start: 30
+ups.load: 32
+ups.mfr: Legrand 
+ups.model: KEOR PDU 800
+ups.productid: 0038
+ups.realpower.nominal: 480
+ups.serial:                 
+ups.status: OL CHRG
+ups.vendorid: 1cb0