Various docs: spell "man pages" as two words

Signed-off-by: Jim Klimov <[email protected]>

data/html/README.adoc

@@ -84,7 +84,8 @@ Alias /nut/ /usr/local/nut/html/
 
 - Make sure to restart your webserver.
 
-- Configure the CGI scripts.  Manpages can be found from:
+- Configure the CGI scripts.  Man pages can be found from:
++
 ----
 :; man -M /usr/local/nut/man/ upsstats.cgi
 :; man -M /usr/local/nut/man/ upsset.cgi

docs/FAQ.txt

@@ -87,7 +87,7 @@ There can be due to various reasons. To fix it, check:
 - your firewall rules. Port '3493/tcp' must be opened to incoming connections,
 - your *tcp-wrappers* configuration (`hosts.allow` and `hosts.deny`) if used.
 
-Refer to the linkman:upsd[8] and linkman:upsd.conf[5] manpages for more
+Refer to the linkman:upsd[8] and linkman:upsd.conf[5] man pages for more
 information.
 
 == I get a 'not listening on...' error from upsd.

docs/config-prereqs.txt

@@ -642,7 +642,7 @@ For NUT dependencies and build tools:
 # Note there is no direct "asciidoc" nor "a2x", just the competing project
 # "rubygem-asciidoctor" that NUT currently has no recipes for, so you can
 # not compile man/html/pdf docs here, per the default repository. See below
-# for tools from alternative repositories, which seem to work well. Manpage
+# for tools from alternative repositories, which seem to work well. Man page
 # compilation would require docbook-xml resources; older versions are in
 # this package https://slackbuilds.org/repository/15.0/system/docbook-xml/
 # and recent ones are in not-installed part of main repository:

docs/configure.txt

@@ -267,7 +267,7 @@ The possible documentation type values are:
 * `html-single` for single page HTML,
 * `html-chunked` for multi-paged HTML,
 * `pdf` for a PDF file, and
-* `man` for the usual manpages.
+* `man` for the usual man pages.
 
 Other values understood for this option are listed below:
 
@@ -280,7 +280,7 @@ Other values understood for this option are listed below:
   can not be generated.
 
 * A `--with-doc=no` quietly skips generation of all types of documentation,
-  including manpages.
+  including man pages.
 
 * A `--with-doc=skip` is used to configure some of the `make distcheck*`
   scenarios to re-use man page files built and distributed by the main

docs/man/pijuice.txt

@@ -18,7 +18,7 @@ NOTE: This man page only documents the hardware-specific features of the
 linkman:nutupsdrv[8].
 
 NOTE: This manual page was hastily adapted from related `asem` driver
-manpage based on information from the original pull request, and so
+man page based on information from the original pull request, and so
 may not fully apply to PiJuice HAT, patches from experts are welcome.
 
 SUPPORTED HARDWARE
@@ -38,7 +38,7 @@ On the PiJuice HAT, this should be `/dev/i2c-1`.
 INSTALLATION
 ------------
 
-NOTE: This section was copied from `asem` driver manpage and may not fully
+NOTE: This section was copied from `asem` driver man page and may not fully
 apply to PiJuice HAT, patches are welcome.
 
 This driver is specific to the Linux I2C API, and requires the lm_sensors
@@ -61,7 +61,7 @@ DIAGNOSTICS
 KNOWN ISSUES AND BUGS
 ---------------------
 
-NOTE: This section was copied from `asem` driver manpage and may not fully
+NOTE: This section was copied from `asem` driver man page and may not fully
 apply to PiJuice HAT, patches are welcome.
 
 The driver shutdown function is not implemented, so other arrangements must be

docs/packager-guide.txt

@@ -380,12 +380,12 @@ nut-server
 		E) nut-cgi
 
 			Deps:
-			Files: snmp-ups and powernet + manpages
+			Files: snmp-ups and powernet + man pages
 
 		F) nut-doc:
 
 			Deps:
-			Files: dummycons + manpage
+			Files: dummycons + man page
 
 		G) nut-dev:
 
@@ -395,7 +395,7 @@ nut-server
 		H) nut-scanner:
 
 			Deps: hard dependency on `libltdl`; recommends `libsnmp`, `libneon`, and the `libusb` variant (0.1 or 1.0) it was built against.
-			Files: nut-scanner tool and libnutscan + manpages
+			Files: nut-scanner tool and libnutscan + man pages
 
 
 Note: "nut" can be a meta package

docs/snmp.txt

@@ -34,7 +34,7 @@ in NUT any SNMP Agent (embedded or on a host).
 
 The new snmp-ups driver now support multiple MIBS (SNMP structures
 declaration). For more information on snmp-ups, have a look at its
-manpage (man 8 snmp-ups).
+man page (man 8 snmp-ups).
 
 	* Extending existing mib2nut information