persuader72's esphome custom components

This repository contains a collection of my custom components.

1. Installation

Clone this repository into custom_components in a folder where the your config yaml is stored.

git clone https://github.com/persuader72/esphome-components custom_components

Or copy a single selected component folder in your already exiting custom_components folder.

2. Components

shelly_dallas component

A component to support Temperature Sensor AddOn for Shelly 1/1PM, derived from the original dallas component from esphome.

To configure it is possible to follow the same schema found dallas component documentation with the following differences:

• shelly_dallas must be used as platform
• the pin configuration must be configured as in the following example

To find the sensor ID follow the same procedure in found in dallas component: https://esphome.io/components/sensor/dallas.html

shelly_dallas:
  pin_a: GPIO3
  #pin_a: GPIO1 #For Shelly Plus 2PM
  pin_b: GPIO0

sensor:
  - platform: shelly_dallas
    address: 0xCA011938282E5128
    name: "Temperature #1"
  - platform: shelly_dallas
    address: 0x0B01193807DD3128
    name: "Temperature #2"
  - platform: shelly_dallas
    address: 0x6E0119384DC70728
    name: "Temperature #3"

shelly_dht component

A patch to the dht component from esphome to make it compatible with the Temperature Sensor AddOn for Shelly 1/1PM.

sensor:
  - platform: shelly_dht
    pin: GPIO3
    pin_a: GPIO0
    temperature:
      name: "Living Room Temperature"
    humidity:
      name: "Living Room Humidity"
    update_interval: 60s